Re: Basic question about using Boom plugin in ProTools

[Rory McDonald]

There are 2 things to try.  though  I must also say that I don't use boom much, so thereby can not comment on the recording of their sample patterns. On with the things to try: First change your time signature from 4/4 to 3/4. You do this by hitting command 1 to go to the time operations window, and there theres 2 textfields to change your signature. You should then hear patterns in 3/4 as desired. Second, if this for whatever reason doesn't work, on the lower keys of your keyboard, you can play the drum samples like a standard midi drum kit. You could always create a pattern of your own doing it that way, aftr all the boom plug inself is largely inaccessible other than playing the keys on the keyboard and choosing presets. Hope this helps.  Rory On Dec 27, 2022, at 1:04 PM, clgillan...@gmail.com wrote:  OK, I have the stock Boom plugin which comes with the installation of ProTools.   I see the different presets, and I also see that if I hold down a note like C4, or rather middle C, on my midi controller, as long as that note is held, it plays the drum pattern associated with that preset.   The problem is, I’ve gone through a lot of the presets, but don’t seem to find anything that is 3 / 4 waltz time. Everything seems to be 4 / 4.   I was curious if there is a setting somewhere within the plugin window that would let me configure the time signature it’s using, as perhaps when looking, I missed something which should have been fairly obvious. Or, is it something where the patterns to choose from are pretty well pre-fix recorded, you get what you get.   Thanks for any help.   Chris. -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to ptaccess+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/ptaccess/024a01d91955%249a4c0c50%24cee424f0%24%40gmail.com. -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to ptaccess+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/ptaccess/3AC34375-B944-4884-BC63-A24FD9CE8E67%40rogers.com.