On Thu, Feb 23, 2012 at 05:40:51PM +0100, Jan Weitzel wrote:
> Build MLO in $(BUILDDIR)/barebox_mlo-* with config PTXCONF_BAREBOX_MLO_CONFIG
> Default config is barebox_mlo.config.
Applied.
I did some more modifications in another commit. Please check that it still
works for you.
Michael
> Signed-off-by: Jan Weitzel <j.weit...@phytec.de>
> ---
> platforms/barebox_mlo.in | 19 ++++++++++
> rules/barebox_mlo.make | 88
> ++++++++++++++++++++++++++++++++++++++++++++++
> 2 files changed, 107 insertions(+), 0 deletions(-)
> create mode 100644 platforms/barebox_mlo.in
> create mode 100644 rules/barebox_mlo.make
>
> diff --git a/platforms/barebox_mlo.in b/platforms/barebox_mlo.in
> new file mode 100644
> index 0000000..f1e9c78
> --- /dev/null
> +++ b/platforms/barebox_mlo.in
> @@ -0,0 +1,19 @@
> +## SECTION=bootloader
> +
> +menuconfig BAREBOX_MLO
> + prompt "barebox mlo "
> + bool
> + depends on BAREBOX
> + help
> + Build mlo from barebox sources.
> +
> +if BAREBOX_MLO
> +
> +config BAREBOX_MLO_CONFIG
> + prompt "mlo config file"
> + string
> + default "barebox_mlo.config"
> + help
> + This entry specifies the .config file used to compile mlo.
> +
> +endif
> diff --git a/rules/barebox_mlo.make b/rules/barebox_mlo.make
> new file mode 100644
> index 0000000..0efab3b
> --- /dev/null
> +++ b/rules/barebox_mlo.make
> @@ -0,0 +1,88 @@
> +# -*-makefile-*-
> +#
> +# Copyright (C) 2012 Jan Weitzel <j.weit...@phytec.de>
> +#
> +# See CREDITS for details about who has contributed to this project.
> +#
> +# For further information about the PTXdist project and license conditions
> +# see the README file.
> +#
> +
> +#
> +# We provide this package
> +#
> +PACKAGES-$(PTXCONF_BAREBOX_MLO) += barebox_mlo
> +
> +#
> +# Paths and names
> +#
> +BAREBOX_MLO_VERSION = $(BAREBOX_VERSION)
> +BAREBOX_MLO_MD5 = $(BAREBOX_MD5)
> +BAREBOX_MLO = $(BAREBOX)
> +BAREBOX_MLO_DIR = $(BUILDDIR)/barebox_mlo-$(BAREBOX_MLO_VERSION)
> +BAREBOX_MLO_SOURCE = $(BAREBOX_SOURCE)
> +BAREBOX_MLO_LICENSE := GPLv2
> +
> +BAREBOX_MLO_CONFIG := $(call remove_quotes, \
> + $(PTXDIST_PLATFORMCONFIGDIR)/$(PTXCONF_BAREBOX_MLO_CONFIG))
> +
> +#
> ----------------------------------------------------------------------------
> +# Prepare
> +#
> ----------------------------------------------------------------------------
> +BAREBOX_MLO_CONF_ENV := KCONFIG_NOTIMESTAMP=1
> +BAREBOX_MLO_CONF_TOOL := kconfig
> +BAREBOX_MLO_CONF_OPT := \
> + HOSTCC=$(HOSTCC) \
> + ARCH=$(PTXCONF_BAREBOX_ARCH_STRING) \
> + CROSS_COMPILE=$(BOOTLOADER_CROSS_COMPILE)
> +
> +BAREBOX_MLO_MAKE_OPT := $(BAREBOX_MLO_CONF_OPT)
> +
> +#
> ----------------------------------------------------------------------------
> +# Install
> +#
> ----------------------------------------------------------------------------
> +
> +$(STATEDIR)/barebox_mlo.install:
> + @$(call targetinfo)
> + @$(call touch)
> +
> +#
> ----------------------------------------------------------------------------
> +# Target-Install
> +#
> ----------------------------------------------------------------------------
> +
> +$(STATEDIR)/barebox_mlo.targetinstall:
> + @$(call targetinfo)
> +# #barebox renamed barebox.bin.ift to MLO, so fall back to barebox.bin.ift
> + @ptxd_get_path "$(BAREBOX_MLO_DIR)/MLO" \
> + "$(BAREBOX_MLO_DIR)/barebox.bin.ift" && \
> + install -D -m644 "$${ptxd_reply}" "$(IMAGEDIR)/MLO"
> +
> + @$(call touch)
> +
> +#
> ----------------------------------------------------------------------------
> +# Clean
> +#
> ----------------------------------------------------------------------------
> +
> +$(STATEDIR)/barebox_mlo.clean:
> + @$(call targetinfo)
> + @$(call clean_pkg, BAREBOX_MLO)
> + rm -rf $(IMAGEDIR)/MLO
> +
> +#
> ----------------------------------------------------------------------------
> +# oldconfig / menuconfig
> +#
> ----------------------------------------------------------------------------
> +
> +barebox_mlo_oldconfig barebox_mlo_menuconfig: $(STATEDIR)/barebox_mlo.extract
> + @if test -e $(BAREBOX_MLO_CONFIG); then \
> + cp $(BAREBOX_MLO_CONFIG) $(BAREBOX_MLO_DIR)/.config; \
> + fi
> + cd $(BAREBOX_MLO_DIR) && \
> + $(BAREBOX_MLO_PATH) $(BAREBOX_MLO_ENV) $(MAKE) \
> + $(BAREBOX_MLO_MAKEVARS) $(subst barebox_mlo_,,$@)
> + @if cmp -s $(BAREBOX_MLO_DIR)/.config $(BAREBOX_MLO_CONFIG); then \
> + echo "barebox_mlo configuration unchanged"; \
> + else \
> + cp $(BAREBOX_MLO_DIR)/.config $(BAREBOX_MLO_CONFIG); \
> + fi
> +
> +# vim: syntax=make
> --
> 1.7.0.4
>
>
> --
> ptxdist mailing list
> ptxdist@pengutronix.de
>
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
--
ptxdist mailing list
ptxdist@pengutronix.de
