Hi, However, this is not the case when using the Line-In jack. Also, about the AC ripple, that was just a thought, not a fact.
Dan ----- Original Message ----- From: "Curtis Delzer" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Saturday, August 14, 2004 8:31 AM Subject: Re: AC hum during recording > Wow, in such a high priced piece of equipment, it seems to me that if that is the case, very poor judgment has been given the power supply's design if any ripple at all is being passed to the PTR1 regardless of the > level of the input volume. > > Curtis Delzer > On Sun, 1 Aug 2004 04:22:55 -0700, dnkeys wrote: > > Hi, > You might flip the wall plug for the adapter, this might limit it a little. > Also, I have noticed that if the recording volume is over say 14 or 15, then > you might notice the hum when plugged in to AC. > I try to keep my recording volume between 10 and 13, but of course that will > depend on what and where you are recording. > When possible, I also would rather use a mixer to control the preamping of > all my signals and I prefer using line-in instead of mike if at all > possible. > I suspect that the power supply might be letting some AC ripple through. > Just my thoughts. > > Dan > ----- Original Message ----- > From: "stever2525" <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Sent: Sunday, August 01, 2004 3:17 AM > Subject: AC hum during recording > > > > Yesterday, I attended and recorded a seminar. I was near an outlet, so I > > plugged in. That way I didn't have to worry about running out of power. I > > recorded using an external mic. When I got home, I noticed the playback > had > > a very noticeable AC hum. I did expect it to be very low in the > > background but was louder than I expected. I could understand what was > being > > said but the hum was still annoying. In the past, with other recording > > equipment, this hasn't been a problem. > > I then tried another mic recording with and without AC with the same > > problem. This is only a problem with external recording. > > Is this inherent with the Plextalk or is there something I can do? Thank > > you. > > > > > --------------------------------------------------------------------- > > To unsubscribe, e-mail: [EMAIL PROTECTED] > > For additional commands, e-mail: > [EMAIL PROTECTED] > > > > --------------------------------------------------------------------- > To unsubscribe, e-mail: [EMAIL PROTECTED] > For additional commands, e-mail: [EMAIL PROTECTED] > > > > > > --------------------------------------------------------------------- > To unsubscribe, e-mail: [EMAIL PROTECTED] > For additional commands, e-mail: [EMAIL PROTECTED] > --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
