Hi Krister, First, to learn which is the plus key, get into Keyboard Help mode with Control-Option-k. Press any key on the keyboard to hear its name. This will help identify keys on unknown keyboards. Press Escape to stop keyboard help.
You need an insertion point to be able to nudge because, by definition, the shortcut is nudging the insertion point. Make sure you have linked the edit selection and track selection within the menus. The plus or minus key will nudge the insertion point by the nudge value. If you want to use the defaults for nudge value, simply navigate to the Grid/Nudge cluster and click and select a value from the pop-up menu. You can cycle up and down through the default values with Command-Option-plus or minus. Be aware that there's a keyboard shortcut conflict if you're using screen magnification. You can also nudge regions with plus or minus by the nudge value when regions are selected. Be aware that, if you select a region while "insertion follows playback" is enabled and you press the space bar to confirm your selection, you will lose the selection because the insertion will immediately start following the playback. 99% of the time I do not have the insertion following playback. Some people like the behavior of the insertion following playback so that, when the transport stops, the playback continues from that spot. Whenever the transport is engaged and you're about to stop playback and you know you want to start again from there, simply press the down arrow once before stopping the transport and the Start field will populate with the counter value at the time of the down arrow press. One last thing, in order for the numeric entry and nudging from the numeric key pad to work, the Edit window needs to be open. It doesn't have to be the frontmost window but it does at least have to be open. Hope that helps, Slau On Oct 5, 2014, at 9:18 AM, Krister Ekstrom <[email protected]> wrote: > Hello again. > Ok, so i listen to the Protools with speech tutorial and they're talking > about making markers, so i think hmm, that sounds easy enough let's try. I go > into pro tools and try to precition edit to a point where i can put a first > marker down and guess what? i can't nudge a single tick. Pressing plus or > minus on the numeric key pad does nothing regardless of which mode i'm in and > pressing minus or plus on the big keyboard yealds just the same results or > non-results as it were. > There's a check box in the edit windows cursor cluster called "insertion > follows playback", i uncheck that and lo and behold, the minus key works but > not the plus key. This means that Protools doesn't actually want the > character "+" but rather the position the plus key is at, only thing is that > i don't know where the plus key is located on an American or english > keyboard. The scandinavian keyboards have a couple more keys on them for our > special characters which means that the layout is somewhat different, so on > our keyboards the plus key is to the right of the zero key but i wonder if it > is the same on english/american keyboards or if the plus key is located > elsewhere or if i'm doing anything else wrong? > I also wonder if it is possible to nudge the cursor from the Digi003? The > manual i thought at least wasn't very specific on this. > Thanks for any help. > /Krister > > -- > You received this message because you are subscribed to the Google Groups > "Pro Tools Accessibility" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
