Elektra is upstream-dead and was most probably never used by anyone than myself.
Signed-off-by: Robert Schwebel <[email protected]> --- patches/elektra-0.7.0-r1618/autogen.sh | 1 - .../elektra-0.7.0-r1618-ini-debug.diff | 29 -- .../elektra-0.7.0rc5-file-existence.diff | 26 -- .../elektra-0.7.0rc5-libxml2.diff | 40 --- .../elektra-0.7.0rc5-static-libs.diff | 105 -------- patches/elektra-0.7.0-r1618/series | 4 - rules/elektra.in | 110 -------- rules/elektra.make | 271 -------------------- 8 files changed, 0 insertions(+), 586 deletions(-) delete mode 120000 patches/elektra-0.7.0-r1618/autogen.sh delete mode 100644 patches/elektra-0.7.0-r1618/elektra-0.7.0-r1618-ini-debug.diff delete mode 100644 patches/elektra-0.7.0-r1618/elektra-0.7.0rc5-file-existence.diff delete mode 100644 patches/elektra-0.7.0-r1618/elektra-0.7.0rc5-libxml2.diff delete mode 100644 patches/elektra-0.7.0-r1618/elektra-0.7.0rc5-static-libs.diff delete mode 100644 patches/elektra-0.7.0-r1618/series delete mode 100644 rules/elektra.in delete mode 100644 rules/elektra.make diff --git a/patches/elektra-0.7.0-r1618/autogen.sh b/patches/elektra-0.7.0-r1618/autogen.sh deleted file mode 120000 index 9f8a4cb..0000000 --- a/patches/elektra-0.7.0-r1618/autogen.sh +++ /dev/null @@ -1 +0,0 @@ -../autogen.sh \ No newline at end of file diff --git a/patches/elektra-0.7.0-r1618/elektra-0.7.0-r1618-ini-debug.diff b/patches/elektra-0.7.0-r1618/elektra-0.7.0-r1618-ini-debug.diff deleted file mode 100644 index 954a21d..0000000 --- a/patches/elektra-0.7.0-r1618/elektra-0.7.0-r1618-ini-debug.diff +++ /dev/null @@ -1,29 +0,0 @@ -From: Robert Schwebel <[email protected]> -Subject: ini backend: fix DEBUG handling - -When compiled without "--enable-debug", the ini backend nevertheless -defines DEBUG and thus we get output. - -Signed-off-by: Robert Schwebel <[email protected]> - ---- - src/backends/ini/Makefile.am | 6 +++++- - 1 file changed, 5 insertions(+), 1 deletion(-) - -Index: elektra-0.7.0-r1618/src/backends/ini/Makefile.am -=================================================================== ---- elektra-0.7.0-r1618.orig/src/backends/ini/Makefile.am -+++ elektra-0.7.0-r1618/src/backends/ini/Makefile.am -@@ -1,7 +1,11 @@ - # $Id: Makefile.am 1618 2008-10-17 16:03:11Z [email protected] $ - -+if DEBUG -+INI_DEBUG=-DDEBUG -+endif -+ - #testdir = $(develdocdir)/src/backends/ini/ --AM_CPPFLAGS = -I$(top_srcdir)/src/include -DDEBUG -D_POSIX_SOURCE -D_BSD_SOURCE -+AM_CPPFLAGS = -I$(top_srcdir)/src/include $(INI_DEBUG) -D_POSIX_SOURCE -D_BSD_SOURCE - - ini_sources = ini.c helpers.c parser.c ini.h ../../include/kdb.h ../../include/kdbbackend.h - noinst_LIBRARIES = libelektra-ini.a diff --git a/patches/elektra-0.7.0-r1618/elektra-0.7.0rc5-file-existence.diff b/patches/elektra-0.7.0-r1618/elektra-0.7.0rc5-file-existence.diff deleted file mode 100644 index b6bb3cb..0000000 --- a/patches/elektra-0.7.0-r1618/elektra-0.7.0rc5-file-existence.diff +++ /dev/null @@ -1,26 +0,0 @@ -Subject: don't break build while cross compiling -From: Robert Schwebel <[email protected]> - -When cross compiling it may not really matter if we have the docbook xsl -stuff (only needed for documentation). So disable the check in that -case. - -Signed-off-by: Robert Schwebel <[email protected]> - ---- - configure.ac | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -Index: elektra-0.7.0-r1618/configure.ac -=================================================================== ---- elektra-0.7.0-r1618.orig/configure.ac -+++ elektra-0.7.0-r1618/configure.ac -@@ -301,7 +301,7 @@ PKG_PROG_PKG_CONFIG - # xsltproc - AC_PATH_PROG(xsltproc, xsltproc, "no") - # Check if have style-sheet too --if test "x$default_docbook" != "xno"; then -+if test "x$default_docbook" != "xno" && test "x$cross_compiling" = "xno"; then - AC_CHECK_FILE([$default_docbook/manpages/docbook.xsl], - [dbroot=$default_docbook], - [dbroot="no"]) diff --git a/patches/elektra-0.7.0-r1618/elektra-0.7.0rc5-libxml2.diff b/patches/elektra-0.7.0-r1618/elektra-0.7.0rc5-libxml2.diff deleted file mode 100644 index b5b3c61..0000000 --- a/patches/elektra-0.7.0-r1618/elektra-0.7.0rc5-libxml2.diff +++ /dev/null @@ -1,40 +0,0 @@ -Subject: [PATCH] use pkg-config for libxml2 detection -From: Robert Schwebel <[email protected]> - -When cross compiling, the current test incorrectly picks up the libxml2 -from the development host. Use pkg-config in order to do it right. - -Signed-off-by: Robert Schwebel <[email protected]> - ---- - configure.ac | 16 ++++++++++++---- - 1 file changed, 12 insertions(+), 4 deletions(-) - -Index: elektra-0.7.0-r1618/configure.ac -=================================================================== ---- elektra-0.7.0-r1618.orig/configure.ac -+++ elektra-0.7.0-r1618/configure.ac -@@ -435,11 +435,19 @@ fi - privatelibs="" - - # Check for libxml (Allow compilation of libelektratools) --AM_PATH_XML2(, [elektra_have_xml="yes"], [elektra_have_xml="no"]) --AM_CONDITIONAL(HAVE_XML, [test x$elektra_have_xml = xyes]) --if test "x$elektra_have_xml" = "xyes"; then -+REQUIRES_LIBXML2="libxml2 >= 2.6.0" -+AC_SUBST(REQUIRES_LIBXML2) -+PKG_CHECK_MODULES([libxml2], -+ [${REQUIRES_LIBXML2}], -+ [HAVE_XML=yes], -+ [HAVE_XML=no] -+) -+AC_SUBST(libxml2_CFLAGS) -+AC_SUBST(libxml2_LIBS) -+AM_CONDITIONAL([HAVE_XML],[test "$HAVE_XML" = "yes"]) -+if test $HAVE_XML; then - elektratools=libelektratools -- privatelibs=$privatelibs" -lxml2" -+ privatelibs=$privatelibs"$libxml2_LIBS" - fi - - AC_SUBST(elektratools) diff --git a/patches/elektra-0.7.0-r1618/elektra-0.7.0rc5-static-libs.diff b/patches/elektra-0.7.0-r1618/elektra-0.7.0rc5-static-libs.diff deleted file mode 100644 index 9a6b7b3..0000000 --- a/patches/elektra-0.7.0-r1618/elektra-0.7.0rc5-static-libs.diff +++ /dev/null @@ -1,105 +0,0 @@ -Subject: [PATCH] fix --enable-static -From: Robert Schwebel <[email protected]> - -Build static libs only when --enable-static was given. - -Signed-off-by: Robert Schwebel <[email protected]> - ---- - configure.ac | 12 +++++++----- - src/kdb/Makefile.am | 10 +++++++++- - src/preload/Makefile.am | 10 +++++++++- - 3 files changed, 25 insertions(+), 7 deletions(-) - -Index: elektra-0.7.0-r1618/configure.ac -=================================================================== ---- elektra-0.7.0-r1618.orig/configure.ac -+++ elektra-0.7.0-r1618/configure.ac -@@ -59,7 +59,7 @@ esac - # Disable libtool static lib - #AC_DISABLE_STATIC - -- -+AM_CONDITIONAL([ENABLE_STATIC],[test x$enable_static = xyes]) - - - -@@ -560,10 +560,12 @@ ALLOW_BACKEND(daemon, [test x$elektra_uc - - AC_SUBST(BACKENDS) - --backend_static_libs= --for backend in $BACKENDS; do -- backend_static_libs="$backend_static_libs ../backends/${backend}/libelektra-${backend}.a" --done -+if test x$enable_static = xyes; then -+ backend_static_libs= -+ for backend in $BACKENDS; do -+ backend_static_libs="$backend_static_libs ../backends/${backend}/libelektra-${backend}.a" -+ done -+fi - - AC_SUBST(privatelibs) - AC_SUBST(backend_static_libs) -Index: elektra-0.7.0-r1618/src/kdb/Makefile.am -=================================================================== ---- elektra-0.7.0-r1618.orig/src/kdb/Makefile.am -+++ elektra-0.7.0-r1618/src/kdb/Makefile.am -@@ -5,17 +5,25 @@ AM_CPPFLAGS = -I$(top_srcdir)/src/includ - - kdb_source = kdb-tool.c kdb-tool.h help.c BSDgetopt.c BSDgetopt.h ../include/kdb.h ../include/kdbloader.h ../include/kdbtools.h - --bin_PROGRAMS = kdb kdb_static -+if ENABLE_STATIC -+KDB_STATIC=kdb_static -+else -+KDB_STATIC= -+endif -+ -+bin_PROGRAMS = kdb $(KDB_STATIC) - kdb_SOURCES = $(kdb_source) - kdb_LDADD = ../libelektra/libelektra.la $(LIBLTDL) $(LIBICONV) - kdb_CFLAGS = $(COPTFLAGS) $(CDBGFLAGS) - -+if ENABLE_STATIC - kdb_static_SOURCES = $(kdb_source) - kdb_static_LDADD = $(privatelibs) ../libelektra/libelektra.a $(LIBICONV) - kdb_static_CFLAGS = -DELEKTRA_STATIC $(COPTFLAGS) $(CDBGFLAGS) - - ../libelektra/libelektra.a: - cd ../libelektra && $(MAKE) libelektra.a -+endif - - clean-local: - rm -f *.gcno *.gcda *.gcno -Index: elektra-0.7.0-r1618/src/preload/Makefile.am -=================================================================== ---- elektra-0.7.0-r1618.orig/src/preload/Makefile.am -+++ elektra-0.7.0-r1618/src/preload/Makefile.am -@@ -3,17 +3,25 @@ AM_CPPFLAGS = -DDATADIR=\"$(datadir)\" - - preload_source = preload.c ../include/kdb.h - --bin_PROGRAMS = preload preload_static -+if ENABLE_STATIC -+PRELOAD_STATIC=preload_static -+else -+PRELOAD_STATIC= -+endif -+ -+bin_PROGRAMS = preload $(PRELOAD_STATIC) - preload_SOURCES = $(preload_source) - preload_LDADD = ../libelektra/libelektra.la $(LIBLTDL) $(LIBICONV) - preload_CFLAGS = $(COPTFLAGS) $(CDBGFLAGS) - -+if ENABLE_STATIC - preload_static_SOURCES = $(preload_source) - preload_static_LDADD = $(privatelibs) ../libelektra/libelektra.a $(LIBICONV) - preload_static_CFLAGS = -DELEKTRA_STATIC $(COPTFLAGS) $(CDBGFLAGS) - - ../libelektra/libelektra.a: - cd ../libelektra && $(MAKE) libelektra.a -+endif - - clean-local: - rm -f *.gcno *.gcda *.gcno diff --git a/patches/elektra-0.7.0-r1618/series b/patches/elektra-0.7.0-r1618/series deleted file mode 100644 index e8f3fb1..0000000 --- a/patches/elektra-0.7.0-r1618/series +++ /dev/null @@ -1,4 +0,0 @@ -elektra-0.7.0rc5-file-existence.diff -elektra-0.7.0rc5-libxml2.diff -elektra-0.7.0rc5-static-libs.diff -elektra-0.7.0-r1618-ini-debug.diff diff --git a/rules/elektra.in b/rules/elektra.in deleted file mode 100644 index 7b4373f..0000000 --- a/rules/elektra.in +++ /dev/null @@ -1,110 +0,0 @@ -## SECTION=system_libraries -menuconfig ELEKTRA - tristate - depends on BROKEN - prompt "elektra " - select DB if ELEKTRA__BERKELEYDB - help - Elektra is a universal hierarchical configuration store, with related - goals like GConf and the Windows Registry. It allows programs to read - and save their configurations with a consistent API, and allows them to - be aware of other applications' configurations, leveraging easy - application integration. The whole point of it is to tie applications - together, so that they can co-operate and share their user-preferences. - -if ELEKTRA - -config ELEKTRA__DEBUG - bool - prompt "enable debug support" - help - This option enables debug support for libelektra. You get much more - output than with normal production systems when enabled. - -choice - prompt "default backend " - default ELEKTRA__DEFAULT_BACKEND_NONE - - config ELEKTRA__DEFAULT_BACKEND_NONE - bool - prompt "none " - - config ELEKTRA__DEFAULT_BACKEND_FILESYS - bool - depends on ELEKTRA__FILESYS - prompt "filesys " - - config ELEKTRA__DEFAULT_BACKEND_HOSTS - bool - depends on ELEKTRA__HOSTS - prompt "hosts " - - config ELEKTRA__DEFAULT_BACKEND_INI - bool - depends on ELEKTRA__INI - prompt "ini " - - config ELEKTRA__DEFAULT_BACKEND_BERKELEYDB - bool - depends on ELEKTRA__BERKELEYDB - prompt "berkeleydb" - - config ELEKTRA__DEFAULT_BACKEND_FSTAB - bool - depends on ELEKTRA__FSTAB - prompt "fstab " - - config ELEKTRA__DEFAULT_BACKEND_PASSWD - bool - depends on ELEKTRA__PASSWD - prompt "passwd " - - config ELEKTRA__DEFAULT_BACKEND_DAEMON - bool - depends on ELEKTRA__DAEMON - prompt "daemon " -endchoice - -menu "backends " - - config ELEKTRA__FILESYS - bool - prompt "filesys backend" - - config ELEKTRA__HOSTS - bool - prompt "hosts backend" - - config ELEKTRA__INI - bool - prompt "ini backend" - - config ELEKTRA__BERKELEYDB - bool - depends on BROKEN - prompt "berkeleydb backend" - - config ELEKTRA__FSTAB - bool - depends on BROKEN - prompt "fstab backend" - - config ELEKTRA__PASSWD - bool - prompt "passwd backend" - - config ELEKTRA__DAEMON - bool - prompt "daemon backend" - -endmenu - -menu "language bindings " - - config ELEKTRA__CPP - bool - prompt "c++ bindings" - -endmenu - -endif diff --git a/rules/elektra.make b/rules/elektra.make deleted file mode 100644 index b393917..0000000 --- a/rules/elektra.make +++ /dev/null @@ -1,271 +0,0 @@ -# -*-makefile-*- -# -# Copyright (C) 2008 by Robert Schwebel <[email protected]> -# -# See CREDITS for details about who has contributed to this project. -# -# For further information about the PTXdist project and license conditions -# see the README file. -# - -# -# We provide this package -# -PACKAGES-$(PTXCONF_ELEKTRA) += elektra - -# -# Paths and names -# -ELEKTRA_VERSION := 0.7.0-r1618 -ELEKTRA_MD5 := -ELEKTRA := elektra-$(ELEKTRA_VERSION) -ELEKTRA_SUFFIX := tar.gz -ELEKTRA_URL := http://www.markus-raab.org/ftp/$(ELEKTRA).$(ELEKTRA_SUFFIX) \ - http://www.pengutronix.de/software/ptxdist/temporary-src/$(ELEKTRA).$(ELEKTRA_SUFFIX) -ELEKTRA_SOURCE := $(SRCDIR)/$(ELEKTRA).$(ELEKTRA_SUFFIX) -ELEKTRA_DIR := $(BUILDDIR)/$(ELEKTRA) - -# ---------------------------------------------------------------------------- -# Get -# ---------------------------------------------------------------------------- - -$(ELEKTRA_SOURCE): - @$(call targetinfo) - @$(call get, ELEKTRA) - -# ---------------------------------------------------------------------------- -# Prepare -# ---------------------------------------------------------------------------- - -ELEKTRA_ENV := \ - $(CROSS_ENV) - -# -# FIXME: -# -# elektra does not try to link against libltdl if not built with -# --enable-ltdl-install. The right solution is probably to build an external -# libltdl and select it from kconfig. -# -# We install libltdl here, although it may collide with other packages. -# - -# -# autoconf -# -ELEKTRA_AUTOCONF := \ - $(CROSS_AUTOCONF_USR) \ - --disable-experimental \ - --disable-valgrind-tests \ - --disable-gcov \ - --enable-shared \ - --disable-static \ - --disable-fast-install \ - --without-libiconv-prefix \ - --disable-rpath \ - --disable-xmltest \ - --disable-gconf \ - --disable-python \ - --enable-ltdl-install - -ifdef PTXCONF_ELEKTRA__DEBUG -ELEKTRA_AUTOCONF += --enable-debug -else -#ELEKTRA_AUTOCONF += --disable-debug -endif - -ifdef PTXCONF_ICONV -ELEKTRA_AUTOCONF += --enable-iconv -else -ELEKTRA_AUTOCONF += --disable-iconv -endif - -# -# backends -# - -ifdef PTXCONF_ELEKTRA__FILESYS -ELEKTRA_AUTOCONF += --enable-filesys -else -ELEKTRA_AUTOCONF += --disable-filesys -endif -ifdef PTXCONF_ELEKTRA__HOSTS -ELEKTRA_AUTOCONF += --enable-hosts -else -ELEKTRA_AUTOCONF += --disable-hosts -endif -ifdef PTXCONF_ELEKTRA__INI -ELEKTRA_AUTOCONF += --enable-ini -else -ELEKTRA_AUTOCONF += --disable-ini -endif -ifdef PTXCONF_ELEKTRA__BERKELEYDB -ELEKTRA_AUTOCONF += --enable-berkeleydb -else -ELEKTRA_AUTOCONF += --disable-berkeleydb -endif -ifdef PTXCONF_ELEKTRA__FSTAB -ELEKTRA_AUTOCONF += --enable-fstab -else -ELEKTRA_AUTOCONF += --disable-fstab -endif -ifdef PTXCONF_ELEKTRA__PASSWD -ELEKTRA_AUTOCONF += --enable-passwd -else -ELEKTRA_AUTOCONF += --disable-passwd -endif -ifdef PTXCONF_ELEKTRA__DAEMON -ELEKTRA_AUTOCONF += --enable-daemon -else -ELEKTRA_AUTOCONF += --disable-daemon -endif -ifdef PTXCONF_ELEKTRA__CPP -ELEKTRA_AUTOCONF += --enable-cpp -else -ELEKTRA_AUTOCONF += --disable-cpp -endif - -# --with-ulibdir=ULIBDIR> Set the path for usr lib. -# --with-backenddir=<path where backend libraries are> -# Set the path for backend libraries. -# [LIBDIR/elektra@] -# --with-hlvl-backenddir=<path where high level backend libraries are> -# Set the path for high level backend libraries. -# [ULIBDIR/elektra] -# --with-docdir=<path where doc will be installed> -# Set the path for documentation. -# [DATADIR/doc/elektra] -# --with-develdocdir=<path where elektra-api doc will be installed> -# Set the path for elektra api documentation. -# [DATADIR/doc/elektra-devel] -# --with-docbook=<path to docbook.xsl> -# Set path to docbook.xsl used for generate manpage. -# [/usr/share/sgml/docbook/xsl-stylesheets] -# --with-kdbschemadir=<relative path to kdb schema> -# Set the path for elektra.xsd. DATADIR will be -# prefixed. [/sgml/elektra-$PACKAGE_VERSION] -# --with-default-backend=<backend> -# Set backend elektra will be linked to. [filesys] -# --with-default-dbackend=<daemon backend> -# Set the default backend for the kdbd daemon to use. -# [berkeleydb] -# --with-xml-prefix=PFX Prefix where libxml is installed (optional) -# --with-xml-exec-prefix=PFX Exec prefix where libxml is installed (optional) - -# ---------------------------------------------------------------------------- -# Compile -# ---------------------------------------------------------------------------- - -$(STATEDIR)/elektra.compile: - @$(call targetinfo) - cd $(ELEKTRA_DIR) && \ - $(ELEKTRA_PATH) $(MAKE) $(PARALLELMFLAGS) - cd $(ELEKTRA_DIR)/examples && \ - $(ELEKTRA_PATH) $(MAKE) check $(PARALLELMFLAGS) - @$(call touch) - -# ---------------------------------------------------------------------------- -# Target-Install -# ---------------------------------------------------------------------------- - -$(STATEDIR)/elektra.targetinstall: - @$(call targetinfo) - - @$(call install_init, elektra) - @$(call install_fixup, elektra,PRIORITY,optional) - @$(call install_fixup, elektra,SECTION,base) - @$(call install_fixup, elektra,AUTHOR,"Robert Schwebel <[email protected]> <[email protected]>") - @$(call install_fixup, elektra,DESCRIPTION,missing) - - @$(call install_copy, elektra, 0, 0, 0755, $(ELEKTRA_DIR)/src/kdb/kdb, /usr/bin/kdb) - @$(call install_copy, elektra, 0, 0, 0755, $(ELEKTRA_DIR)/src/preload/preload, /usr/bin/preload) - - @$(call install_lib, elektra, 0, 0, 0644, libelektra) - -# FIXME: libelektratools is only available if we have xml support -# @$(call install_lib, elektra, 0, 0, 0644, libelektratools) - -ifdef PTXCONF_ELEKTRA__CPP - @$(call install_lib, elektra, 0, 0, 0644, libelektra-cpp) -endif -ifdef PTXCONF_ELEKTRA__FILESYS - @$(call install_copy, elektra, 0, 0, 0644, \ - $(ELEKTRA_DIR)/src/backends/filesys/.libs/libelektra-filesys.so, \ - /usr/lib/elektra/libelektra-filesys.so) -endif -ifdef PTXCONF_ELEKTRA__HOSTS - @$(call install_copy, elektra, 0, 0, 0644, \ - $(ELEKTRA_DIR)/src/backends/hosts/.libs/libelektra-hosts.so, \ - /usr/lib/elektra/libelektra-hosts.so) -endif -ifdef PTXCONF_ELEKTRA__INI - @$(call install_copy, elektra, 0, 0, 0644, \ - $(ELEKTRA_DIR)/src/backends/ini/.libs/libelektra-ini.so, \ - /usr/lib/elektra/libelektra-ini.so) -endif -ifdef PTXCONF_ELEKTRA__BERKELEYDB - @$(call install_copy, elektra, 0, 0, 0644, \ - $(ELEKTRA_DIR)/src/backends/berkeleydb/.libs/libelektra-berkeleydb.so, \ - /usr/lib/elektra/libelektra-berkeleydb.so) -endif -ifdef PTXCONF_ELEKTRA__FSTAB - @$(call install_copy, elektra, 0, 0, 0644, \ - $(ELEKTRA_DIR)/src/backends/fstab/.libs/libelektra-fstab.so, \ - /usr/lib/elektra/libelektra-fstab.so) -endif -ifdef PTXCONF_ELEKTRA__PASSWD - @$(call install_copy, elektra, 0, 0, 0644, \ - $(ELEKTRA_DIR)/src/backends/passwd/.libs/libelektra-passwd.so, \ - /usr/lib/elektra/libelektra-passwd.so) -endif -ifdef PTXCONF_ELEKTRA__DAEMON - @$(call install_copy, elektra, 0, 0, 0644, \ - $(ELEKTRA_DIR)/src/backends/daemon/.libs/libelektra-daemon.so, \ - /usr/lib/elektra/libelektra-daemon.so) - @$(call install_copy, elektra, 0, 0, 0755, $(ELEKTRA_DIR)/src/backends/daemon/kdbd, /usr/sbin/kdbd) -endif - - # make link for default backend -ifdef PTXCONF_ELEKTRA__DEFAULT_BACKEND_FILESYS - @$(call install_link, elektra, \ - libelektra-filesys.so, \ - /usr/lib/elektra/libelektra-default.so) -endif -ifdef PTXCONF_ELEKTRA__DEFAULT_BACKEND_HOSTS - @$(call install_link, elektra, \ - libelektra-hosts.so, \ - /usr/lib/elektra/libelektra-default.so) -endif -ifdef PTXCONF_ELEKTRA__DEFAULT_BACKEND_INI - @$(call install_link, elektra, \ - libelektra-ini.so, \ - /usr/lib/elektra/libelektra-default.so) -endif -ifdef PTXCONF_ELEKTRA__DEFAULT_BACKEND_BERKELEYDB - @$(call install_link, elektra, \ - libelektra-berkeleydb.so, \ - /usr/lib/elektra/libelektra-default.so) -endif -ifdef PTXCONF_ELEKTRA__DEFAULT_BACKEND_FSTAB - @$(call install_link, elektra, \ - libelektra-fstab.so, \ - /usr/lib/elektra/libelektra-default.so) -endif -ifdef PTXCONF_ELEKTRA__DEFAULT_BACKEND_PASSWD - @$(call install_link, elektra, \ - libelektra-passwd.so, \ - /usr/lib/elektra/libelektra-default.so) -endif -ifdef PTXCONF_ELEKTRA__DEFAULT_BACKEND_DAEMON - @$(call install_link, elektra, \ - libelektra-daemon.so, \ - /usr/lib/elektra/libelektra-default.so) -endif - # FIXME: see note above - @$(call install_lib, elektra, 0, 0, 0644, libltdl) - - @$(call install_finish, elektra) - - @$(call touch) - -# vim: syntax=make -- 1.7.7 -- ptxdist mailing list [email protected]
