Hi Sean, Excellent! Thanks so much for the hlp. After going through your steps below and making sure that the correct items are ticked, the Dock is now working as it used to do. Cheers and thanks again. Toby
> On 26 Feb 2020, at 12:55, Sean A. Cummins <seanacumm...@gmail.com> wrote: > > Hi Toby, > > OK, here are a few settings to check. > > > 1. Open the EuCon Control app from your operating system Dock, you can > also use the (Command plus tab) until you hear EuCon Control. > 2. Press (Command plus number 1) in the QWERTY keyboard above the > letter (Q). This is the shortcut key and will open the EuCon settings > window. > 3. Navigate to the “General Tab” and (VO spacebar) to click and select > the General settings view. > 4. Using the Voiceover Item Chooser, (VO plus I), type the first three > letters of the word “Select”. This will bring up a list of > approximately 9 items. You will need to one by one, VO click each of > the following three items related to your issue in order to draw > Voiceover’s focus to the check box location. If they’re not checked, > just VO click each to check the boxes insuring that the PT Dock will > track your selections in the Track List View. > > Item #1: > “Select most recently attentioned track” Should be checked. > Item #2: > “Attention most recently selected track Legacy” should be checked. > Item number 3: > “Auto Bank to selected track” should be checked. > > Close the settings window with (Command plus W), and then hide the > EuCon Control with (Command plus H). > > I hope this helps. > > Sean > > > > On 2/25/20, Byron Harden <sticomu...@gmail.com> wrote: >> Cool deal. >> best >> >>> On Feb 25, 2020, at 2:34 PM, Slau Halatyn <slauhala...@gmail.com> wrote: >>> >>> I forwarded your message to sean. >>> >>> >>>> On Feb 25, 2020, at 11:10 AM, Toby Davey <tobydavey...@gmail.com >>>> <mailto:tobydavey...@gmail.com>> wrote: >>>> >>>> Hi Sean, >>>> I now have the Dock working with PT and after a bit of time trying to >>>> work out a few things now I am able to make selections of audio with the >>>> Dock wheel in jog mode with the keyboard keys such as holding shift while >>>> scrubbing and a combination of using command and E to make split clips >>>> with using option, shift and tab to select from play point with the >>>> wheel back to the split. >>>> Not sure if you saw my email to Slau but I wondered how you engage the >>>> channel strip and the fader on the Dock to the track you are working on. >>>> >>>> I had a screen share with a guy from Avid re the Dock and he did >>>> something in PT and the fader shot into life and it had been engaged ever >>>> since he did what he did but for some reason the fader has dropped down >>>> and I can’t seem to work out how to engage it with the track I am editing >>>> on. >>>> Any tips greatly appreciated. >>>> Cheers >>>> Toby >>>> >>>> >>>>> On 8 Feb 2020, at 20:27, Sean A. Cummins <seanacumm...@gmail.com >>>>> <mailto:seanacumm...@gmail.com>> wrote: >>>>> >>>>> Under security, you need to allow for Yukon under the accessibility >>>>> tab. >>>>> >>>>> Sent from my iPhone, so forgive Siri’s mistakes and my brevity. >>>>> >>>>>> On Feb 8, 2020, at 12:03 PM, Toby Davey <tobydavey...@gmail.com >>>>>> <mailto:tobydavey...@gmail.com>> wrote: >>>>>> >>>>> >>>>> >>>>> Hi, >>>>> >>>>> I have been trying to connect my new Pro Tools Dock to my Mac but seem >>>>> to have an issue with EuCon seeing the Dock. >>>>> >>>>> I have done all the steps as required so far in setting things up. >>>>> Connected the Dock to my Mac, switched it on with my Mac up and running. >>>>> Registered the Dock with Avid. Downloaded and installed EuCon on my >>>>> Mac. It is after this stage that I have a problem. >>>>> >>>>> According to the instructions after installing EuCon and having to >>>>> restart my Mac to install it, when restarting my Mac with the Dock >>>>> connected there should be a lit EuCon icon on the task bar. >>>>> >>>>> No EuCon icon appears on the Task bar and my sighted wife checked this >>>>> for me too. >>>>> >>>>> In Mac preferences there is a tab for EuCon and an empty table of >>>>> devices. On Googling around I can’t seem to find any answers or >>>>> suggestions on how to either get the EuCon onto the task bar or any >>>>> hints and tips on what to do. >>>>> >>>>> I have a USB C to Ethernet adaptor which is connecting my Dock to my Mac >>>>> and I can see the adaptor in network connections in preferences. >>>>> >>>>> I have been into Pro Tools and ticked the box for EuCon connections just >>>>> in case. >>>>> >>>>> I have tried powering down my Mac and Dock and restarting but can’t seem >>>>> to get them to talk to each other. >>>>> >>>>> I would have called Avid Support here in the UK but they are not open >>>>> over the weekend. >>>>> >>>>> Any suggestions greatly appreciated. >>>>> >>>>> Cheers >>>>> >>>>> Toby >>>>> >>>>> , >>>>> >>>>> >>>>> -- >>>>> You received this message because you are subscribed to the Google >>>>> Groups "Pro Tools Accessibility" group. >>>>> To unsubscribe from this group and stop receiving emails from it, send >>>>> an email to ptaccess+unsubscr...@googlegroups.com >>>>> <mailto:ptaccess+unsubscr...@googlegroups.com>. >>>>> To view this discussion on the web visit >>>>> https://groups.google.com/d/msgid/ptaccess/80a85e9e-8e98-4b8f-b8f8-4d00ee0d8e0d%40googlegroups.com >>>>> <https://groups.google.com/d/msgid/ptaccess/80a85e9e-8e98-4b8f-b8f8-4d00ee0d8e0d%40googlegroups.com?utm_medium=email&utm_source=footer>. >>>>> >>>>> -- >>>>> You received this message because you are subscribed to a topic in the >>>>> Google Groups "Pro Tools Accessibility" group. >>>>> To unsubscribe from this topic, visit >>>>> https://groups.google.com/d/topic/ptaccess/8cQyYuK3Jss/unsubscribe >>>>> <https://groups.google.com/d/topic/ptaccess/8cQyYuK3Jss/unsubscribe>. >>>>> To unsubscribe from this group and all its topics, send an email to >>>>> ptaccess+unsubscr...@googlegroups.com >>>>> <mailto:ptaccess+unsubscr...@googlegroups.com>. >>>>> To view this discussion on the web visit >>>>> https://groups.google.com/d/msgid/ptaccess/B283911B-F6D0-4B92-92A2-7EDCFF490F46%40gmail.com >>>>> <https://groups.google.com/d/msgid/ptaccess/B283911B-F6D0-4B92-92A2-7EDCFF490F46%40gmail.com?utm_medium=email&utm_source=footer>. >>>> >>>> >>>> -- >>>> You received this message because you are subscribed to the Google Groups >>>> "Pro Tools Accessibility" group. >>>> To unsubscribe from this group and stop receiving emails from it, send an >>>> email to ptaccess+unsubscr...@googlegroups.com >>>> <mailto:ptaccess+unsubscr...@googlegroups.com>. >>>> To view this discussion on the web visit >>>> https://groups.google.com/d/msgid/ptaccess/76B9EAAC-DF9E-4D57-9D9A-B6FCC5C61FD4%40gmail.com >>>> <https://groups.google.com/d/msgid/ptaccess/76B9EAAC-DF9E-4D57-9D9A-B6FCC5C61FD4%40gmail.com?utm_medium=email&utm_source=footer>. >>> >>> >>> -- >>> You received this message because you are subscribed to the Google Groups >>> "Pro Tools Accessibility" group. >>> To unsubscribe from this group and stop receiving emails from it, send an >>> email to ptaccess+unsubscr...@googlegroups.com >>> <mailto:ptaccess+unsubscr...@googlegroups.com>. >>> To view this discussion on the web visit >>> https://groups.google.com/d/msgid/ptaccess/51F63CB5-143E-4520-88E6-00DEE5366258%40gmail.com >>> <https://groups.google.com/d/msgid/ptaccess/51F63CB5-143E-4520-88E6-00DEE5366258%40gmail.com?utm_medium=email&utm_source=footer>. >> >> -- >> You received this message because you are subscribed to the Google Groups >> "Pro Tools Accessibility" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to ptaccess+unsubscr...@googlegroups.com. >> To view this discussion on the web visit >> https://groups.google.com/d/msgid/ptaccess/CE57CB92-9F34-4F13-8348-AB53B9E651B6%40gmail.com. >> > > -- > You received this message because you are subscribed to a topic in the Google > Groups "Pro Tools Accessibility" group. > To unsubscribe from this topic, visit > https://groups.google.com/d/topic/ptaccess/8cQyYuK3Jss/unsubscribe. > To unsubscribe from this group and all its topics, send an email to > ptaccess+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/ptaccess/CAE5dyGPZEL4HCNneuwi7GjR%2BkHXphWD44SgJ%2B_WLFB3zc2UJbg%40mail.gmail.com. -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to ptaccess+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/ptaccess/615C2255-8ABB-4EC6-896A-0B45475BCFFB%40gmail.com.
