I'm having the same problem and have for some time. This is a new series
SIS900 Ethernet controller (rev 91) and the driver in RH 8.0 does not
work with it yet. Others have reported that the latest version of the
driver in the 2.5.46 kernel does work properly. I haven't tried it yet -
if the updated driver could be compiled for the current RH kernel as a
module, I would give it a try for sure.

Cheers,

Chris Williams

On Sat, 2002-11-09 at 18:22, John Kodis wrote:
    On Sun, Nov 10, 2002 at 06:35:35AM +0800, John wrote:
    > On Sat, 9 Nov 2002, John Kodis wrote:
    > > The chipset includes an sis900 10/100 Ethernet controller.  This is
    > > also known as a RealTek 8201.  Any attempt to insmod the sis900 driver
    > > fails with a "No such device" error.  The dmesg file reports:
    > 
    > Folk here will be more interested in the report from
    > lspci -v -v
    
    Glad to oblige.  A simple lspci looks correct, as far as I can tell.
    It shows:
    
    00:00.0 Host bridge: Silicon Integrated Systems [SiS] 645DX Host
    00:01.0 PCI bridge: Silicon Integrated Systems [SiS] 5591/5592 AGP
    00:02.0 ISA bridge: Silicon Integrated Systems [SiS]: Unknown device 0962 (rev 04)
    00:02.3 FireWire (IEEE 1394): Silicon Integrated Systems [SiS] FireWire Controller
    00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE]
    00:03.0 USB Controller: Silicon Integrated Systems [SiS] 7001 (rev 0f)
    00:03.1 USB Controller: Silicon Integrated Systems [SiS] 7001 (rev 0f)
    00:03.2 USB Controller: Silicon Integrated Systems [SiS] 7001 (rev 0f)
    00:03.3 USB Controller: Silicon Integrated Systems [SiS]: Unknown device 7002
    00:04.0 Ethernet controller: Silicon Integrated Systems [SiS] SiS900 10/100 
Ethernet (rev 91)
    00:05.0 Multimedia audio controller: C-Media Electronics Inc CM8738 (rev 10)
    00:0d.0 Ethernet controller: Digital Equipment Corporation DECchip 21140 
[FasterNet] (rev 20)
    01:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA G100 [Productiva] AGP 
(rev 01)
    
    The verbose version really is quite voluminous, but if it might help,
    here goes:
    
    00:00.0 Host bridge: Silicon Integrated Systems [SiS] 645DX Host
        Subsystem: Asustek Computer, Inc.: Unknown device 8081
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- 
SERR- FastB2B-
        Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- 
<MAbort+ >SERR- <PERR-
        Latency: 32
        Region 0: Memory at f8000000 (32-bit, non-prefetchable) [size=64M]
        Capabilities: [c0] AGP version 2.0
                Status: RQ=31 SBA+ 64bit- FW+ Rate=x1,x2,x4
                Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none>
    
    00:01.0 PCI bridge: Silicon Integrated Systems [SiS] 5591/5592 AGP (prog-if 00 
[Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- 
SERR- FastB2B-
        Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR-
        Latency: 0
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
        Memory behind bridge: f7000000-f7ffffff
        Prefetchable memory behind bridge: fcf00000-febfffff
        BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
    
    00:02.0 ISA bridge: Silicon Integrated Systems [SiS]: Unknown device 0962 (rev 04)
        Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- 
SERR- FastB2B-
        Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- 
<MAbort- >SERR- <PERR-
        Latency: 0
    
    00:02.3 FireWire (IEEE 1394): Silicon Integrated Systems [SiS] FireWire Controller 
(prog-if 10 [OHCI])
        Subsystem: Asustek Computer, Inc.: Unknown device 8099
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- 
SERR- FastB2B-
        Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- 
<MAbort- >SERR- <PERR-
        Latency: 64 (1000ns min, 3000ns max)
        Interrupt: pin B routed to IRQ 10
        Region 0: Memory at f6800000 (32-bit, non-prefetchable) [size=4K]
        Expansion ROM at fcee0000 [disabled] [size=128K]
        Capabilities: [64] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=55mA 
PME(D0+,D1+,D2+,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME+
    
    00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (prog-if 80 
[Master])
        Subsystem: Asustek Computer, Inc.: Unknown device 807a
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- 
SERR- FastB2B-
        Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- 
<MAbort- >SERR- <PERR-
        Latency: 128
        Interrupt: pin ? routed to IRQ 11
        Region 0: [virtual] I/O ports at 01f0
        Region 1: [virtual] I/O ports at 03f4
        Region 2: [virtual] I/O ports at 0170
        Region 3: [virtual] I/O ports at 0374
        Region 4: I/O ports at b400 [size=16]
    
    00:03.0 USB Controller: Silicon Integrated Systems [SiS] 7001 (rev 0f) (prog-if 10 
[OHCI])
        Subsystem: Asustek Computer, Inc.: Unknown device 807a
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- 
SERR- FastB2B-
        Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- 
<MAbort- >SERR- <PERR-
        Latency: 32 (20000ns max), cache line size 08
        Interrupt: pin A routed to IRQ 9
        Region 0: Memory at f6000000 (32-bit, non-prefetchable) [size=4K]
    
    00:03.1 USB Controller: Silicon Integrated Systems [SiS] 7001 (rev 0f) (prog-if 10 
[OHCI])
        Subsystem: Asustek Computer, Inc.: Unknown device 807a
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- 
SERR- FastB2B-
        Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- 
<MAbort- >SERR- <PERR-
        Latency: 32 (20000ns max), cache line size 08
        Interrupt: pin B routed to IRQ 9
        Region 0: Memory at f5800000 (32-bit, non-prefetchable) [size=4K]
    
    00:03.2 USB Controller: Silicon Integrated Systems [SiS] 7001 (rev 0f) (prog-if 10 
[OHCI])
        Subsystem: Asustek Computer, Inc.: Unknown device 807a
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- 
SERR- FastB2B-
        Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- 
<MAbort- >SERR- <PERR-
        Latency: 32 (20000ns max), cache line size 08
        Interrupt: pin C routed to IRQ 9
        Region 0: Memory at f5000000 (32-bit, non-prefetchable) [size=4K]
    
    00:03.3 USB Controller: Silicon Integrated Systems [SiS]: Unknown device 7002 
(prog-if 20 [EHCI])
        Subsystem: Asustek Computer, Inc.: Unknown device 807a
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- 
SERR- FastB2B-
        Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- 
<MAbort- >SERR- <PERR-
        Latency: 32 (20000ns max), cache line size 08
        Interrupt: pin D routed to IRQ 9
        Region 0: Memory at f4800000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: [50] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA 
PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
    
    00:04.0 Ethernet controller: Silicon Integrated Systems [SiS] SiS900 10/100 
Ethernet (rev 91)
        Subsystem: Asustek Computer, Inc.: Unknown device 80a7
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- 
SERR- FastB2B-
        Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- 
<MAbort- >SERR- <PERR-
        Latency: 32 (13000ns min, 2750ns max)
        Interrupt: pin A routed to IRQ 5
        Region 0: I/O ports at 9800 [size=256]
        Region 1: Memory at f4000000 (32-bit, non-prefetchable) [size=4K]
        Expansion ROM at fcec0000 [disabled] [size=128K]
        Capabilities: [40] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA 
PME(D0+,D1+,D2+,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
    
    00:05.0 Multimedia audio controller: C-Media Electronics Inc CM8738 (rev 10)
        Subsystem: Asustek Computer, Inc. CMI8738 6ch-MX
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ 
SERR- FastB2B-
        Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- 
<MAbort- >SERR- <PERR-
        Latency: 32 (500ns min, 6000ns max)
        Interrupt: pin A routed to IRQ 10
        Region 0: I/O ports at 9400 [size=256]
        Capabilities: [c0] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA 
PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
    
    00:0d.0 Ethernet controller: Digital Equipment Corporation DECchip 21140 
[FasterNet] (rev 20)
        Subsystem: Digital Equipment Corporation: Unknown device 500a
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- 
SERR- FastB2B-
        Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- 
<MAbort- >SERR- <PERR-
        Latency: 32 (5000ns min, 10000ns max)
        Interrupt: pin A routed to IRQ 10
        Region 0: I/O ports at 9000 [size=128]
        Region 1: Memory at f3800000 (32-bit, non-prefetchable) [size=128]
        Expansion ROM at <unassigned> [disabled] [size=256K]
    
    01:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA G100 [Productiva] AGP 
(rev 01) (prog-if 00 [VGA])
        Subsystem: Matrox Graphics, Inc. MGA-G100 Productiva AGP
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ 
SERR- FastB2B-
        Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- 
<MAbort- >SERR- <PERR-
        Latency: 64
        Interrupt: pin A routed to IRQ 11
        Region 0: Memory at fd000000 (32-bit, prefetchable) [size=16M]
        Region 1: Memory at f7800000 (32-bit, non-prefetchable) [size=16K]
        Region 2: Memory at f7000000 (32-bit, non-prefetchable) [size=8M]
        Expansion ROM at fcff0000 [disabled] [size=64K]
        Capabilities: [dc] Power Management version 1
                Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA 
PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [f0] AGP version 1.0
                Status: RQ=1 SBA+ 64bit- FW- Rate=x1
                Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none>
    
    -- 
    John Kodis                                    Goddard Space Flight Center
    [EMAIL PROTECTED]                      Greenbelt, Maryland, USA
    Phone: 301-286-7376                                     Fax: 301-286-1771
    
    
    
    -- 
    Psyche-list mailing list
    [EMAIL PROTECTED]
    https://listman.redhat.com/mailman/listinfo/psyche-list
    
-- 
====================================
"If you get to thinkin' you're a
person of some influence, try
orderin' someone else's dog around."
--Cowboy Wisdom




Reply via email to