No, I did indeed mean in the mix window. I don't even have a control surface, and, beside, these were all tracked as audio, not midi.
Isn't that just totally weird? It's ok, as really, no further work needs to be done on the session, but I do! wonder what on earth I did. All other sessions look fine. Don't worry about calling. Your'e a busy man. It's quite OK. I just figured you might would have some idea. I know you've called people like Brian Howerton before when something went awri like this, so I just figued maybe you could help me out better via voice. It's all good, my friend. No sweat. I guess it's just one a those mistories of life. I do not doubt you at all with what you're saying. I just don't seem them. Let me just make this very clear. I'm sure you understand already, but, when I say they're not showing, what I mean is, in both the mix and edit window, I see them fine in the track list table, which is totally visible. What I don't see are the physical track strips like where you'd interact to say, add inserts, or sends, or panning, etc. The track list table's fine. It's the track strips themselves that I don't see. Anyway, it's all good. I very very very much appreciate you at least having a quick look at it. Chris. ----- Original Message ----- From: Slau Halatyn To: [email protected] Sent: Wednesday, November 11, 2015 3:01 PM Subject: Re: Tracks not showing. What the heck did I do! I can't call. Your tracks are showing in the Mix and edit windows. I f you meant to say they're not showing up on your control surface, go to Setups>Preferences>MIDI Controllers and make sure your surface is showing in the pop-up menus. Slau On Nov 11, 2015, at 2:22 PM, Christopher-Mark Gilland <[email protected]> wrote: Slau, I just tweeted you my number. If you have a second, can you maybe call me and try helping me figure this out? Even after sending me that ptx file, I still! cannot see the tracks in my session! This is just weird! This is my work number, so I don't mind publishing it here, if it accidentally makes it to the list. If you can't call, anyone on this list is welcome to, if you think you could help. 704-256-8010 Extension 401. Chris. ----- Original Message ----- From: Slau Halatyn To: [email protected] Sent: Wednesday, November 11, 2015 1:33 PM Subject: Re: Tracks not showing. What the heck did I do! Chris, I attached the file to the email so you should be able to save the attachment. Just in case, here's a DropBox link: https://dl.dropboxusercontent.com/u/3016244/BBTH2.ptx Slau On Nov 11, 2015, at 8:46 AM, Christopher-Mark Gilland <[email protected]> wrote: Slau, that is the oddest thing. For one, if you tried sending me back another zip of the session with the issue fixed, I've not seemed to be able to find the mail with the link. That however said, I looked in my session I already have that is screwed up and found the show/hide track list button, but hitting it seems to only be hiding/showing the track list table, not the actual tracks themselves. I'm totally at a loss. Is there anything else to try? Chris. ----- Original Message ----- From: Slau Halatyn To: [email protected] Sent: Wednesday, November 11, 2015 8:25 AM Subject: Re: Tracks not showing. What the heck did I do! I don't know what you did and I can't explain it. Your tracks were certainly visible but what seemed to be hidden was your tracks list itself. There's a toggle button for that toward the bottom of the window. Use this session file: -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout. ---------------------------------------------------------------------- Here's a tip: if you don't specifically need for people to download hundreds of megabytes and you only want them to see what's going on in a session, just attach the session itself like I just did. Slau On Nov 11, 2015, at 6:09 AM, Christopher-Mark Gilland <[email protected]> wrote: Guys, This is just totally wicked weird! I have a session with about 9 tracks all total. I recorded this session in Yosemite 10.10.5, with ProTools 12.2. When Slau wrote and said that El Capitan now was supported, I upgraded. So far, all looks good, but this one session has done something really weird. I see my track list table, but none of my tracks are showing in the mix window. I made sure all were selected in the table, then did a VO+Shift+M and made sure that they were not hidden. They're not. Nor have they been made inactive, from what I can tell. I had my mom look. OK, granted, she wouldn't know a beep from a honk as far as audio goes, let alone how to look at a recording DAW of any sort, so I'm not sure how much she was able to really correctly tell, but she said it looked to her at least like all 9 of my tracks visually were on the screen, and were not shunk, nor were stretched too tall, too wide, or too short/long. She said each strip looked correct. I brought up another session that isn't seeming to have this problem, and showed her so she could compare. She said both sessions looked very close to the same. She tried zooming in and out with the mouse, but it did no good either way. The thing that makes this so strange is, I've changed absolutely nothing! in ProTools since I updated from 12.2, to 12.3. And I do mean, nothing! Nada! Further, I've not touched this session since I bounced it out the other night when all looked flawless. So, I'm at a total total loss! Below, I have pasted a Dropbox link to a zip file of the session. I'd love! it if one of you could have a look at this, and try to figure out what in the hell! I've done! This is just total! craziness! Not to mention, completely bizarre! Anyway, here's the link. Beware that I did use two plugins in this thing which are nonstock plugs. I used Auto-Tune a bit, as well as the Waves CLA2A plug, so if you don't have licenses to these, you may get a few errors you have to dismiss, but it shouldn't be anything major. Chris. -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout. ---------------------------------------------------------------------- I don't know what you did and I can't explain it. Your tracks were certainly visible but what seemed to be hidden was your tracks list itself. There's a toggle button for that toward the bottom of the window. Use this session file: Here's a tip: if you don't specifically need for people to download hundreds of megabytes and you only want them to see what's going on in a session, just attach the session itself like I just did. Slau On Nov 11, 2015, at 6:09 AM, Christopher-Mark Gilland <[email protected]> wrote: > Guys, > > This is just totally wicked weird! I have a session with about 9 tracks all total. I recorded this session in Yosemite 10.10.5, with ProTools 12.2. > > When Slau wrote and said that El Capitan now was supported, I upgraded. So far, all looks good, but this one session has done something really weird. > > I see my track list table, but none of my tracks are showing in the mix window. I made sure all were selected in the table, then did a VO+Shift+M and made sure that they were not hidden. They're not. Nor have they been made inactive, from what I can tell. I had my mom look. OK, granted, she wouldn't know a beep from a honk as far as audio goes, let alone how to look at a recording DAW of any sort, so I'm not sure how much she was able to really correctly tell, but she said it looked to her at least like all 9 of my tracks visually were on the screen, and were not shunk, nor were stretched too tall, too wide, or too short/long. She said each strip looked correct. I brought up another session that isn't seeming to have this problem, and showed her so she could compare. She said both sessions looked very close to the same. She tried zooming in and out with the mouse, but it did no good either way. > > The thing that makes this so strange is, I've changed absolutely nothing! in ProTools since I updated from 12.2, to 12.3. And I do mean, nothing! Nada! Further, I've not touched this session since I bounced it out the other night when all looked flawless. So, I'm at a total total loss! > > Below, I have pasted a Dropbox link to a zip file of the session. I'd love! it if one of you could have a look at this, and try to figure out what in the hell! I've done! This is just total! craziness! Not to mention, completely bizarre! > > Anyway, here's the link. Beware that I did use two plugins in this thing which are nonstock plugs. I used Auto-Tune a bit, as well as the Waves CLA2A plug, so if you don't have licenses to these, you may get a few errors you have to dismiss, but it shouldn't be anything major. > > Chris. > > -- > You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. > To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. > For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
