Try the following, Under setup, down arrow to I/o and press enter. On the input tab, command 1 will get you there, VoiceOver right arrow until you hear default button, and press VoiceOver space. You can do the same on the output tab as well, which you can move to by pressing command 2. Follow the same steps, and then press ok. On my Mavericks system, with my scarlet 18i20, I had to close PT at this point, and reopen for the changes to take affect. Hope This helps.
On 6/27/14, Steve Sparrow <[email protected]> wrote: > Hi guys. well i've done it. I now have pro tools 11 installed on my mac. > I have a slight issue with the interface. I am using a motu 896 interface. I > have selected the motu in the playback engine > Now. when i add an audio track and interact with it, the input tells me no > input, when i v o space on this and go down to interface and collect this it > gives me no options in the interface and takes me back to no input. The > output has 2 or 3 options, but not the usual things like motu ins and outs > that you would normally find in there. sounds to me like the motu is not set > up properly with pro tools. > Is there something i need to do to get this working. > I have the latest drivers for the motu installed on the mac. > Cheers Steve > > -- > You received this message because you are subscribed to the Google Groups > "Pro Tools Accessibility" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. > -- Warm Regards: Matt Diemert 330-980-0046 -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
