Hi all, I haven’t touched PT in a while due to lack of time, but now I want to get back on track with it and improve my skills and overall knowledge of PT. So, I downloaded and installed PT 12.4 on my Mac, everything seems to work just fine. However, I’ve noticed an odd issue in the Mix window when it comes to reading level meters. I first noticed this when I was recording input from a mic. I armed the mic and checked the level meter, the DB value was changing just as expected. At some point I blew into the microphone in an attempt to make it clip on purpose. I then noticed that the value changed to -15, that’s where it then actually stayed. Even with absolutely no noise on that channel the level stayed at -15. At this point, I decided to press VO space on the level value, at which point it started changing again, up until it stopped once again at around -5DB. I’ve also observed this issue in a PT session, where the level of the master fader would be updated during playback but stop at some point (this doesn’t always happen at the same spot in the recording but at different times). Pressing VO space on it gets it going again for a while, but that would never last longer than a minute or 2. Has anybody else discovered this issue? I was browsing the list archives and discovered that another person had a similar issue, which was caused by a floating window being in the way. However, I made sure to check that there are no floating windows in the way, the „Hide all floating windows“ in the PT menu bar is actually dimmed. So, are there any other known solutions to fix this problem? Many thanks for any help! Best regards, Robin
-- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
