Hi John, You can adjust the parameter in one cent increments. In addition, you can adjust in percentages, note values, etc. In fact, there are dozens of editable parameters between the pitch and time domains. Also, there are options for resetting parameters back to defaults.
HTH, Slau On Jan 20, 2015, at 7:54 AM, John Gunn <[email protected]> wrote: > Mike, > > Thanks for the info but to be sure, can one move in shorter increments in > cents? > > Meaning I want to move smaller then semi tones 50 cents. > > Take care, John > > >> On Jan 19, 2015, at 4:25 PM, Mike Lockett <[email protected]> wrote: >> >> Hey John, >> Its in PT10 where you have to use short cut keys to move semitones. >> ; >> Theres know shortcut to move cents. >> But in PT11 the parameters can be control by V-O. >> When the plug-in window is open, interact with plug-in view, >> go to output percent view interact with it, >> V-O up or down to change the cents. >> Hope this helps. >> >> On Jan 19, 2015, at 6:50 AM, John Gunn <[email protected]> wrote: >> >>> Mike, >>> >>> Can youy also instead of semi tones change in cents value as well? >>> >>> John >>> >>> >>>> On Jan 15, 2015, at 2:43 PM, Mike Lockett <[email protected]> wrote: >>>> >>>> Hi guys, just wanted to tell you about the new “pitch ’n Time pro V3.” >>>> It works with Pro tools 10.3.5 and higher. >>>> It's only accessible with 11.1 and higher with voice over. >>>> Although in ten three there are some short cut keys that you can use for >>>> Example >>>> >>>> To change pitch one semitone use the control up or down arrow depending on >>>> the direction you need to go. >>>> For time contraction or expansion use control and left or >>>> rright arrow. thesecommands work any where the plug-in window is open >>>> >>>> Pitch ’n time is the industry go to plug for TCE and key >>>> Manipulation >>>> The company is Serato. >>>> In 11 when the plug-in window is open, >>>> Interact with the >>>> plug-in parameter and all of it is accessible… >>>> >>>> -- >>>> You received this message because you are subscribed to the Google Groups >>>> "Pro Tools Accessibility" group. >>>> To unsubscribe from this group and stop receiving emails from it, send an >>>> email to [email protected]. >>>> For more options, visit https://groups.google.com/d/optout. >>>> >>> >>> -- >>> You received this message because you are subscribed to the Google Groups >>> "Pro Tools Accessibility" group. >>> To unsubscribe from this group and stop receiving emails from it, send an >>> email to [email protected]. >>> For more options, visit https://groups.google.com/d/optout. >> >> -- >> You received this message because you are subscribed to the Google Groups >> "Pro Tools Accessibility" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> For more options, visit https://groups.google.com/d/optout. >> > > -- > You received this message because you are subscribed to the Google Groups > "Pro Tools Accessibility" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
