Sorry about the subject guys! Suppose I should keep better watch on siri before I let her send things! Slau, thanks for the answer, I'm going to try it this moment!
On 4/16/13, Slau Halatyn <[email protected]> wrote: > Hi Matt, > > I'm going to assume you're not using a control surface but, for shits and > giggles, I'll mention that, with a control surface,the first step is super > easy. You need to select the range from just before the punch-in to just > after the punch-in. With a control surface, scrub backwards just a bit, hold > down the Shift key and scrub forward, past the punch-in point. If you don't > have a control surface, you'll need to locate the insertion point before the > punch-in by either typing the number into the Start field and doing the same > for the End field. Regardless of how you achieve it, you'll need a selection > range that spans from before to after the punch-in point. The range should > be at least 10 milliseconds and probably no more than 100 milliseconds. Once > the selection is made, the default crossfade will probably work fine. > depending on whether you have the Complete Production Toolkit, you might be > able to simply press Control-f to create the crossfade. Whether you have the > CPT or not, pressing Command-f will bring up the Fades dialog and you can > just press Return for the default crossfade. > > HTH, > > Slau > > On Apr 16, 2013, at 8:31 AM, Matt Diemert wrote: > >> Can anyone offer any tips or workflows for cross fading in an audio track? >> I have a punch spot in one of my tracks it has just a slight popping it. I >> would like to Crossfade here to ensure that the pop is covered up. >> >> Sent from my iPhone >> >> On Apr 6, 2013, at 9:32 AM, Slau Halatyn <[email protected]> wrote: >> >>> Hi John, >>> >>> There are two aspects to your question: one is the matter of ordering >>> input sources to be sequential from a given track and the other is the >>> issue of track arming. >>> >>> For input source ordering, on the first input source for which you want >>> to start the ascending order of inputs, with the VoiceOver cursor focused >>> on the source pop-up menu, route the mouse pointer to the VoiceOver >>> cursor with Control-Option-Command-f5. Then, while holding down the >>> Option and Command modifiers, press either a physical mouse button or a >>> track pad button. The menu will pop up. Use standard navigation methods >>> to select the channel you want that track to be assigned to. The >>> subsequent tracks will be assigned in ascending order of input channels. >>> >>> The second part can be done in several ways. The long way is to interact >>> with each track, navigate to the record enable button and press it. It's >>> a bit shorter to use the Item Chooser to bring up a list, type r e c and >>> the list will narrow down to record buttons only. Use the arrow keys to >>> go down the list, press Return and click on the button, repeating it for >>> 10 tracks. A faster way would be to use Control-Shift-semicolon to extend >>> the track selection down or across from track 6 through 16 and then press >>> Control-r to record enable the selected tracks. The fastest way is to use >>> a control surface's dedicated record buttons. >>> >>> Hope that helps, >>> >>> Slau >>> >>> On Apr 5, 2013, at 8:07 PM, John Boral wrote: >>> >>>> If a sighted person had 24 tracks and wanted to record on the first ten >>>> tracks starting with input #6 going through to input #16 in order, they >>>> would hit the command and option keys together while clicking the mouse >>>> on the input field of the first track and start with #6. I can't figure >>>> out how to do this either with or without a mouse. >>>> >>>> -- >>>> You received this message because you are subscribed to the Google >>>> Groups "Pro Tools Accessibility" group. >>>> To unsubscribe from this group and stop receiving emails from it, send >>>> an email to [email protected]. >>>> For more options, visit https://groups.google.com/groups/opt_out. >>>> >>>> >>> >>> >>> -- >>> You received this message because you are subscribed to the Google Groups >>> "Pro Tools Accessibility" group. >>> To unsubscribe from this group and stop receiving emails from it, send an >>> email to [email protected]. >>> For more options, visit https://groups.google.com/groups/opt_out. >>> >>> >> >> >> -- >> You received this message because you are subscribed to the Google Groups >> "Pro Tools Accessibility" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> For more options, visit https://groups.google.com/groups/opt_out. >> >> > > -- > You received this message because you are subscribed to the Google Groups > "Pro Tools Accessibility" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/groups/opt_out. > -- Warm Regards: Matt Diemert 330-980-0046 -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
