Slau,

As I mentioned I actually had to do the "I" key while at the splash screen
to re-init the i/o devices. I first tried everything you mentioned and it
still didn't work so after a call to tech support that is what they told me
to do.
As I understood it if you installed the driver before starting PT for the
first time it usually worked. Otherwise, you had to add the other step.

Best,
J. R.

-----Original Message-----
From: [email protected] [mailto:[email protected]] On Behalf
Of Slau Halatyn
Sent: Monday, August 01, 2011 1:14 PM
To: [email protected]
Subject: Re: Problems with PT 9 and MBox II

Hi Abdul,

You need to install the driver for the MBox. Before Avid opened up Pro Tools
to different interfaces, it was all very automatic but now one needs to
install the proper driver/drivers for the corresponding interface. In
version 8, you had it all set up automatically but in version 9 you have to
take that extra step.

The reason you're getting the signal out of your laptop is because, if an
interface isn't detected (because of a missing driver), Pro Tools will
automatically create an aggregate device which includes core Audio devices
like your built-in microphone, line input and built-in speakers.

Once you've installed the MBox driver, you'll probably have to go into the
Playback engine setup window and select the MBox as the audio engine. Pro
tools will automatically save your settings and it should just work. If, for
some reason you still don't get anything after making this change, just
restart your computer and it should work fine.

HTH,

Slau


Reply via email to