Functionally there is not a whole lot different between the two IMO. One thing I can think of off the top is that from what I remember the Project doesn't have a scrub/jog wheel and the 003 has 2 headphone outs both with independent volume knobs. I think that the 003 has a better set of converters and preamps, but it may not even be noticeable in the bigger picture. One other thing, some people like the build quality of the 003 much better and some extremely dislike the knobs on the Project. If you can find them for the same price I would go with the 003, but that seems unlikely. HTH
-----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Krister Ekstrom Sent: Wednesday, January 14, 2015 1:49 AM To: [email protected] Subject: Difference between two control surfaces Hi all you clever people out there! I’m just wondering what the difference might be between the M-audio Project mix and the Digi003 in terms of what you can do with them in Protools? If someone has used both of these units it would be interesting to hear what the difference might be and if one is easier or more limited than the other. /Krister -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
