Hi Hans, Hans Sorge wrote: > I have the OSELAS.BSP-Pengutronix-Mini2440-2012.06.0 installed on my > Micro2440. The display has TD035STED4 the designation. Everything works, > only the display is blank. I have chosen in the kernelconfig TDO35S > support. The touch screen works and I can also turn on the backlight. I use > fbtest but nothing is displayed. Is the shell at all on the display?
>From http://www.pengutronix.de/oselas/bsp/pengutronix/mini2440_bsp_en.html: [...] Known issues OSELAS.BSP-Pengutronix-Mini2440-2012.06.0 Issue: The LCD is always off, independent of the used type Description: The LCD controller gets not enabled due to a broken patch to enable it. So, the attached display never gets valid signals. Solution: Apply this hot fix patch to the OSELAS.BSP-Pengutronix-Mini2440-2012.06.0 [1] board support package after extracting it from the archive. Follow the steps listed in its header to apply the patch. [...] [1] http://www.pengutronix.de/oselas/bsp/pengutronix/download/OSELAS.BSP-Pengutronix-Mini2440-2012.06.0.patch Regards Juergen -- Pengutronix e.K. | Juergen Beisert | Linux Solutions for Science and Industry | http://www.pengutronix.de/ | -- ptxdist mailing list [email protected]
