To create a tempo map, put the insertion point where the music would be at the equivalent of bar 1, beat 1 and press Command+I for Identify beat. a dialog will open. Simply press 1 to identify it as bar 1 and hit Return. If it's a fairly steady tempo, you can move to where the music would be at, say, bar 9 and repeat the process but type the number 9 and press Return. Once you've done this twice, the bar/beat markers will be fairly close from there. Continue the process throughout the tune. Sometimes you can get away with doing every 8 bars or so but sometimes it's necessary to do 4 bars at a time if tempos change. Sometimes you'll need to do every bar if there's a pronounced accelerando or ritardando. Also, in cases where there's no clear downbeat on 1, you can move to beat 3, for example, and, with the Identify beat dialog open, type the bar number, press decimal and 3 and hit Return. It's all a matter of defining exactly what is what as often as it is necessary in order for the timeline to reflect what's happening in the music. Naturally, it helps to have a click track to verify how things are going. Note that, if there are any meter changes, you'll have to create a 4/4 meter event at the top and, once you've established the bar/beat marker for where a meter change occurs, enter a meter change at that bar and continue. That's the most basic approach to setting up a tempo map for pre-existing material. HTH, Slau
> On Oct 15, 2017, at 2:23 AM, Steve Sparrow <[email protected]> wrote: > > Hi Guys. Is there any way to tempo map in protools with Voice Over. If so any > thoughts on tempo mapping and how to do it. I’m really needing to do this on > a few tracks. > Steve > > -- > You received this message because you are subscribed to the Google Groups > "Pro Tools Accessibility" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
