Oliver, On Mon, Jul 23, 2007 at 11:25:37AM +0200, Oliver Hummel wrote: > I want to blank the u-boot starting informations, at the start of my > board on which I work with embedded Linux. Because I don`t want, that > the board send this informations to the serialport. Has somebody an > idea what I have to change in the u-boot configuration for that? I > made some changes in the .diff file --> console=ttyNX0,115200 to > console=NULL. But this change doesn`t solve the problem.
This is a problem with a customer specific OSELAS.BSP(), not with PTXdist. Please post to the right mailing list (embedded linux in this case, but right, we should create an OSELAS.Hilscher list). Note also that for the Hilscher BSP, we don't offer community support. The BSP was done for Hilscher and they are the primary contact for first level support. Nevertheless, tell me if you need further assistence and we'll see what we can do. Robert -- Dipl.-Ing. Robert Schwebel | http://www.pengutronix.de Pengutronix - Linux Solutions for Science and Industry Handelsregister: Amtsgericht Hildesheim, HRA 2686 Hannoversche Str. 2, 31134 Hildesheim, Germany Phone: +49-5121-206917-0 | Fax: +49-5121-206917-9 -- ptxdist mailing list [email protected]
