Hi Michael,

Use the "Identify Beat" option. I think it's under the MIDI menu. This brings 
up a dialog where you can enter the bar value.

First thing you need to do is identify the first beat of the song and label 
that as bar 1, beat one. If the song has a pickup rather than starting on bar 
1, beat 1, navigate to that point, use the Identify Beat command and enter the 
correct bar/beat value. If the drummer is fairly consistent, you can get away 
with identifying the bar/beat every 8 or 16 bars or so. If you do that for each 
section of the song, you should be in good shape.

If you screw up, you can undo the previous beat identification but there's no 
way to reliably tell whether you've done it for a random location because that 
scroll area is not currently accessible. In other words, give yourself plenty 
of time and focus carefully on the process so you're aware of which bar you're 
on.

Hope that helps.

Slau

On Dec 4, 2012, at 9:54 AM, Michael Kuhlmann wrote:

> Hi to the list,
> 
> i'M currently working in a session that was recorded without a click. So the 
> musicians could't be absolutely exact concerning the tempo. Setting the tempo 
> in the event/menues to a constant BPM doesn't work correctly, because the 
> music gets a little faster or slower within the song. Is there an  accessible 
> way to make the session tempo and the click track follow the tempo the 
> musicians are playing?
> 
> Thank you very much in advance and best regards
> 
> Michael

Reply via email to