It's not usually recommended to use the same interface as your mac audio interface and your protools interface. In system preferences > sound >input and outputs you want to leave those set to your defaults or something else. In pro tools you will need to select the pro tools interface under playback device. i believe this is under the set up menu.
On 11/20/15, Vaughn Brown <[email protected]> wrote: > OK, > > You may find the solution under the Mac's sounds, output and input. > See if your Mac can see your this device. Set it as default. Then look > in Protools under set up hardware. You may have to get Protools to > "see" the device, too. > > I hope this helps. > Vaughn > > On 11/19/15, Slau Halatyn <[email protected]> wrote: >> Hi Darwin, >> >> Just saw that you posted this message here before we had communicated >> off-list. Another approach you can take to eliminate variables and make >> sure >> you're getting signal to begin with is to create an aux track and >> instantiate a signal generator plug-in. The generator will automatically >> come up generating a tone. That way, you're sure to have a signal coming >> through and work on getting your monitor out confirmed. Also, BTW, make >> sure >> your playback engine has the 003 set to be the output. After that's >> sorted >> out, you'll probably want to go through the "Getting Started" pdf manual >> to >> get oriented. Keep us posted on your progress. >> >> Slau >> >> On Nov 19, 2015, at 10:37 PM, Darwin May <[email protected]> wrote: >> >>> Hello, guys, I am a person who is new at pro tools, I got a 003 consul >>> and >>> I am trying to get sound through it to the ProTools software. At the >>> current moment I am running ProTools 11.3, I am waiting on my order of >>> the >>> official ProTools to come in, so I am using the demo version as of right >>> now. The situation is as follows, I am using a 003 surface controller I >>> have two cables running from powered monitor speakers to the monitor >>> jacks >>> on the back, then I have my keyboard running into channel 1, I have all >>> drivers and software installed on my MacBook pro, such as the 003 family >>> driver and of course ProTools. I have my channel 1 going to input one >>> mono >>> and on the output part of the track I have set Output one, sorry if >>> sounds >>> silly. I am new with ProTools I have always use logic in the past. Any >>> help would be greatly appreciated. >>> >>> -- >>> You received this message because you are subscribed to the Google >>> Groups >>> "Pro Tools Accessibility" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an >>> email to [email protected]. >>> For more options, visit https://groups.google.com/d/optout. >> >> -- >> You received this message because you are subscribed to the Google Groups >> "Pro Tools Accessibility" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> For more options, visit https://groups.google.com/d/optout. >> > > > -- > Vaughn Brown > Berklee College of Music Graduate, Bachelor in Music, Drummer, educator > 504-202-8492 > http://www.vaughnbrown.net > > -- > You received this message because you are subscribed to the Google Groups > "Pro Tools Accessibility" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
