Hi Peeter:
1st of all, thanks so much for your quick reply.
1, yes, when i open the unit, all faders move to the bottomn.
2, inside protools, there is no protocol,
i went to 
Peripherals, and the only place that i can find all you told me, is the midi 
control.
don’t know if am doing right or wrong.
thanks in advance
...
> On Apr 8, 2018, at 9:00 AM, Peter Lundblad <peter.n.lundb...@gmail.com> wrote:
> 
> Hi,
> 
> When I open a session, the faders move to reflect the volums. Also, when 
> pressing the arrow keys next to the big knob on the right side of the 
> surface, they move to reflect volumes as the tracks shift.
> 
> Things that I would check:
> - When you power up the unit, will all faders move to their minimum 
> positions? They do so for me.
> - When adding the faderport in protools, make sure that you set the following:
> + Protocol: Hui
> + Both send to and receive from set to the faderport
> + # channels set to 8
> 
> If you have sighted assistance available, there's a few tests you can run 
> from the faderport menus to test motors, touch, all the controls etc. The 
> first one is a test that just runs sliders back and forth to verify that the 
> motors work.
> 
> Hope this is helpful,
> //Peter
> 
> On Sat, Apr 7, 2018 at 11:26 PM, Ramy Moustafa <ramy.moustaf...@gmail.com 
> <mailto:ramy.moustaf...@gmail.com>> wrote:
> Hi Peeter:
> I installed it, pro tools now can see the Presonus 8, and i  can control my 
> volumes etc.
> but the question is that, i suspected when i willl open a new session, my 
> faders will move reflect the volumes that are in the tracks now, but it did 
> not happen. must i do extra thing in setup or what?
> thanks so much 
> 
>> On Apr 6, 2018, at 10:25 AM, Peter Lundblad <peter.n.lundb...@gmail.com 
>> <mailto:peter.n.lundb...@gmail.com>> wrote:
>> 
>> Hi there,
>> 
>> When I set mine up, I had someone help me through the setup menu. However, 
>> the sequence of buttons you need to press is deterministic, so it is 
>> definitely possible to do it without sighted assistance once you learn the 
>> menu structure. I don't remember it (since I only did it once) and the 
>> manual assumes that you can read the little displays, so unless you need to 
>> change the setting often, it might just be easier to have someone help you. 
>> There are a few other settings in the menu system that are useful and might 
>> be worth tinkering with such as fader motor speed and touch sensitivity. 
>> That might make it worth the effort to note down the menu structure for 
>> later.
>> 
>> Best,
>> //Peter
>> 
>> On Fri, Apr 6, 2018 at 12:06 AM, Ramy Moustafa <ramy.moustaf...@gmail.com 
>> <mailto:ramy.moustaf...@gmail.com>> wrote:
>> Hi all:
>> 
>> I have just got my Presonus fader 8, and need to know if selecting the hw 
>> mode in the fader 8 is accessible for us? i mean can we do it alone or do we 
>> need sited assistance?
>> Thanks so much
>> 
>> --
>> You received this message because you are subscribed to the Google Groups 
>> "Pro Tools Accessibility" group.
>> To unsubscribe from this group and stop receiving emails from it, send an 
>> email to ptaccess+unsubscr...@googlegroups.com 
>> <mailto:ptaccess%2bunsubscr...@googlegroups.com>.
>> For more options, visit https://groups.google.com/d/optout 
>> <https://groups.google.com/d/optout>.
>> 
>> 
>> -- 
>> You received this message because you are subscribed to the Google Groups 
>> "Pro Tools Accessibility" group.
>> To unsubscribe from this group and stop receiving emails from it, send an 
>> email to ptaccess+unsubscr...@googlegroups.com 
>> <mailto:ptaccess+unsubscr...@googlegroups.com>.
>> For more options, visit https://groups.google.com/d/optout 
>> <https://groups.google.com/d/optout>.
> 
> 
> -- 
> You received this message because you are subscribed to the Google Groups 
> "Pro Tools Accessibility" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to ptaccess+unsubscr...@googlegroups.com 
> <mailto:ptaccess+unsubscr...@googlegroups.com>.
> For more options, visit https://groups.google.com/d/optout 
> <https://groups.google.com/d/optout>.
> 
> 
> -- 
> You received this message because you are subscribed to the Google Groups 
> "Pro Tools Accessibility" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to ptaccess+unsubscr...@googlegroups.com 
> <mailto:ptaccess+unsubscr...@googlegroups.com>.
> For more options, visit https://groups.google.com/d/optout 
> <https://groups.google.com/d/optout>.

-- 
You received this message because you are subscribed to the Google Groups "Pro 
Tools Accessibility" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to ptaccess+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Reply via email to