Hi,
Thanks to all involved in putting Flo Tools together a fantastic bit of software making life a bit easier for all us visually impaired Pro Tools users. I have only recently installed Flo Tools as I was waiting for the upgrade to Pro Tools 2020.3 to become available here in the UK in my Avid Link and then waited a bit for Flo Tools 2020.3.1 to come out too. I have listened to Slau’s great audio introduction to Flo Tools and read through the ReadMe notes before installing and also have been keeping an eye on all the emails and WhatsApp messages about Flo Tools too. So now to my observations on Flo Tools. Firstly, this might be me, might be due to my Mac but am I right in thinking that the Inspector group commands such as ‘L’, ‘V’, ‘m’ etc only work in the Mix window? In the Edit window I can do things like double tapp ‘L’ to turn level metering on and off but don’t get any feedback of the levels unless I am in the Mix window, likewise with volume, etc. When installing I made sure that all the settings for VoiceOver, Pro Tools, Keyboard Maestro and even switching the keyboard to US were done per the instructions in the ReadMe pages. All the Flo Tools short cuts work as should be and the inspector group commands work as mentioned above in the Mix window. So did I miss something in the ReadMe or the great audio introduction to Flo Tools as I spent quite a lot of time today trying to work out why the inspector group commands were not working in the Edit window, going through old PTAccess Group emails, etc. As I say a great piece of software and thanks again for all those involved in Flo Tools. Cheers Toby -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/ptaccess/db052c2c-72ca-4ad5-9f93-0b81de51f845%40googlegroups.com.
