Hi Martin, well, right at the outset, I see that your session was saved with a playback engine of HDMI. That means your Pro Tools system is using an HDMI output as the main playback output. You really need to be using either a proper audio interface or, at the very least, your built-in output but even that is really not recommended. Your session plays back fine on my system but, of course, I'm playing it back through an HD interface. Try using a different playback engine under the Settings menu and see if that alleviates the problem. Slau
On Dec 7, 2015, at 11:28 AM, Martin (Punky) Sopart <[email protected]> wrote: > Hi Slau! > > Thanks a lot for your help again. > > After removing the Click II folder the problem still exists with the factory > preset. > > My fault: I never went into the Click II plug-in window before. > > Now I created a new session only with the click track for you. > I saved the session with the "off" "Enable LED" session > > Best! / Martin > > -- > You received this message because you are subscribed to the Google Groups > "Pro Tools Accessibility" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. > <Test4Slau.ptx> -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
