Hi, It seams, that you have to reconfigure your IO Settings. Go to Setup > IO and do the following: 1. Select the input tab 2. Press Command + a 3. Navigate to the delete button and click it. 4. Navigate to the default button and click it. 5. Do the same on the output tab and on the bus tab.
Hope that helps. Stefan > Am 25.04.2015 um 03:16 schrieb Ricky Prevatte <[email protected]>: > > Well with ProTools 11 three I now have no play back after upgrading to > Yosemite. I thought it might be my mixer that I was using for playback so I > switched to an internal speakers, ProTools aggregate and nothing is > happening. I can't see anything muted I have tried lots of projects any > suggestions will be helpful. > > Ricky Prevatte LMBT1154 > > -- > You received this message because you are subscribed to the Google Groups > "Pro Tools Accessibility" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
