This patch adds two options:
1) U_BOOT_INSTALL_MLO copies the "MLO" (u-boot SPL which replaces
x-loader for OMAP CPUs) to the images directory.
2) U_BOOT_INSTALL_U_BOOT_IMG copies "u-boot.img" in addition to the
u-boot binary because u-boot SPL expects the u-boot.img (which
contains an additional u-boot header) on a SD card.
Because of the file name conflict, U_BOOT_INSTALL_MLO is only selectable
when x-loader is not built.
Signed-off-by: Bernhard Walle <[email protected]>
---
platforms/u-boot.in | 19 +++++++++++++++++++
rules/u-boot.make | 6 ++++++
2 files changed, 25 insertions(+), 0 deletions(-)
diff --git a/platforms/u-boot.in b/platforms/u-boot.in
index 86f0703..1cac07b 100644
--- a/platforms/u-boot.in
+++ b/platforms/u-boot.in
@@ -60,5 +60,24 @@ config U_BOOT_INSTALL_ELF
help
Installing the U-Boot ELF binary into platform image directory.
+config U_BOOT_INSTALL_MLO
+ prompt "install MLO"
+ bool
+ depends on !X_LOAD
+ help
+ Installing the U-Boot SPL ("MLO") binary needed for OMAP CPUs into
platform
+ image directory.
+
+if U_BOOT_INSTALL_MLO
+
+config U_BOOT_INSTALL_U_BOOT_IMG
+ prompt "install u-boot.img"
+ bool
+ help
+ Installing the u-boot image with header ("u-boot.img") which is
executed
+ by u-boot SPL ("MLO") into platform image directory.
+
+endif
+
endif
diff --git a/rules/u-boot.make b/rules/u-boot.make
index bee7faf..36760ee 100644
--- a/rules/u-boot.make
+++ b/rules/u-boot.make
@@ -70,6 +70,12 @@ endif
ifdef PTXCONF_U_BOOT_INSTALL_ELF
@install -D -m644 $(U_BOOT_DIR)/u-boot $(IMAGEDIR)/u-boot.elf
endif
+ifdef PTXCONF_U_BOOT_INSTALL_MLO
+ @install -D -m644 $(U_BOOT_DIR)/MLO $(IMAGEDIR)/MLO
+endif
+ifdef PTXCONF_U_BOOT_INSTALL_U_BOOT_IMG
+ @install -D -m644 $(U_BOOT_DIR)/u-boot.img $(IMAGEDIR)/u-boot.img
+endif
@$(call touch)
# ----------------------------------------------------------------------------
--
1.7.9
--
ptxdist mailing list
[email protected]
