Hi Slau: Thanks so much for this, Much abbreciated > On Sep 30, 2017, at 11:35 PM, Slau Halatyn <[email protected]> wrote: > > Hi Ramy, > I'm not sure why you're not seeing a peak value. When you interact with the > track and navigate down toward the lower end of the items, do you see a peak > meter? You're not trying to read a peak meter on a MIDI track, right? This is > a standard audio track? The command does most certainly work but only if you > have followed the setup instructions and stay aware of things like making > sure you don't inadvertently switch to narrow Mix window or some such thing. > BTW, there's no such thing as pause in Pro Tools. You're either playing or > not and either the insertion is following playback or not. Control+n toggles > the behavior and, as mentioned earlier, double-tapping it toggles when you're > using Flo Tools. If the insertion is not following playback, you can use the > down arrow to populate the Start field with the current position while the > transport is engaged. Therefore, when you do press the space bar to stop, > you'll only be a second or two away from where you pressed the down arrow and > when you start playback, it'll be from the point where you pressed the down > arrow. > HTH > >> On Sep 30, 2017, at 1:20 PM, Ramy Moustafa <[email protected]> wrote: >> >> Hi Slau: >> Thanks so much for this, >> all Are working as you told me exactly. how ever, when standing on the track >> that am recording, the P letter doesn’t read the peek meeter, why? >> >>> On Sep 30, 2017, at 4:28 PM, Slau Halatyn <[email protected]> wrote: >>> >>> Ramy, >>> In order for the Inspector to work, VoiceOver needs to be focused on a >>> track in the Mix window and that does not mean focused on a track in the >>> Track List table. You need to navigate with VoiceOver across the shown >>> tracks and stop on the one for which you'd like to use the Inspector. Do >>> not interact with the track, simply leave VoiceOver focused on the track >>> and use the single letter commands. It works as long as you follow that >>> procedure. The l key does not read the peak meter, it reads the level meter. >>> HTH >>> >>>> On Sep 30, 2017, at 6:29 AM, Ramy Moustafa <[email protected]> >>>> wrote: >>>> >>>> Hi Slau And Marten: >>>> Thanks so much for your advices. >>>> i found 2 things when using flo tools: >>>> 1- when the inspector is on, using v for the volume didn’t do anything, i >>>> press the L to read the week meeter but nothing happened, i press N to >>>> set the ban, but nothing happened, Vo didn’t say anything, >>>> but the flo tools is working in all windows with no problems >>>> >>>> And just a small question, where is the pause in pro tools? >>>> what i do now that if i need to pause, i press control-n while playing >>>> and when i need to stop, i press the space bar, and the playback stops >>>> where i need. >>>> but if am making selection, i hit control-n again and follows your advices. >>>> is there a pause button or just the space bar? >>>> >>>> >>>> Thanks in advance. >>>> >>>>> On Sep 29, 2017, at 9:50 PM, Slau Halatyn <[email protected]> wrote: >>>>> >>>>> Yes, or you can also simply choose it from the Options menu as an >>>>> alternative but double-tapping works well. >>>>>> On Sep 29, 2017, at 11:48 AM, Martin (Punky) Sopart <[email protected]> >>>>>> wrote: >>>>>> >>>>>> Hi Ramy! >>>>>> >>>>>> Using Flo Tools you have to double tap. >>>>>> Pressing once only tells you the current status of the function. >>>>>> Double tapping changes the status. >>>>>> >>>>>> Not using Flo Tools will change the status each press without any speech >>>>>> feedback. >>>>>> >>>>>> Best! / Martin >>>>>>> -----Original Message----- >>>>>>> From: [email protected] [mailto:[email protected]] >>>>>>> On Behalf Of Ramy Moustafa >>>>>>> Sent: Friday, September 29, 2017 5:13 PM >>>>>>> To: protools mailing list <[email protected]> >>>>>>> Subject: Re: Selection Questions >>>>>>> >>>>>>> Hi Slau: >>>>>>> sorry but i don’t know that i must press double tap on the Control-n to >>>>>>> change it’s status, i assume that each time i will press control-n >>>>>>> will change >>>>>>> it’s status,. >>>>>>> and it also solve my problem in punch and pre and postural, double tap >>>>>>> the >>>>>>> cmd-k, solved the issue, >>>>>>> sorry for disturbance. >>>>>>> thanks so much >>>>>>>> On Sep 29, 2017, at 4:47 AM, Slau Halatyn <[email protected]> >>>>>>>> wrote: >>>>>>>> >>>>>>>> Ramy, >>>>>>>> You have Insertion Follows Playback checked. Press Control+n and you >>>>>>> should hear Flo Tools inform you that it is enabled. Double-tap >>>>>>> Control+n to >>>>>>> turn it off or you can uncheck it from the Options menu. >>>>>>>> >>>>>>>>> On Sep 28, 2017, at 5:50 PM, Ramy Moustafa >>>>>>> <[email protected]> wrote: >>>>>>>>> >>>>>>>>> Hi Slau: >>>>>>>>> Thanks so much for This, i checked them now, and both are checked. but >>>>>>> after i made my selection, i press space to stop the play back, hit >>>>>>> space again >>>>>>> bring me to the place that am on now not the place that my selection >>>>>>> started >>>>>>> in. >>>>>>>>> am i missing something There? >>>>>>>>>> On Sep 28, 2017, at 4:14 PM, Slau Halatyn <[email protected]> >>>>>>> wrote: >>>>>>>>>> >>>>>>>>>> Don't disable it. Timeline and Edit selection should always be >>>>>>>>>> linked. If >>>>>>> you've made a selection but now want to put the insertion point at the >>>>>>> start, >>>>>>> where the selection begins, press the down arrow. To put the insertion >>>>>>> at >>>>>>> the end, press up arrow. This only works when there's a selection and, >>>>>>> as >>>>>>> soon as you press either the down or up arrow, the selection is gone >>>>>>> and the >>>>>>> insertion point exists. I think this stuff should have been covered in >>>>>>> the Pro >>>>>>> Tools with Speech material. Too big of a subject to cover in an email. >>>>>>>>>> >>>>>>>>>>> On Sep 28, 2017, at 2:28 AM, Ramy Moustafa >>>>>>> <[email protected]> wrote: >>>>>>>>>>> >>>>>>>>>>> and sorry slau, you want me to enable or disable the time line >>>>>>> selection? >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> On 9/28/17, Ramy Moustafa <[email protected]> wrote: >>>>>>>>>>>> aha, I got your point, so, if I'm selecting a big place, let's say >>>>>>>>>>>> from bar 2 to bar 20, how I can go to bar 2 while I'm in bar 20? I >>>>>>>>>>>> mean I need to go to the start of my selectionnot the start of my >>>>>>>>>>>> session, is it possible? >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> On 9/28/17, Slau Halatyn <[email protected]> wrote: >>>>>>>>>>>>> Ramy, >>>>>>>>>>>>> You can't have a selection and navigate anywhere else unless you >>>>>>> unlink >>>>>>>>>>>>> the >>>>>>>>>>>>> timeline and edit selection. I'd highly recommend you don't do >>>>>>>>>>>>> that >>>>>>>>>>>>> because >>>>>>>>>>>>> it will not be possible for you to reliably use Pro Tools as a >>>>>>>>>>>>> blind >>>>>>>>>>>>> user. >>>>>>>>>>>>> If you want to go to the beginning of the session, you'll simply >>>>>>>>>>>>> lose >>>>>>>>>>>>> your >>>>>>>>>>>>> selection. That's how it works for everybody, sighted and blind. >>>>>>>>>>>>> You >>>>>>>>>>>>> probably think of selections as markers that can be set and >>>>>>> remembered >>>>>>>>>>>>> and >>>>>>>>>>>>> then selecting a range between those two markers to make a >>>>>>> selection. >>>>>>>>>>>>> That's >>>>>>>>>>>>> different from making a selection with the down and up arrows >>>>>>> while the >>>>>>>>>>>>> playback is engaged. >>>>>>>>>>>>> Slau >>>>>>>>>>>>> >>>>>>>>>>>>>> On Sep 27, 2017, at 4:09 PM, Ramy Moustafa >>>>>>> <[email protected]> >>>>>>>>>>>>>> wrote: >>>>>>>>>>>>>> >>>>>>>>>>>>>> Thanks so much ichael, but how I can move inside my selection, >>>>>>> and go >>>>>>>>>>>>>> to the start of my selection? >>>>>>>>>>>>>> >>>>>>>>>>>>>> On 9/27/17, Michael Kuhlmann <[email protected]> wrote: >>>>>>>>>>>>>>> Hi Rami, >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> first of all, make sure, that „link time and edit-selection“ >>>>>>>>>>>>>>> and „link >>>>>>>>>>>>>>> track >>>>>>>>>>>>>>> and edit-selection“ are enabled. You can find these options in >>>>>>>>>>>>>>> the >>>>>>>>>>>>>>> options-menu. The up and down-keys only work when you select >>>>>>> while >>>>>>>>>>>>>>> playing. >>>>>>>>>>>>>>> So, in order to use these shortcuts, you have to press play, >>>>>>> followed >>>>>>>>>>>>>>> by >>>>>>>>>>>>>>> the >>>>>>>>>>>>>>> shortcuts you mentioned for selecting your start and endpoint. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Best >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Michael >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>> You received this message because you are subscribed to the >>>>>>> Google >>>>>>>>>>>>>>> Groups >>>>>>>>>>>>>>> "Pro Tools Accessibility" group. >>>>>>>>>>>>>>> To unsubscribe from this group and stop receiving emails from >>>>>>>>>>>>>>> it, >>>>>>> send >>>>>>>>>>>>>>> an >>>>>>>>>>>>>>> email to [email protected]. >>>>>>>>>>>>>>> For more options, visit https://groups.google.com/d/optout. >>>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> -- >>>>>>>>>>>>>> Ramy MoustafaSaber >>>>>>>>>>>>>> Music instructor @: >>>>>>>>>>>>>> Faculty ofmusical education >>>>>>>>>>>>>> Music arranger and Sound engineer @: >>>>>>>>>>>>>> Harmony Recording Studio >>>>>>>>>>>>>> https://www.facebook.com/HarmonyRecordingStudio.eg >>>>>>>>>>>>>> >>>>>>>>>>>>>> -- >>>>>>>>>>>>>> You received this message because you are subscribed to the >>>>>>> Google >>>>>>>>>>>>>> Groups >>>>>>>>>>>>>> "Pro Tools Accessibility" group. >>>>>>>>>>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>>> send >>>>>>>>>>>>>> an >>>>>>>>>>>>>> email to [email protected]. >>>>>>>>>>>>>> For more options, visit https://groups.google.com/d/optout. >>>>>>>>>>>>> >>>>>>>>>>>>> -- >>>>>>>>>>>>> You received this message because you are subscribed to the >>>>>>> Google Groups >>>>>>>>>>>>> "Pro Tools Accessibility" group. >>>>>>>>>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>>> send an >>>>>>>>>>>>> email to [email protected]. >>>>>>>>>>>>> For more options, visit https://groups.google.com/d/optout. >>>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> -- >>>>>>>>>>>> Ramy MoustafaSaber >>>>>>>>>>>> Music instructor @: >>>>>>>>>>>> Faculty ofmusical education >>>>>>>>>>>> Music arranger and Sound engineer @: >>>>>>>>>>>> Harmony Recording Studio >>>>>>>>>>>> https://www.facebook.com/HarmonyRecordingStudio.eg >>>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> -- >>>>>>>>>>> Ramy MoustafaSaber >>>>>>>>>>> Music instructor @: >>>>>>>>>>> Faculty ofmusical education >>>>>>>>>>> Music arranger and Sound engineer @: >>>>>>>>>>> Harmony Recording Studio >>>>>>>>>>> https://www.facebook.com/HarmonyRecordingStudio.eg >>>>>>>>>>> >>>>>>>>>>> -- >>>>>>>>>>> You received this message because you are subscribed to the Google >>>>>>> Groups "Pro Tools Accessibility" group. >>>>>>>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>>>>>>> send >>>>>>> an email to [email protected]. >>>>>>>>>>> For more options, visit https://groups.google.com/d/optout. >>>>>>>>>> >>>>>>>>>> -- >>>>>>>>>> You received this message because you are subscribed to the Google >>>>>>> Groups "Pro Tools Accessibility" group. >>>>>>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>>>>>> send >>>>>>> an email to [email protected]. >>>>>>>>>> For more options, visit https://groups.google.com/d/optout. >>>>>>>>> >>>>>>>>> -- >>>>>>>>> You received this message because you are subscribed to the Google >>>>>>> Groups "Pro Tools Accessibility" group. >>>>>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>>>>> send an >>>>>>> email to [email protected]. >>>>>>>>> For more options, visit https://groups.google.com/d/optout. >>>>>>>> >>>>>>>> -- >>>>>>>> You received this message because you are subscribed to the Google >>>>>>> Groups "Pro Tools Accessibility" group. >>>>>>>> To unsubscribe from this group and stop receiving emails from it, send >>>>>>>> an >>>>>>> email to [email protected]. >>>>>>>> For more options, visit https://groups.google.com/d/optout. >>>>>>> >>>>>>> -- >>>>>>> You received this message because you are subscribed to the Google >>>>>>> Groups >>>>>>> "Pro Tools Accessibility" group. >>>>>>> To unsubscribe from this group and stop receiving emails from it, send >>>>>>> an >>>>>>> email to [email protected]. >>>>>>> For more options, visit https://groups.google.com/d/optout. >>>>>> >>>>>> -- >>>>>> You received this message because you are subscribed to the Google >>>>>> Groups "Pro Tools Accessibility" group. >>>>>> To unsubscribe from this group and stop receiving emails from it, send >>>>>> an email to [email protected]. >>>>>> For more options, visit https://groups.google.com/d/optout. >>>>> >>>>> -- >>>>> You received this message because you are subscribed to the Google Groups >>>>> "Pro Tools Accessibility" group. >>>>> To unsubscribe from this group and stop receiving emails from it, send an >>>>> email to [email protected]. >>>>> For more options, visit https://groups.google.com/d/optout. >>>> >>>> -- >>>> You received this message because you are subscribed to the Google Groups >>>> "Pro Tools Accessibility" group. >>>> To unsubscribe from this group and stop receiving emails from it, send an >>>> email to [email protected]. >>>> For more options, visit https://groups.google.com/d/optout. >>> >>> -- >>> You received this message because you are subscribed to the Google Groups >>> "Pro Tools Accessibility" group. >>> To unsubscribe from this group and stop receiving emails from it, send an >>> email to [email protected]. >>> For more options, visit https://groups.google.com/d/optout. >> >> -- >> You received this message because you are subscribed to the Google Groups >> "Pro Tools Accessibility" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> For more options, visit https://groups.google.com/d/optout. > > -- > You received this message because you are subscribed to the Google Groups > "Pro Tools Accessibility" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout.
-- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
