Fernando Aguado wrote:
>
> Hello all:
> Firtsly, excuse me because my english isn't the best.
>
> I have 2 problems with Ptolemy 0.7:
>
> 1) I have a program with 45.000 lines, and at the moment of using the
> command
Do you mean that you have written a star file (.pl)? If yes, what Domain
you are using?
>
> make-star, popup an error window, telling to me that it cannot read a
> file in
>
> the directory /tmp
>
> My Linux's partition has 700Mbytes, and it's 17% of using. Then, I think
> it
> isn't of lack of memory.
> could you tell me what is the problem? and, what is the solution?
>
1) Make sure you have read all necessary information from the
Ptolemy site (README, INSTALL, Appendix A: Installation and
Troubleshooting, Programmer's Manual etc.) before going on.
2) Which Linux (version/release), which Ptolemy version/release
(downloaded binaries or self compiled binaries), and which
gcc/egcs/c++ (version/release) are you using? It should be
the same compiler version which had been used to compile
the Ptolemy binaries.
3) An exact(!) copy of all the error messages and warnings
(appearing in vem window, standard output/error, tcl/tk
window) is needed. Otherwise I will not be able to help
you.
4) What does the command "df" and "df -i" say?
5) What does "ls -al /tmp" say?
Regards,
--
Wolfgang Reimer (Dr.-Ing.)
T U I -- Technical University of Ilmenau, GERMANY, Thuringia
Address: TU Ilmenau, FEI/IKM, PF 100565, 98684 Ilmenau, GERMANY
http://ikmcip1.e-technik.tu-ilmenau.de Phone: +49-3677-69-2619
mailto:[EMAIL PROTECTED] Fax : +49-3677-69-1195
V I R T U A L P H O T O N I C S I N C O R P O R A T E D
mailto:[EMAIL PROTECTED] http://www.vp-bned.com
----------------------------------------------------------------------------
Posted to the ptolemy-hackers mailing list. Please send administrative
mail for this list to: [EMAIL PROTECTED]
