Suresh Kumar wrote: > Hi, > > I am not able to get the shell prompt. > > The error i am getting is below, > starting pid 544, tty '/dev/console': '/sbin/getty -L 115200 ttyAMA0 > vt100' > > process '/sbin/getty -L 115200 ttyAMA0 vt100' (pid 544) exited. Scheduling > for > restart. > > starting pid 545, tty '/dev/console': '/sbin/getty -L 115200 ttyAMA0 > vt100' > > process '/sbin/getty -L 115200 ttyAMA0 vt100' (pid 545) exited. Scheduling > for restart. > > > > The UBOOT bootargs as below, > bootargs=root=/dev/nfs rw > nfsroot=192.168.1.2:/project3/myprj1/2/platform-versatilepb/root > ip=192.168.1.5 > > > The inittab contents are below, > console::sysinit:/etc/init.d/rcS > console::respawn:/sbin/getty -L 115200 ttyAMA0 vt100 > > # Stuff to do before rebooting > ::ctrlaltdel:/sbin/reboot > ::shutdown:/bin/umount -a -r > > I dont know whats wrong in the configuration. > > Please help me to proceed further. > thanks > suresh > > > > > > > Boot Logs : > =========== > > > U-Boot 1.2.0 (Sep 26 2007 - > 17:32:22) > > > > DRAM: 64 > MB > > NAND: NAND device: Manufacturer ID: 0x2c, Chip ID: 0xda (Micron NAND 256MiB > 3,3V > 8-bit) > 256 > MiB > > DataFlash:AT45DB642 > > Nb pages: > 8192 > > Page Size: > 1056 > > Size= 8650752 > bytes > > Logical address: > 0xC0000000 > > Area 0: C0000000 to C00020FF Copy Loader > (8kB) > > Area 1: C0002100 to C00041FF Environment > (8kB) > > Area 2: C0004200 to C003665F U-Boot > (195kB) > > Area 3: C0036660 to C0041FFF Secondary Boot > (45kB) > > Area 4: C0042000 to C0461FFF OS > (4MB) > > Area 5: C0462000 to C083FFFF > DF_SPARE > > In: > serial > > Out: > serial > > Err: > serial > > Hit any key to stop autoboot: > 0 > > KB920x >tftp 23000000 > linuximage > > TFTP from server 192.168.1.2; our IP address is > 192.168.1.5 > > Filename > 'linuximage'. > > Load address: > 0x23000000 > > Loading: > ################################################################# > > > ################################################################# > > > ################################################################# > > > ################################################################# > > > ################################################################# > > > ################################################################# > > > ################ > > done > > Bytes transferred = 2073956 (1fa564 > hex) > > KB920x >bootm > 23000000 > > ## Booting image at 23000000 > ... > > Image Name: > Linux-2.6.32.2-ptx-trunk > > Image Type: ARM Linux Kernel Image > (uncompressed) > > Data Size: 2073892 Bytes = 2 > MB > > Load Address: > 20008000 > > Entry Point: > 20008000 > > Verifying Checksum ... > OK > > OK > > > > Starting kernel > ... > > > > Uncompressing > Linux................................................................................................................................ > done, b. > Linux version 2.6.32.2-ptx-trunk ([email protected]) (gcc version > 4.3.2 (OSELAS.Toolchain-1.99.3) ) #1 Sat Mar 6 11:26:41 BDST > 2010 > CPU: ARM920T [41129200] revision 0 (ARMv4T), > cr=c0007177 > > CPU: VIVT data cache, VIVT instruction > cache > > Machine: > KB920x > > Memory policy: ECC disabled, Data cache > writeback > > Clocks: CPU 180 MHz, master 60 MHz, main 10.000 > MHz > > Built 1 zonelists in Zone order, mobility grouping on. Total pages: > 16256 > > Kernel command line: root=/dev/nfs rw > nfsroot=192.168.1.2:/project3/myprj1/2/platform-versatilepb/root > ip=192.168.1.5 > PID hash table entries: 256 (order: -2, 1024 > bytes) > > Dentry cache hash table entries: 8192 (order: 3, 32768 > bytes) > > Inode-cache hash table entries: 4096 (order: 2, 16384 > bytes) > > Memory: 64MB = 64MB > total > > Memory: 60664KB available (3596K code, 381K data, 124K init, 0K > highmem) > > Hierarchical RCU > implementation. > > NR_IRQS:192 > > AT91: 96 gpio irqs in 3 > banks > > Console: colour dummy device > 80x30 > > console [tty0] > enabled > > console [ttyS0] > enabled > > Calibrating delay loop... 89.79 BogoMIPS > (lpj=350208) > > Mount-cache hash table entries: > 512 > > CPU: Testing write buffer coherency: > ok > > NET: Registered protocol family > 16 > > bio: create slab <bio-0> at > 0 > > SCSI subsystem > initialized > > usbcore: registered new interface driver > usbfs > > usbcore: registered new interface driver > hub > > usbcore: registered new device driver > usb > > Switching to clocksource > 32k_counter > > NET: Registered protocol family > 2 > > IP route cache hash table entries: 1024 (order: 0, 4096 > bytes) > > TCP established hash table entries: 2048 (order: 2, 16384 > bytes) > > TCP bind hash table entries: 2048 (order: 3, 40960 > bytes) > > TCP: Hash tables configured (established 2048 bind > 2048) > > TCP reno > registered > > NET: Registered protocol family > 1 > > RPC: Registered udp transport > module. > > RPC: Registered tcp transport > module. > > RPC: Registered tcp NFSv4.1 backchannel transport > module. > > NetWinder Floating Point Emulator V0.97 (double > precision) > > audit: initializing netlink socket > (disabled) > > type=2000 audit(0.557:1): > initialized > > VFS: Disk quotas > dquot_6.5.2 > > Dquot-cache hash table entries: 1024 (order 0, 4096 > bytes) > > JFFS2 version 2.2. (NAND) �© 2001-2006 Red Hat, > Inc. > > msgmni has been set to > 118 > > alg: No test for stdrng > (krng) > > Block layer SCSI generic (bsg) driver version 0.4 loaded (major > 254) > > io scheduler noop > registered > > io scheduler anticipatory > registered > > io scheduler deadline > registered > > io scheduler cfq registered > (default) > > atmel_usart.0: ttyS0 at MMIO 0xfefff200 (irq = 1) is a > ATMEL_SERIAL > > atmel_usart.1: ttyS1 at MMIO 0xfffc0000 (irq = 6) is a > ATMEL_SERIAL > > atmel_usart.2: ttyS2 at MMIO 0xfffc4000 (irq = 7) is a > ATMEL_SERIAL > > atmel_usart.3: ttyS3 at MMIO 0xfffcc000 (irq = 9) is a > ATMEL_SERIAL > > brd: module > loaded > > loop: module > loaded > > eth0: Link now > 100-FullDuplex > > eth0: AT91 ethernet at 0xfefbc000 int=24 100-FullDuplex > (00:16:6f:95:96:40) > > eth0: Intel LXT971A > PHY > > ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) > Driver > > at91_ohci at91_ohci: AT91 > OHCI > > at91_ohci at91_ohci: new USB bus registered, assigned bus number > 1 > > at91_ohci at91_ohci: irq 23, io mem > 0x00300000 > > usb usb1: configuration #1 chosen from 1 > choice > > hub 1-0:1.0: USB hub > found > > hub 1-0:1.0: 1 port > detected > > Initializing USB Mass Storage > driver... > > usbcore: registered new interface driver > usb-storage > > USB Mass Storage support > registered. > > usbcore: registered new interface driver > libusual > > mice: PS/2 mouse device common for all > mice > > usbcore: registered new interface driver > usbhid > > usbhid: v2.6:USB HID core > driver > > TCP cubic > registered > > NET: Registered protocol family > 17 > > eth0: Link now > 100-FullDuplex > > eth0: Link now > 100-FullDuplex > > IP-Config: Guessing netmask > 255.255.255.0 > > IP-Config: > Complete: > > device=eth0, addr=192.168.1.5, mask=255.255.255.0, > gw=255.255.255.255, > > host=192.168.1.5, domain=, > nis-domain=(none), > > bootserver=255.255.255.255, rootserver=192.168.1.2, > rootpath= > > Looking up port of RPC 100003/2 on > 192.168.1.2 > > Looking up port of RPC 100005/1 on > 192.168.1.2 > > VFS: Mounted root (nfs filesystem) on device > 0:13. > > Freeing init memory: > 124K > > init started: BusyBox v1.15.2 (2010-03-06 11:28:21 > BDST) > > starting pid 318, tty '/dev/console': > '/etc/init.d/rcS' > > mounting > filesystems...done. > > running rc.d > services... > > starting > udev > > mounting tmpfs at > /dev > > creating static > nodes > > starting > udevd...done > > waiting for > devices...done > > loading > modules > > > > OSELAS(R)-Generic-2010.01.0 > (ptxdist-2010.01.0/2010-03-06T11:32:34+0700) > > > > > _ > > _ __ | |___ > __ > > | '_ \| __\ \/ > / > > | |_) | |_ > > < > > | .__/ > \__/_/\_\ > > |_| > > > > > > starting pid 544, tty '/dev/console': '/sbin/getty -L 115200 ttyAMA0 > vt100' > > process '/sbin/getty -L 115200 ttyAMA0 vt100' (pid 544) exited. Scheduling > for > restart.
have you got a ttyAMA0 on your platform? cheers, Marc -- Pengutronix e.K. | Marc Kleine-Budde | Industrial Linux Solutions | Phone: +49-231-2826-924 | Vertretung West/Dortmund | Fax: +49-5121-206917-5555 | Amtsgericht Hildesheim, HRA 2686 | http://www.pengutronix.de |
signature.asc
Description: OpenPGP digital signature
-- ptxdist mailing list [email protected]
