I've been spending some time here and there going through the libraries within Komplete Kontrol just to acquaint myself with the breadth of the offerings. Aside from being overwhelmed, of course, one of my initial concerns was with the automation parameters. At a certain point, I took a look at the available parameters in the Plug-in Automation Enable dialog and was surprised to see that the list contained almost twelve hundred parameters, most with the generic name of "row 758," "row 389," "row 1106," etc. Apart from a few at the top that seemed to pertain to the scale and arpeggiator, I didn't see much clear identification. Well, upon a closer look, I've noticed that, depending on which instrument and preset is loaded, those parameters do indeed change. I'm not sure why it didn't appear this way before but, after loading an percussion instrument, I was able to identify the pattern, feel, intensity, effects, etc. in the parameters list. After having loaded one of the vintage organs, parameters such as the draw bars, percussion, vibrato, rotor, etc. all dynamically changed. To be clear, the parameters do not appear in the plug-in window upon auto-enabling them. The only way to access those parameters is either with the S-series controller or with a control surface. I haven't attempted any automating of parameters yet but will see if I might have a chance over the weekend. Otherwise, I'm on vacation after the weekend and won't be around for a while. Anyway, just throwing that out there.
Slau -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
