Hi Ronny, This is not the correct place for OSELAS related issues. You should use [email protected] instead.
The "ULPI timeout" is due to ISP1504 which drives the USB host. It sometimes cannot be properly reset. On the last BSP, the bootloader try several times to initialize but if it fails, it generates the "ULPI timeout" errors. Phytec is aware of this issue. Problem is that this chip (ISP1504) is obsolete and no replacement pin compatible chip is available. On the PD9.1.0, the issue was not discovered yet. Ben De : [email protected] [mailto:[email protected]] De la part de Ronny Lerch Envoyé : mardi 2 août 2011 23:52 À : [email protected] Objet : [ptxdist] ULPI timeout on i.MX27 board Hi, I have a issue with "ULPI timeout" on a i.MX27 board with "PHYTEC BSP PD11.1.0 based on OSELAS(R)" when reseting. The initial process shows that the ULPI timeouts. The problem doesn't exist when you power up the board. The board came with "PHYTEC BSP PD9.1.0 based on OSELAS(R)" where the issue wasn't existing. Is anybody aware if the issue? Thanks Ronny
-- ptxdist mailing list [email protected]
