>>>>> "Gary" == Gary <[email protected]> writes:
Gary> [...] Do either of them respond to TFTP during their boot phase Gary> or even have boot loaders that enable the network interface Gary> prior to loading a kernel? And can you interrupt the boot loader Gary> from the serial console? There is nothing that appears to allow interruption during boot on the skypilot custom board. The Peplink board has a bootloader that you can interrupt, but it does not use TFTP, but some crazy thing that delivers an image via ICMP Type 15 packets. I have a packet dump of that somewhere. In any case, when I tried to load an image built with the PepLink SDK with their image uploader, I got a message that "Block 0 is invalid" or something, so my guess is that SkyPilot modified the bootloader to look for a magic block. My guess could be wrong. -- Russell Senior, President [email protected]
-- The Personal Telco Project - http://www.personaltelco.net/ Donate to PTP: http://www.personaltelco.net/donate Archives: http://news.gmane.org/gmane.network.wireless.portland.general/ Etiquette: http://www.personaltelco.net/index.cgi/MailingListEtiquette List information: http://lists.personaltelco.net To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected]
