From: "Bart vdr. Meulen" <[email protected]>

Add ebtables, an administration tool for ethernet frame filtering

Signed-off-by: Bart vdr. Meulen <[email protected]>
---
 rules/ebtables.in   |   40 +++++++++++++++++++++
 rules/ebtables.make |   98 +++++++++++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 138 insertions(+)
 create mode 100644 rules/ebtables.in
 create mode 100644 rules/ebtables.make

diff --git a/rules/ebtables.in b/rules/ebtables.in
new file mode 100644
index 0000000..d6ca932
--- /dev/null
+++ b/rules/ebtables.in
@@ -0,0 +1,40 @@
+## SECTION=networking
+
+menuconfig EBTABLES
+       tristate
+       prompt "ebtables"
+       select KERNEL_HEADER
+       help
+         Ethernet bridge frame table administration
+         Ebtables is used to set up, maintain, and inspect the tables of
+         Ethernet frame rules in the Linux kernel. It is analogous to iptables,
+         but operates at the MAC layer rather than the IP layer.
+
+if EBTABLES
+
+config EBTABLES_INSTALL_TOOLS
+       bool
+
+config EBTABLES_INSTALL_EBTABLES
+       bool "install ebtables"
+       select EBTABLES_INSTALL_TOOLS
+       help
+         install the ebtables command
+
+config EBTABLES_INSTALL_EBTABLES_RESTORE
+       bool "install ebtables-restore"
+       select EBTABLES_INSTALL_TOOLS
+       help
+         The ebtables-restore command is used to restore
+         the ebtables rule-set that was saved with the
+         ebtables-save command.
+
+config EBTABLES_INSTALL_EBTABLES_SAVE
+       bool "install ebtables-save"
+       select EBTABLES_INSTALL_TOOLS
+       help
+         The ebtables-save command is a tool to save
+         the current rule-set into a file that
+         ebtables-restore can use.
+
+endif
diff --git a/rules/ebtables.make b/rules/ebtables.make
new file mode 100644
index 0000000..cfaff7d
--- /dev/null
+++ b/rules/ebtables.make
@@ -0,0 +1,98 @@
+# -*-makefile-*-
+#
+# Copyright (C) 2011 by Bart vdr. Meulen <[email protected]>
+#
+# See CREDITS for details about who has contributed to this project.
+#
+# For further information about the PTXdist project and license conditions
+# see the README file.
+#
+
+#
+# We provide this package
+#
+PACKAGES-$(PTXCONF_EBTABLES) += ebtables
+
+#
+# Paths and names
+#
+EBTABLES_VERSION       := 2.0.10-1
+EBTABLES_MD5           := 33b9ff7c9b605605c705418f17812714
+EBTABLES               := ebtables-v$(EBTABLES_VERSION)
+EBTABLES_SUFFIX        := tar.gz
+EBTABLES_URL           := 
$(PTXCONF_SETUP_SFMIRROR)/ebtables/ebtables/ebtables-2-0-10-1/$(EBTABLES).$(EBTABLES_SUFFIX)
+EBTABLES_SOURCE        := $(SRCDIR)/$(EBTABLES).$(EBTABLES_SUFFIX)
+EBTABLES_DIR           := $(BUILDDIR)/$(EBTABLES)
+EBTABLES_LICENSE       := GPLv2
+
+# ----------------------------------------------------------------------------
+# Get
+# ----------------------------------------------------------------------------
+
+$(EBTABLES_SOURCE):
+       @$(call targetinfo)
+       @$(call get, EBTABLES)
+
+# ----------------------------------------------------------------------------
+# Prepare
+# ----------------------------------------------------------------------------
+
+EBTABLES_CONF_TOOL     := NO
+EBTABLES_MAKE_OPT := \
+       $(CROSS_ENV_CFLAGS) \
+       $(CROSS_ENV_CPPFLAGS) \
+       $(CROSS_ENV_LDFLAGS) \
+       $(CROSS_ENV_CC) \
+       KERNEL_INCLUDES=$(KERNEL_HEADERS_DIR)/include
+EBTABLES_INSTALL_OPT := \
+       BINDIR=/usr/sbin install
+
+# ----------------------------------------------------------------------------
+# Target-Install
+# ----------------------------------------------------------------------------
+
+$(STATEDIR)/ebtables.targetinstall:
+       @$(call targetinfo)
+
+       @$(call install_init, ebtables)
+       @$(call install_fixup, ebtables,PRIORITY,optional)
+       @$(call install_fixup, ebtables,SECTION,base)
+       @$(call install_fixup, ebtables,AUTHOR,"Bart vdr. Meulen 
<[email protected]>")
+       @$(call install_fixup, ebtables,DESCRIPTION,missing)
+
+ifdef PTXCONF_EBTABLES_INSTALL_EBTABLES
+       @$(call install_copy, ebtables, 0, 0, 0755, -, \
+               /usr/sbin/ebtables)
+endif
+
+ifdef PTXCONF_EBTABLES_INSTALL_EBTABLES_SAVE
+       @$(call install_copy, ebtables, 0, 0, 0755, -, \
+               /usr/sbin/ebtables-save)
+endif
+
+ifdef PTXCONF_EBTABLES_INSTALL_EBTABLES_RESTORE
+       @$(call install_copy, ebtables, 0, 0, 0755, -, \
+               /usr/sbin/ebtables-restore)
+endif
+
+ifdef  PTXCONF_EBTABLES_INSTALL_TOOLS
+       @$(call install_copy, ebtables, 0, 0, 0644, -, \
+               /etc/ethertypes)
+       @$(call install_tree, ebtables, 0, 0, \
+               $(EBTABLES_PKGDIR)/usr/lib, \
+               /usr/lib)
+endif
+
+       @$(call install_finish, ebtables)
+
+       @$(call touch)
+
+# ----------------------------------------------------------------------------
+# Clean
+# ----------------------------------------------------------------------------
+
+#$(STATEDIR)/ebtables.clean:
+#      @$(call targetinfo)
+#      @$(call clean_pkg, EBTABLES)
+
+# vim: syntax=make
-- 
1.7.9.5


-- 
ptxdist mailing list
[email protected]

Reply via email to