Hi Dionipher, USB runs or cable length are the same. You can only run the cable so far. Do a google search for the apogee mic manual. Just get the model # and bang it will most likely be in the first 5 hits. HTH Chuck
On Jul 2, 2015, at 5:57 PM, Dionipher Presas Herrera wrote: > what do you mean by usb runs? im sorry but i lost my apogee manual. my mom > can't find it. >> On 02 Jul 2015, at 10:50 pm, CHUCK REICHEL <[email protected]> >> wrote: >> >> Hi Dionipher, >> They make a usb extension cable. >> There are length restrictions for usb runs, unless you spend lots of bucks! >> :) >> I'm sure your apogee mic manual will cover this? >> If not apogee site might be helpful! >> HTH >> Chuck >> >> >> On Jul 2, 2015, at 4:07 PM, Dionipher Presas Herrera wrote: >> >>> how do you extend the usb cable for the mic? i do have the apogee mic, it >>> have only 1 meter usb cable to connect on my computer. i would like somehow >>> to record a video and a live audio with it. can i do that? >>>> On 02 Jul 2015, at 9:25 pm, CHUCK REICHEL >>>> <[email protected]> wrote: >>>> >>>> Hi Andy, >>>> Heres a tip for mic stands I've been using for years! :) >>>> Lifting weights fit directly on the poll and prevent knocking them over >>>> with out trying. >>>> 1 ten pounder sits nicely on the base after you install it. >>>> I use a combination of weight lifter weights & 10 pound leg weights "ankle >>>> weights" for booms. >>>> Although i have several $500.00 atlas booms on wheels, the weights work >>>> very good for all the other stands. >>>> Also to save floor space, for my drum kit I have the over heads & tom mics >>>> acoustically suspended from the ceiling to take the always compromising >>>> mic-ing and weaving stands in to a drum kit. :) out of the picture! >>>> >>>> HTH >>>> Chuck >>>> >>>> >>>> CHUCK REICHEL >>>> [email protected] >>>> www.SoundPictureRecording.com >>>> 954-742-0019 >>>> Isaiah 26 : 3 >>>> Thou wilt keep him in perfect peace, whose mind is stayed on thee: >>>> because he trusteth in thee. >>>> >>>> In GOD I Trust >>>> >>>> On Jul 2, 2015, at 2:31 PM, Velcro Lewis wrote: >>>> >>>>> Hello everyone! >>>>> My name is Andy and this is my 1st topic post. >>>>> >>>>> I work at a small studio and share with another engineer. >>>>> He is very patient and understanding when I make any changes to the >>>>> layout of the outboard gear, stickers/labels on the preamps and mixer, >>>>> mic cabinet, storage of amps and instruments etc. I have major issues >>>>> with light sensitivity and choose to block the windows when I work during >>>>> the day. Asides from that I haven't really modified anything else. >>>>> >>>>> I am working on having a custom meter bridge built for the mixing >>>>> console, wrapping the mic cables in colored tape to identify length of >>>>> the cable, etc. I'm also planing to paint or tape the mic stands so I can >>>>> see them and not knock them over or hurt myself while setting them up. >>>>> These are all basic mods but they took me awhile to realize it (I don't >>>>> do anything like this around the house). >>>>> I don't use voice over and seldom use a control surface.These are just >>>>> choices I have made for the time being. >>>>> >>>>> Anyway, I would like to hear about whatever physical modifications, >>>>> markers, identifications you have made to your studio workspace. I'm >>>>> betting there are some really basic ideas that I have overlooked. >>>>> Thanks for sharing! >>>>> >>>>> Also, since I am new and would like to get acquainted with this group, if >>>>> you can leave a link to your site I would appreciate it. >>>>> >>>>> Anfdy >>>>> www.velcrolewisgroup.com >>>>> www.mrandyslater.tumblr.com >>>>> www.facebook.com/froggmountain >>>>> >>>>> >>>>> -- >>>>> You received this message because you are subscribed to the Google Groups >>>>> "Pro Tools Accessibility" group. >>>>> To unsubscribe from this group and stop receiving emails from it, send an >>>>> email to [email protected]. >>>>> For more options, visit https://groups.google.com/d/optout. >>>> >>>> >>>> -- >>>> You received this message because you are subscribed to the Google Groups >>>> "Pro Tools Accessibility" group. >>>> To unsubscribe from this group and stop receiving emails from it, send an >>>> email to [email protected]. >>>> For more options, visit https://groups.google.com/d/optout. >>> >>> >>> -- >>> You received this message because you are subscribed to the Google Groups >>> "Pro Tools Accessibility" group. >>> To unsubscribe from this group and stop receiving emails from it, send an >>> email to [email protected]. >>> For more options, visit https://groups.google.com/d/optout. >> >> >> -- >> You received this message because you are subscribed to the Google Groups >> "Pro Tools Accessibility" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> For more options, visit https://groups.google.com/d/optout. > > > -- > You received this message because you are subscribed to the Google Groups > "Pro Tools Accessibility" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
