and perhaps for a drive that stores samples, large soft synths, and
sound effect libraries. Sure speeds up opening large projects.
At 03:09 AM 4/28/2016, you wrote:
Let's try that again. Keep in mind though that SSD drives only have
a limited amount of write cycles. That's why I personally still
won't do that. For that reason, SSD drives are great for an OS drive
or operating system as you are not punishing them in the same way as
you do an audio drive.
----------
From: [email protected] [mailto:[email protected]]
On Behalf Of Phil Muir
Sent: 28 April 2016 06:46
To: [email protected]
Subject: Re: my control surface dilemma, a real drag
Keep in mind though that SSD drives only have a limited amount of
write cycles. That's why I personally still won't do that. For
thatreason, SSD drives are great for an OS drive or opperating
system as you are not punnishing them in the same way as you do an audio drive.
On 28 April 2016 06:26:49 BST, Kevin Reeves <[email protected]> wrote:
Just upgrade to an ssd. Pro tools does not require 2 drives. It's
just best practice with spinning drives. I record to my Samsung ssd
with no problems on a 2009 m b p running elcap.
Sent from my iPhone
On Apr 26, 2016, at 8:03 AM, Steve Martin
<<mailto:[email protected]>[email protected]> wrote:
The advantage of removing the DVD drive is so you can have two
internal Hard drives. this can come in handy when traveling as Pro
tools usually requires you to record to an separate HD than your
system drive and that way you have two drives internally and won't
have to bring an external USB or etc drive. Or just to have a
separate OS on each drive.
On Apr 26, 2016, at 6:15 AM, Phil Muir
<<mailto:[email protected]>[email protected]>
wrote:
Gord. You don't need to remove the DVD drive. You may need to
fit a larger hard drive and build a Mac installer. That's easy
enough to do using command line tools. Just use the bootcamp
manager to partition the disk for you. Doing that here with my
Samsung EVO 500GB drive in this mid 2012 15 inch MacBook Pro.
----------
From: <mailto:[email protected]>[email protected]
[<mailto:[email protected]>mailto:<mailto:[email protected]>[email protected]]
On Behalf Of Gordon Kent
Sent: 26 April 2016 02:54
To: <mailto:[email protected]>[email protected]
Subject: Re: my control surface dilemma, a real drag
I might give this serious
fault. My macbook pro is 4 years old now. If I ever get a newer
mac, it will be a tower system, not a laptop. I could care less
about the new features in el capitan. I would rather have pt
working the way it should. Maverick solved some of the
accessibility problems with pro tools not reading certain numeric
values and the like. And apple still hasn't made the midi studio
accessible. If I removed the Dvd drive, I could put in a second
HD and run boot camp to switch between the os's if I wanted to.
Gord
From: <mailto:[email protected]>Ricky Prevatte
Sent: Monday, April 25, 2016 9:40 PM
To: <mailto:[email protected]>[email protected]
Subject: Re: my control surface dilemma, a real drag
I am running ProTools 12 and Mavericks. I had problem with
Yosemite and had to roll back. All of that stuff works well with
the latest version of logic as well on those older operating
systems. I am not going to upgrade myself out of house and home I
have thisDAW Running well I am going to keep it that way. I have a
nice quick hard drive in the old laptop I have my CD drive I have
no interest in a newer Apple Computer.
Ricky Prevatte LMBT1154
On Apr 25, 2016, at 9:32 PM, Gordon Kent
<<mailto:[email protected]>[email protected]> wrote:
But don't I need to be running
el capitan to run pro tools 12? I really liked maverick the
best, but I would think yossemity would be as far back as you could go.
Gord
From: <mailto:[email protected]>Ricky Prevatte
Sent: Monday, April 25, 2016 9:14 PM
To: <mailto:[email protected]>[email protected]
Subject: Re: my control surface dilemma, a real drag
Hi Gordon I believe if you took your laptop in and have it rolled
back to Mavericks or Yosemite your problem would be solved. If
there is an issue that you need the newer update I understand but
it may be cheaper and I know there is no learning curve there. I
use my Presonus studio live for my console. It will not support
El Capitan as well. I just bought a control surface and mackie
MCU pro may not support it as well. I have heard that it did run
with El Capitan.
I am not going to take that chance. But all those surface issues
you mentioned could be solved by abandoning El Capitan.
Ricky Prevatte LMBT1154
On Apr 25, 2016, at 8:57 PM, Gordon Kent
<<mailto:[email protected]>[email protected]> wrote:
It's been quite a while since I've used
pro tools. Back when I was running pt 10 with the older os's
mountain lion etc., I had it working great with my alesis
master control audio interface/control surface. Now alesis is
no longer supporting it with el capitan. I don't think my
m-audio project mix or the behringer bcf2000 will work
either. Are we relegated to having to buy the Avid artist
series surface? Would that be good enough or do we really need
to spring for the s3.
Gord
--
You received this message because you are subscribed to the
Google Groups "Pro Tools Accessibility" group.
To unsubscribe from this group and stop receiving emails from
it, send an email to
<mailto:[email protected]>[email protected].
For more options, visit
<https://groups.google.com/d/optout>https://groups.google.com/d/optout.
--
You received this message because you are subscribed to the
Google Groups "Pro Tools Accessibility" group.
To unsubscribe from this group and stop receiving emails from it,
send an email to
<mailto:[email protected]>[email protected].
For more options, visit
<https://groups.google.com/d/optout>https://groups.google.com/d/optout.
--
You received this message because you are subscribed to the
Google Groups "Pro Tools Accessibility" group.
To unsubscribe from this group and stop receiving emails from it,
send an email to
<mailto:[email protected]>[email protected].
For more options, visit
<https://groups.google.com/d/optout>https://groups.google.com/d/optout.
--
You received this message because you are subscribed to the Google
Groups "Pro Tools Accessibility" group.
To unsubscribe from this group and stop receiving emails from it,
send an email to
<mailto:[email protected]>[email protected].
For more options, visit
<https://groups.google.com/d/optout>https://groups.google.com/d/optout.
--
You received this message because you are subscribed to the Google
Groups "Pro Tools Accessibility" group.
To unsubscribe from this group and stop receiving emails from it,
send an email to
<mailto:[email protected]>[email protected].
For more options, visit
<https://groups.google.com/d/optout>https://groups.google.com/d/optout.
--
You received this message because you are subscribed to the Google
Groups "Pro Tools Accessibility" group.
To unsubscribe from this group and stop receiving emails from it,
send an email to
<mailto:[email protected]>[email protected].
For more options, visit
<https://groups.google.com/d/optout>https://groups.google.com/d/optout.
--
You received this message because you are subscribed to the Google
Groups "Pro Tools Accessibility" group.
To unsubscribe from this group and stop receiving emails from it,
send an email to
<mailto:[email protected]>[email protected].
For more options, visit
<https://groups.google.com/d/optout>https://groups.google.com/d/optout.
--
Regards,
Accessibility Training
Telephone: UK +44-1747-228-459
Mobile: UK +44-7968-136-246
E-mail:
[email protected]
URL:
<http://www.accessibilitytraining.co.uk>http://www.accessibilitytraining.co.uk
--
You received this message because you are subscribed to the Google
Groups "Pro Tools Accessibility" group.
To unsubscribe from this group and stop receiving emails from it,
send an email to
<mailto:[email protected]>[email protected].
For more options, visit
<https://groups.google.com/d/optout>https://groups.google.com/d/optout.
--
You received this message because you are subscribed to the Google
Groups "Pro Tools Accessibility" group.
To unsubscribe from this group and stop receiving emails from it,
send an email to
<mailto:[email protected]>[email protected].
For more options, visit
<https://groups.google.com/d/optout>https://groups.google.com/d/optout.
---
<http://www.shareasale.com/r.cfm?b=635671&u=1109457&m=54749&urllink=&afftrack=>Learn
to meditate and train your brain with Muse, the first lab-grade EEG
biofeedback headband for home use!
--
You received this message because you are subscribed to the Google Groups "Pro Tools
Accessibility" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
For more options, visit https://groups.google.com/d/optout.
