Diego, thanks for the input.  I do not have the capacity to do that kind of 
troubleshooting, mainly because I do not have a second mic or set of xlr 
cables.  However, I am off to my audio equipment reseller and as the mic and 
box are under guarantee, I'm sure we can come to a diagnosis and/or resolution 
of the problem.

I will keep you guys updated.

A
On 3 Aug 2011, at 09:03, Chiapello Diego wrote:

> Hi Abdul,
> 
> this problem could be many things: first of all I would try to change
> the Mic, using a dinamic one, with the same cable, and let's see if
> pops, static/hiss can be heared.
> Second, I would try to change the cable using th same condenser Mic
> that makes you unhappy.
> Doing this you can establish if it is a Phantom power problemor a
> preamp problem.
> You should do some trouble shooting.
> 
> Let's us know about.
> 
> Have a nice day.
> 
> Diego.
> 
> 2011/8/3, Abdul D Kamara <[email protected]>:
>> HI Kevin,
>> So I have been poking around the search engines for an answer to the
>> problem, to no avail.
>> Most who have reported the same problem, rule out the Mic, or at least that
>> of the same make as mine, which seems to corroborate your hypothesis.
>> A
>> 
>> On 2 Aug 2011, at 23:38, Kevin Reeves wrote:
>> 
>>> Actually, this is a problem with something on the digital level. I have
>>> seen this happen on several systems, and don't know what might be causing
>>> it. On Aug 2, 2011, at 4:18 PM, Frank Carmickle wrote:
>>> 
>>>> Hello
>>>> 
>>>> What mic? We need more info.
>>>> 
>>>> 
>>>> --FC
>>>> 
>>>> Sent from my iPhone
>>>> 
>>>> On Aug 2, 2011, at 16:12, Abdul D Kamara <[email protected]>
>>>> wrote:
>>>> 
>>>>> Hello Slau and others,
>>>>> 
>>>>> First, many thanks for your guidance on the installation of my MBox 2
>>>>> drivers.
>>>>> 
>>>>> I would like to post on another problem...
>>>>> 
>>>>> As indicated in the subject line, I hear hiss and/or static through my
>>>>> Mbox 2.  I cannot determine if it is an issue with the MIc, but
>>>>> certainly the hiss/static and occasional pops invariably occur when the
>>>>> Mic is connected and powered, which (by the way) connects via XLR.
>>>>> 
>>>>> I have come across others on the Avid Forums dealing with the same
>>>>> issue, but someone has yet to post an answer.
>>>>> 
>>>>> Any clue?
>>>>> 
>>>>> A
>>> 
>> 
>> 

Reply via email to