On Thu, Sep 30, 2010 at 04:13:03PM +0200, Bernhard Bender wrote:
> We did not update the BSP at all. We can reproduce the problem by
> going from ptx 1.99.19.1 to ptx 2010.08.0 and not changing the BSP or
> anything else.

"going from ptxdist 1.99.19.1 to ptxdist 2010.08.0" means updating the
BSP, right? Your BSP was probably made with 1.99.19.1 for a reason, and
if you use a newer ptxdist version you have to know what you are doing.

> This can be reproduced with the Phytec PhyCARD-S and the corresponding
> Phytec demo base board.

You probably got the BSP for the phyCARD-S from Phytec, and if you have
problems with that BSP, please contact their support.

> So I think the ptxdist update broke things, and we would be glag for
> any hints about what might have changed here.
>
> We already looked at the WM9712 touch driver and tslib and could not
> find a difference.

Please ask for a commercial support offer and we can help you. ptxdist
does not know anything about the WM9712, and even if it did, let me
repeat that this is no free-of-charge support forum.

Regards,
Robert Schwebel
-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

-- 
ptxdist mailing list
[email protected]

Reply via email to