J. Whilst I'm sure that this approach would certainly be fruitful, it is hardly the kind of helpful advice that this list is about. I would suggest that if you haven't got a more constructive suggestion, it's better not to say anything.
Yusuf, essentially the two operations are much the same. As you have marked each article to start with a heading, You are wanting to use the "Cut Section" feature followed by the "Paste section". A section is the chunk of audio between one heading and the next heading. It is very much like word processing in that you chop the audio from one place with the first action and then you go to where you want the section to be placed and carry out a paste operation. Step by step the operation is as follows: 1. Press the 5 key to go into the menu system 2. Press Enter or the 8 key to go into the Edit menu 3. Press the 4 or 6 key until you are on "Cut Section" and press Enter to select it. 4. You will now be asked to select the starting section and end section to cut. Do this using the 4 or 6 keys and press Enter after you have specified each 5. When asked to do so, press Enter to confirm the cut operation. Once you have cut the correct sections from your recording, you need to do the paste operation. Do this as follows: 1. Use your 4 or 6 keys to select the position where you want to insert your section or sections that you have just cut. 2. Press the 5 key to enter the menu 3. Press Enter to select the Edit menu 4. Press 4 or 6 keys to select the "Paste Section" operation and press Enter to select this operation. 5. Use 4 or 6 keys to confirm that you are in the correct position where you want to paste the sections. The last spoken section will end up following the pasted sections when the operation is complete. 6. Press Enter when you are sure that you are at the correct location. 7. When asked to, press Enter to confirm the operation. This should mean that your sections are re-ordered in the correct positions. Once you have completed the process, you would be wise to double check that things are where they should be. Remember you can always use the "Undo Previous Editing" command if you think you have messed it up. I think that doing this from a CD to a card is the same method but I don't have a card so can't be absolutely sure. Perhaps someone out there can confirm or deny this. Hope this helps. Jamie -----Original Message----- From: J Garcia [mailto:[EMAIL PROTECTED] Sent: 01 September 2004 04:08 To: [EMAIL PROTECTED] Subject: Re: cutting a section and pasting it somewhere else in a recording Read the manual. J Garcia ----- Original Message ----- From: "yusuf" <[EMAIL PROTECTED]> To: "plextalk email list" <[EMAIL PROTECTED]> Sent: Wednesday, September 01, 2004 2:34 AM Subject: cutting a section and pasting it somewhere else in a recording > Hi all, I am using the latest updated version of the PTR1. Over the last > couple of months I have been recording various articles from the Times > newspaper on to a 1 GB PCMCIA card. Each new article has a heading. Last > week I accidentally recorded an article from the 13th of February 1918 > before the article from the 12th. I want to cut the last article (the one > from the 12th) and paste it before the article from the 13th. > > How do I do this? > > Secondly I have some articles on CD that I want to copy on to the card > before the first article on the card. > > How is this done? > > Cheers > Yusuf Osman. Owner of the trekker email list. To subscribe send a blank > email to > > [EMAIL PROTECTED] > > > > --------------------------------------------------------------------- > To unsubscribe, e-mail: [EMAIL PROTECTED] > For additional commands, e-mail: [EMAIL PROTECTED] > --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] -- DISCLAIMER: NOTICE: The information contained in this email and any attachments is confidential and may be privileged. If you are not the intended recipient you should not use, disclose, distribute or copy any of the content of it or of any attachment; you are requested to notify the sender immediately of your receipt of the email and then to delete it and any attachments from your system. RNIB endeavours to ensure that emails and any attachments generated by its staff are free from viruses or other contaminants. However, it cannot accept any responsibility for any such which are transmitted. We therefore recommend you scan all attachments. Please note that the statements and views expressed in this email and any attachments are those of the author and do not necessarily represent those of RNIB. RNIB Registered Charity Number: 226227 Website: http://www.rnib.org.uk --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
