Cool, glad that at least we achieve some kind of progress. Ha, Agree, the shift usually means selection, right?! Let's read some more, who knows, maybe we find some trick to jump between locate points. Regards, Rui Vilarinho
----- Original Message ----- From: Gordon Kent To: [email protected] Sent: Tuesday, November 15, 2016 12:10 AM Subject: Re: bcf2000 with PT Thanks for the tips. I tried it on sends and it works. I knew about the arming of tracks, but not selecting. I’m surprised they wouldn’t have just used shift alone with the encoders. II It would be nice to be able to move through locate points. It would be great to be able to control plugins, especially with that flotools implementation. Gord From: Rui Vilarinho Sent: Sunday, November 13, 2016 11:55 PM To: [email protected] Subject: Re: bcf2000 with PT Not tested yet, but it goes anyway some stuff I found about the BCF2000 controller functions. We can adjust track pan values; the "Store" button toggles the encoders between L/R for stereo track panning, while the 4 "Encoder Group" buttons under the screen determine the track send levels. It's possible to adjust with the encoders (Send A, B, C or D). We can record-enable tracks by pressing the corresponding track encoders, and/or select them by holding Shift (the "Edit" button) and pressing the encoders. The Encoder Groups control the send levels of a track. E.g. We set up the reverb sends on Send A of every track, press the first Encoder Group button and the encoders now control the level of Send A, and the LED rings will show the level. If there is no send on a track, the LED's wont light up. We can do this for the first four sends (A-D) of each track by using the 4 Encoder Group buttons. So, yeah, we can push down on the rotary dials, lol! The record enabled is a huge help. Concerning plugin's; Curious that if we open up plugins in pro tools now there is a red box around some of the switches and dials that was not there before started using the controller. That looks like pro tools showing which dials, faders and switches can be controlled by the bcf2000. Well, it goes a diagram that shows the control mapping for the BCF2000 in Baby HUI emulation mode: http://www.behringerdownload.de/BCF2...tion_modes.pdf We can pretty much just use the template above to see the button layout and look at the manual below, for the baby hui controller to see what every single function does in the bcf2000 and how to do it. There is no mention of plugin control in the manual though, too bad... http://www.mackie.com/pdf/BabyHUI_UG.pdf Didnt find stuff concerning moving to locate points. I’m pretty much quoting, bringing the experience of guys with good vision, anyway hope this helps. Let us know how you go, Rui Vilarinho ----- Original Message ----- From: Gordon Kent To: [email protected] Sent: Sunday, November 13, 2016 7:22 PM Subject: Re: bcf2000 with PT The inability to work with plugins is due to a limitation in the baby hui protycol. I want to know how to access aux sends and arm tracks for recording. I would think there would be some sort of channel strip moe that would let you control a number of parameters on a single track or bus. It should also be possible to move to locate points. Gord From: Rui Vilarinho Sent: Sunday, November 13, 2016 1:38 PM To: [email protected] Subject: Re: bcf2000 with PT Hi Gord and Brian, Indeed I use BCF 2000, but I can only confirm the same feedback. Until now I didnt manage to work with it within plugin controls. Yeah, concerning controling stereo panning, perhaps dividing it to two mono tracks?! Take care, Rui Vilarinho ----- Original Message ----- From: Brian Howerton To: [email protected] Sent: Sunday, November 13, 2016 7:19 AM Subject: Re: bcf2000 with PT Would be interested in this as well. Sent from my iPhone On Nov 12, 2016, at 3:30 PM, Gordon Kent <[email protected]> wrote: Is anybody using the behringer bcf2000 with pro tools? I have it working somewhat. The faders, mute and solo buttons work, as well as the transport buttons. Is there any documentation around that explains how to get at other functions. Also, panning really doesn’t work as it should because PT displays two pan controls for tracks and the bcf2000 only seems to access one of them. A search doesn’t seem to yield results for any printed docs, just some youtube videos and such. Gord -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
