On Sun, Jun 10, 2012 at 05:05:32PM +0200, Bernhard Walle wrote:
> This patch should solve the problem that binaries in
> $PTXDIST_SYSROOT_HOST/bin must be able to find their libraries in
> $PTXDIST_SYSROOT_HOST/lib. On ELF systems that problem is solved
> by using rpath. However, rpath doesn't exist (works different) on
> Darwin that uses the Mach-O binary format.
> 
> After copying the files to $PTXDIST_SYSROOT_HOST, we do following:
> 
>  - For every library (lib/*.*.dylib), we change the install name
>    from /lib/libfoo.x.dylib to $PTXDIST_SYSROOT_HOST/lib/libfoo.x.dylib.
>    That way programs linked against that library can be executed
>    immediately, even in the build directory before installation
>    to $PTXDIST_SYSROOT_HOST.
> 
>    That's the call of "install_name_tool -id".
> 
>  - For every library (lib/*.*.dylib) and executable (bin/*), we
>    change the install name of dependent libraries to point to
>    $PTXDIST_SYSROOT_HOST/lib. The call of "otool -L" lists the
>    dependent libraries (like "readelf -d" on ELF systems) and
>    the call "install_name_tool -change" changes it. That step
>    is necessary because multiple libraries and binaries can be
>    built and installed at the same time, so the binary is already
>    built before "install_name_tool -id" is invoked.
> 
> That way I'm finally able to build host-qemu with host-glib and
> host-gettext-dummy (that provides -lintl which host-glib uses).
> 
> Signed-off-by: Bernhard Walle <[email protected]>
> ---
>  scripts/lib/ptxd_make_world_install.sh             |    5 ++
>  .../lib/ptxd_make_world_install_library_path.sh    |   92 
> ++++++++++++++++++++
>  2 Dateien geändert, 97 Zeilen hinzugefügt(+)
>  create mode 100644 scripts/lib/ptxd_make_world_install_library_path.sh
> 
> diff --git a/scripts/lib/ptxd_make_world_install.sh 
> b/scripts/lib/ptxd_make_world_install.sh
> index 3d5d5e5..e0418dc 100644
> --- a/scripts/lib/ptxd_make_world_install.sh
> +++ b/scripts/lib/ptxd_make_world_install.sh
> @@ -175,5 +175,10 @@ ptxd_make_world_install_post() {
>      done &&
>  
>      cp -dprf -- "${pkg_pkg_dir}"/* "${pkg_sysroot_dir}"
> +
> +    # only for host packages
> +    if [ "${pkg_sysroot_dir}" = "${PTXDIST_SYSROOT_HOST}" ] ; then
> +     ptxd_make_world_install_library_path "${pkg_pkg_dir}"
> +    fi

    if [ "${pkg_type}" != "target" ]; then
        ptxd_make_world_install_library_path
    fi

for cross packages too, and use pkg_pkg_dir directly below.

>  }
>  export -f ptxd_make_world_install_post
> diff --git a/scripts/lib/ptxd_make_world_install_library_path.sh 
> b/scripts/lib/ptxd_make_world_install_library_path.sh
> new file mode 100644
> index 0000000..32b4b45
> --- /dev/null
> +++ b/scripts/lib/ptxd_make_world_install_library_path.sh
> @@ -0,0 +1,92 @@
> +#!/bin/bash
> +#
> +# (c) 2012 Bernhard Walle <[email protected]>
> +#
> +
> +# This function is Darwin (Mac OS) specific. Helper function for
> +# ptxd_make_world_install_library_path.
> +#
> +# It should be invoked on one binary in ptxdist platform-*/sysroot-host (both
> +# for executables and libraries after installation. For binaries and 
> libraries,
> +# edits the dependent shared library install name to point to 
> sysroot-host/lib.
> +# For libraries only it changes also the install name (-id). That way the
> +# binaries linked against a library in sysroot-target/lib can be executed
> +# directly without setting environment variables.
> +#
> +# Arguments: $1 - the binary
> +ptxd_make_world_install_library_path_one()
> +{
> +    local binary="$1"
> +    local filename installfile
> +
> +    if ! [ -r "${binary}" ] ; then
> +     return
> +    fi

this was already checked, right?

> +
> +    for used_library in $(otool -LX "${binary}" | awk '{print $1}') ; do
> +     filename=${used_library##*/}  # basename

filename="$(basename "${used_library}")"

> +
> +     # if the library exists in sysroot-host, we use that one
> +     # using @executable_path even keeps the tree relocatable.
> +     installfile="${PTXDIST_SYSROOT_HOST}/lib/${filename}"
> +     if [ -r "${installfile}" ] ; then
> +         install_name_tool -change \
> +             "${used_library}" "${installfile}" \
> +             "${binary}"
> +     fi
> +
> +     # if it's a library, change also the ID so that binaries
> +     # that link against the binary get it right in the first
> +     # place (so they can get executed before installation)
> +     if [[ ${installfile} == *.dylib ]] ; then
> +         install_name_tool -id "${binary}" "${binary}"
> +     fi
> +    done
> +}
> +export -f ptxd_make_world_install_library_path_one
> +
> +# This function is Darwin (Mac OS) specific. It does nothing on other
> +# operating systems.
> +#
> +# The function gets invoked in install.post stage after the binaries
> +# have been copied from the package dir to the sysroot-host directory.
> +# The function must be called with the package directory as argument.
> +# For every binary (library and executable) in that package directory
> +# it translates the path to the correspondent path after copying
> +# to the sysroot-host and invokes ptxd_make_world_install_library_path_one
> +# which finally edits the install path of libaries/executables.
> +#
> +# Arguments: $1 - pkgdir of a package
> +ptxd_make_world_install_library_path()
> +{
> +    if [ "$(uname -s)" != Darwin ] ; then
> +     return
> +    fi
> +
> +    local pkgdir="$1"

use pkg_pkg_dir directly everywhere

> +    local file
> +    local installed_file
> +
> +    echo "install.post: Fixup library paths"
> +    for file in ${pkgdir}/bin/* ${pkgdir}/lib/*.*.dylib ; do
> +
> +     # for unexpanded wildcards
> +     if ! [ -r "${file}" ] ; then
> +         continue
> +     fi

use "find "${pkgdir}" -type f" and 
file "${file}" | grep -q 'dynamically linked' || continue

or something like that. Otherwise you might miss something.

> +
> +     installed_file=$(echo $file | sed -e 
> "s@${pkgdir}@${PTXDIST_SYSROOT_HOST}@g")

use ${pkg_sysroot_dir} (works for cross too)

> +
> +     # sanity check
> +     if ! [ -r "${installed_file}" ] ; then
> +         echo >&2 "File '${file}' exists but '${installed_file}' does not 
> after coping???"
> +         continue
> +     fi

imho not needed. The files where copied just before calling this.

> +
> +     echo "${installed_file}"

remove.

Michael

> +     ptxd_make_world_install_library_path_one "${installed_file}"
> +    done
> +
> +    echo "install.post: Fixup library paths: done"
> +}
> +export -f ptxd_make_world_install_library_path
> -- 
> 1.7.10.4
> 
> 
> -- 
> ptxdist mailing list
> [email protected]
-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

-- 
ptxdist mailing list
[email protected]

Reply via email to