Signed-off-by: Juergen Beisert <[email protected]> --- generic/etc/ices.conf | 78 +++++++++++++++++++++++++++++++++++++++++++++++++ rules/ices.in | 33 +++++++++++++++++++++ rules/ices.make | 71 ++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 182 insertions(+) create mode 100644 generic/etc/ices.conf create mode 100644 rules/ices.in create mode 100644 rules/ices.make
diff --git a/generic/etc/ices.conf b/generic/etc/ices.conf new file mode 100644 index 0000000..b58f71a --- /dev/null +++ b/generic/etc/ices.conf @@ -0,0 +1,78 @@ +<?xml version="1.0"?> +<ices:Configuration xmlns:ices="http://www.icecast.org/projects/ices";> + <Playlist> + <!-- This is the filename used as a playlist when using the builtin + playlist handler. --> + <File>playlist.txt</File> + <!-- Set this to 0 if you don't want to randomize your playlist, and to + 1 if you do. --> + <Randomize>1</Randomize> + <!-- One of builtin, perl, or python. --> + <Type>builtin</Type> + <!-- Module name to pass to the playlist handler if using perl or python. + If you use the builtin playlist handler then this is ignored --> + <Module>ices</Module> + <!-- Set this to the number of seconds to crossfade between tracks. + Leave out or set to zero to disable crossfading (the default). + <Crossfade>5</Crossfade> + --> + </Playlist> + + <Execution> + <!-- Set this to 1 if you want ices to launch in the background as a + daemon --> + <Background>0</Background> + <!-- Set this to 1 if you want to see more verbose output from ices --> + <Verbose>0</Verbose> + <!-- This directory specifies where ices should put the logfile, cue file + and pid file (if daemonizing). Don't use /tmp if you have l33t h4x0rz + on your server. --> + <BaseDirectory>/tmp</BaseDirectory> + </Execution> + + <Stream> + <Server> + <!-- Hostname or ip of the icecast server you want to connect to --> + <Hostname>localhost</Hostname> + <!-- Port of the same --> + <Port>8000</Port> + <!-- Encoder password on the icecast server --> + <Password>letmein</Password> + <!-- Header protocol to use when communicating with the server. + Shoutcast servers need "icy", icecast 1.x needs "xaudiocast", and + icecast 2.x needs "http". --> + <Protocol>http</Protocol> + </Server> + + <!-- The name of the mountpoint on the icecast server --> + <Mountpoint>/ices</Mountpoint> + <!-- The name of the dumpfile on the server for your stream. DO NOT set + this unless you know what you're doing. + <Dumpfile>ices.dump</Dumpfile> + --> + <!-- The name of you stream, not the name of the song! --> + <Name>Default stream</Name> + <!-- Genre of your stream, be it rock or pop or whatever --> + <Genre>Default genre</Genre> + <!-- Longer description of your stream --> + <Description>Default description</Description> + <!-- URL to a page describing your stream --> + <URL>http://localhost/</URL> + <!-- 0 if you don't want the icecast server to publish your stream on + the yp server, 1 if you do --> + <Public>0</Public> + + <!-- Stream bitrate, used to specify bitrate if reencoding, otherwise + just used for display on YP and on the server. Try to keep it + accurate --> + <Bitrate>128</Bitrate> + <!-- If this is set to 1, and ices is compiled with liblame support, + ices will reencode the stream on the fly to the stream bitrate. --> + <Reencode>0</Reencode> + <!-- Number of channels to reencode to, 1 for mono or 2 for stereo --> + <!-- Sampe rate to reencode to in Hz. Leave out for LAME's best choice + <Samplerate>44100</Samplerate> + --> + <Channels>2</Channels> + </Stream> +</ices:Configuration> diff --git a/rules/ices.in b/rules/ices.in new file mode 100644 index 0000000..966fe6c --- /dev/null +++ b/rules/ices.in @@ -0,0 +1,33 @@ +## SECTION=applications + +menuconfig ICES + tristate + prompt "ices " + select LIBVORBIS if ICES_VORBIS + select LIBXML2 + select PYTHON if ICES_PYTHON + select LAME if ICES_LAME + help + Ices is a tool sending an MP3 stream to an icecast server + +if ICES + +config ICES_VORBIS + bool + prompt "support VORBIS" + help + Enable support for VORBIS data format + +config ICES_PYTHON + bool + prompt "enable python support" + help + Enable python based scripting support + +config ICES_LAME + bool + prompt "enable lame support" + help + Enable MP3 lame support + +endif diff --git a/rules/ices.make b/rules/ices.make new file mode 100644 index 0000000..a5687ae --- /dev/null +++ b/rules/ices.make @@ -0,0 +1,71 @@ +# -*-makefile-*- +# +# Copyright (C) 2012 by Juergen Beisert <[email protected]> +# +# See CREDITS for details about who has contributed to this project. +# +# For further information about the PTXdist project and license conditions +# see the README file. +# + +# +# We provide this package +# +PACKAGES-$(PTXCONF_ICES) += ices + +# +# Paths and names +# +ICES_VERSION := 0.4 +ICES_MD5 := d31450c4011561dae0229f071cb41cb6 +ICES := ices-$(ICES_VERSION) +ICES_SUFFIX := tar.gz +ICES_URL := http://downloads.us.xiph.org/releases/ices/$(ICES).$(ICES_SUFFIX) +ICES_SOURCE := $(SRCDIR)/$(ICES).$(ICES_SUFFIX) +ICES_DIR := $(BUILDDIR)/$(ICES) +ICES_LICENSE := GPLv2 + +# ---------------------------------------------------------------------------- +# Prepare +# ---------------------------------------------------------------------------- + +# +# autoconf +# +ICES_CONF_TOOL := autoconf +ICES_CONF_OPT := \ + $(CROSS_AUTOCONF_USR) \ + --enable-shared \ + --disable-static \ + --$(call ptx/wwo,PTXCONF_ICES_PYTHON)-python \ + --without-perl \ + --$(call ptx/wwo,PTXCONF_ICES_LAME)-lame \ + --$(call ptx/wwo,PTXCONF_ICES_VORBIS)-vorbis \ + --without-faad \ + --without-flac + +# ---------------------------------------------------------------------------- +# Target-Install +# ---------------------------------------------------------------------------- + +$(STATEDIR)/ices.targetinstall: + @$(call targetinfo) + + @$(call install_init, ices) + @$(call install_fixup, ices,PRIORITY,optional) + @$(call install_fixup, ices,SECTION,base) + @$(call install_fixup, ices,AUTHOR,"Juergen Beisert <[email protected]>") + @$(call install_fixup, ices,DESCRIPTION,missing) + + @$(call install_alternative, ices, 0, 0, 0644, /etc/ices.conf) +ifdef PTXCONF_ICES_PYTHON + @$(call install_copy, ices, 0, 0, 0755, /etc/modules) + @$(call install_copy, ices, 0, 0, 0755, -, /etc/modules/ices.py.dist) +endif + @$(call install_copy, ices, 0, 0, 0755, -, /usr/bin/ices) + + @$(call install_finish, ices) + + @$(call touch) + +# vim: syntax=make -- 1.7.9.5 -- ptxdist mailing list [email protected]
