Awesome!

On Sat, Jul 16, 2011 at 9:43 AM, Nagasrinivas Pinjala <pinja...@yahoo.com>wrote:

> Jeremy, you are right. What I did not include was the path of the .hex
> file. Now everything works great.
>
> Thanks,
> Naga
>
> ------------------------------
> *From:* Jeremy Booth <jboo...@gmail.com>
> *To:* Nagasrinivas Pinjala <pinja...@yahoo.com>
> *Cc:* psas-avionics <psas-avion...@psas.pdx.edu>
> *Sent:* Saturday, July 16, 2011 2:01 AM
> *Subject:* Re: [psas-avionics] LPC2378 Programming
>
> I think you may need to specify the path of the .hex file you want to
> load.  I think relative path naming should be fine, but it looks like you
> are using absolute for everything else, so that should work too.
>
>
> -Jeremy
>
>
> On Sat, Jul 16, 2011 at 1:36 AM, Nagasrinivas Pinjala 
> <pinja...@yahoo.com>wrote:
>
>  Hi,
>
> I am not able to program the LPC2378. I have connected the programming
> jumper, and other connections are all fine. This is what I get after I try
> to program the LPC:
>
> pinjalan@mydomain:~$ /opt/isp/lpc21isp -hex -wipe -control -verify
> -PHILIPSARM can_a_bus.hex /dev/ttyUSB0 38400 12000
> Verify after copy RAM to Flash.
> Target: Philips.
> lpc21isp version 1.81
> Can't open file can_a_bus.hex
>
> But if I run a test command I get an OK result.
>
> pinjalan@mydomain:/dev$ /opt/isp/lpc21isp -detectonly -control foo
> /dev/ttyUSB0 115200 14746
> lpc21isp version 1.81
> Synchronizing (ESC to abort). OK
> Read bootcode version: 3
> 3
> Read part ID: LPC2378, 512 kiB ROM / 58 kiB SRAM (0x1700FD25)
>
> What do I do ?
>
> Thanks,
> Naga.
>
>
>
> _______________________________________________
> psas-avionics mailing list
> psas-avionics@lists.psas.pdx.edu
> http://lists.psas.pdx.edu/mailman/listinfo/psas-avionics
>
>
>
>
>
_______________________________________________
psas-avionics mailing list
psas-avionics@lists.psas.pdx.edu
http://lists.psas.pdx.edu/mailman/listinfo/psas-avionics

Reply via email to