Hi Juergen, 1- OK for the mailing list 2- Yes, the directory "/opt/OSELAS.Toolchain-2013.12.1/arm-v7a-linux-gnueabihf/" exists and contains a toolchain. 3- I wrote a source and need to create all needed files to be used with Ptxdist. I usually use "how to become a Ptxdist Guru" but there is nothing explained to start from sources without makefile, etc. 4- I have created another project for my sources and don't compile in the toolchain directory 5- It seems the problem appears when I launched the "$ pxtdist compile my_packet" command. Something was broken but where ? I have installed again the toolchain and ptxdist but the problem remains...
Best regards, Sophie ________________________________________ De : Juergen Beisert <[email protected]> Envoyé : jeudi 20 mars 2014 14:30 À : CARAYOL Sophie; [email protected] Objet : Re: [ptxdist] Compilation of OSELAS Toolchain Hi Sophie, please, please, keep the mailing list at least on CC. On Thursday 20 March 2014 10:33:03 CARAYOL Sophie wrote: > it's not the problem of this file. It's the same with the original file. I > joined the file i used (there was light changes). --- arm-v7a-linux-gnueabihf_gcc-4.8.3_glibc-2.18_binutils-2.24_kernel-3.12-sanitized.ptxconfig +++ arm-v7a-linux-gnueabihf_gcc-4.8.3_glibc-2.18_binutils-2.24_kernel-3.13.6-sanitized.ptxconfig @@ -57,13 +57,13 @@ PTXCONF_CROSS_BINUTILS_MD5="e0f71a7b2ddab0f8612336ac81d9636b" # PTXCONF_CROSS_ELF2FLT is not set PTXCONF_KERNEL_HEADERS=y -PTXCONF_KERNEL_HEADERS_VERSION="3.12" -PTXCONF_KERNEL_HEADERS_MD5="cc6ee608854e0da4b64f6c1ff8b6398c" +PTXCONF_KERNEL_HEADERS_VERSION="3.13.6" +PTXCONF_KERNEL_HEADERS_MD5="445aa27da818617409982f42902a6e41" PTXCONF_KERNEL_HEADERS_SANITIZED=y PTXCONF_CROSS_GCC=y PTXCONF_CROSS_GCC_VERSION="4.8.3" -PTXCONF_CROSS_GCC_MD5="729f4ac34ad404892ecafb991bea2da5" -PTXCONF_CROSS_GCC_DL_VERSION="linaro-4.8-2013.11" +PTXCONF_CROSS_GCC_MD5="2b3bbea7806931e2048e0fc5983021c8" +PTXCONF_CROSS_GCC_DL_VERSION="linaro-4.8-2014.02" PTXCONF_CROSS_GCC_PKGVERSION="${PTXCONF_PROJECT} ${PTXCONF_CROSS_GCC_DL_VERSION}" PTXCONF_CROSS_GCC_43=y PTXCONF_CROSS_GCC_45=y Not that much changes. But when I use your config file and start the build, I get: --------------------------------------------------------------------- [jbe@thebe]> ptxdist go error: '/opt/OSELAS.Toolchain-2013.12.1/arm-v7a-linux-gnueabihf/gcc-4.8.3-glibc-2.18-binutils-2.24-kernel-3.13.6-sanitized' does not exist and cannot be created! Please create that dir with write permissions for you. press enter to let sudo do that job! --------------------------------------------------------------------- Where is this step on your machine? Does the "/opt/OSELAS.Toolchain-2013.12.1/arm-v7a-linux-gnueabihf/" directory already exist and already contains a toolchain? > The problem occurred the first time when I tried to use the joined document > "Application Note : work with sources". How do "Application Note : work with sources" correlates with building a toolchain? What do you intend to do? > Maybe, I made something wrong... but there are bugs also in the document :-) First of all: this document is veeeery old. Please try the current "How to become a PTXdist guru" [1] instead. > so I gave up and the problem remains. Maybe the problem is linked to > rules files... Please keep the toolchain building a separate step. Start with the "arm-v7a-linux-gnueabihf" toolchain. If you want to build your own application with the help of PTXdist, create a new PTXdist project, do not re-use the toolchain project for this purpose. Regards, Juergen [1] http://www.pengutronix.de/software/ptxdist/appnotes/OSELAS.BSP-Pengutronix-Generic-arm-Quickstart.pdf -- Pengutronix e.K. | Juergen Beisert | Linux Solutions for Science and Industry | http://www.pengutronix.de/ | ________________________________ [http://www.lacroix-electronics-solutions.com/sites/default/files/pictures/achievements/201401_MEDTECHPHARMA_LE_exhibit.png] ________________________________ Pour des raisons légales et de sécurité, les informations contenues dans ce message ne sont pas juridiquement contraignantes. Sur demande, nous vous adresserons une confirmation écrite nous engageant. Les informations contenues dans ce message électronique ont un caractère strictement confidentiel et sont exclusivement destinées à la personne à laquelle il est adressé. Toute divulgation, utilisation, diffusion ou reproduction de tout ou partie de ce message, ou des informations qu'il contient, est interdite. Ce message est destiné exclusivement à la personne à laquelle il est adressé ou son représentant. Si vous recevez ce message par erreur, merci d'en avertir immédiatement l'expéditeur et de détruire ce message. For legal and security reasons the information provided in this e-mail is not legally binding. Upon request we would be pleased to provide you with a legally binding confirmation in written form. The information transmitted is intended only for the person or entity to which it is addressed and may contain confidential and/or privileged material Any review, retransmission, dissemination or other use of, or taking of any action in reliance upon, this information by persons or entities other than the intended recipient is prohibited. If you received this in error, please contact the sender and delete the material from any computer.. Aus gesetzlichen und Sicherheitsgründen sind die in dieser Nachricht enthaltenen Informationen rechtlich unverbindlich. Auf Anfrage senden wir Ihnen eine verbindliche, schriftliche Bestätigung. Die in dieser E-Mail enthaltenen Informationen sind streng vertraulich und ausschließlich für den Empfänger bestimmt. Jede vollständige oder teilweise Veröffentlichung, Verwendung, Verbreitung oder Vervielfältigung dieser Nachricht oder der darin enthaltenen Informationen ist untersagt. Diese Nachricht ist ausschließlich für die Person bestimmt, an die sie adressiert ist, oder für ihren Vertreter. Sollten Sie diese Nachricht versehentlich erhalten haben, informieren Sie bitte sofort den Absender und vernichten Sie die Nachricht.. Disclaimer Lacroix Electronics -- ptxdist mailing list [email protected]
