On Thu, Aug 30, 2018 at 09:35:50AM +0200, Michael Grzeschik wrote: > This patch adds support for the lxc container system. We install the > userspace lib and application. > > To make sure all necessary kernel options are enabled use: > $ CONFIG=/path/to/kernelconfig lxc-checkconfig > > Signed-off-by: Michael Grzeschik <m.grzesc...@pengutronix.de> > --- > v1 -> v2: - prefixed used variables with PTXCONF_ : > LXC_TEMPLATES, LXC_HOOKS, LXC_SELINUX > - fixed used variable LXC_SYSTEMD_UNIT > - added missing dir /usr/lib/lxc/rootfs > - added dependency to busybox tools when using templates > - added dependency to iptables when starting systemd.service > - removed some extra commented unused options > - removed hooks > - only installing busybox template > - added dependency to busybox_umount > > v2 -> v3: - removed the busybox template and its dependencies > - added patch for dnsmasq to start without dns support > - added install stage to include getent from toolchain > > ...te-new-lxcbr0-subnet-at-startup-time.patch | 134 +++++++++++ > ...-net-start-dnsmasq-without-dnsserver.patch | 24 ++ > patches/lxc-3.0.1/series | 2 + > projectroot/etc/default/lxc-net | 7 + > projectroot/etc/lxc/default.conf | 4 + > rules/lxc.in | 61 +++++ > rules/lxc.make | 211 ++++++++++++++++++ > 7 files changed, 443 insertions(+) > create mode 100644 > patches/lxc-3.0.1/0001-Allocate-new-lxcbr0-subnet-at-startup-time.patch > create mode 100644 > patches/lxc-3.0.1/0002-lxc-net-start-dnsmasq-without-dnsserver.patch > create mode 100644 patches/lxc-3.0.1/series > create mode 100644 projectroot/etc/default/lxc-net > create mode 100644 projectroot/etc/lxc/default.conf > create mode 100644 rules/lxc.in > create mode 100644 rules/lxc.make > > diff --git > a/patches/lxc-3.0.1/0001-Allocate-new-lxcbr0-subnet-at-startup-time.patch > b/patches/lxc-3.0.1/0001-Allocate-new-lxcbr0-subnet-at-startup-time.patch > new file mode 100644 > index 000000000..a1fddbea4 > --- /dev/null > +++ b/patches/lxc-3.0.1/0001-Allocate-new-lxcbr0-subnet-at-startup-time.patch > @@ -0,0 +1,134 @@ > +From: =?UTF-8?q?St=C3=A9phane=20Graber?= <stgra...@ubuntu.com> > +Date: Tue, 3 Nov 2015 11:42:58 -0500 > +Subject: [PATCH] Allocate new lxcbr0 subnet at startup time > + > +--- > + config/init/common/lxc-net.in | 100 > ++++++++++++++++++++++++++++++++++++++---- > + 1 file changed, 91 insertions(+), 9 deletions(-) > + > +diff --git a/config/init/common/lxc-net.in b/config/init/common/lxc-net.in > +index df9f1181d761..6837be1969c2 100644 > +--- a/config/init/common/lxc-net.in > ++++ b/config/init/common/lxc-net.in > +@@ -24,6 +24,85 @@ LXC_IPV6_MASK="" > + LXC_IPV6_NETWORK="" > + LXC_IPV6_NAT="false" > + > ++write_lxc_net() > ++{ > ++ local i=$1 > ++ cat >> $distrosysconfdir/lxc-net << EOF > ++# Leave USE_LXC_BRIDGE as "true" if you want to use lxcbr0 for your > ++# containers. Set to "false" if you'll use virbr0 or another existing > ++# bridge, or mavlan to your host's NIC. > ++USE_LXC_BRIDGE="true" > ++ > ++# If you change the LXC_BRIDGE to something other than lxcbr0, then > ++# you will also need to update your /etc/lxc/default.conf as well as the > ++# configuration (/var/lib/lxc/<container>/config) for any containers > ++# already created using the default config to reflect the new bridge > ++# name. > ++# If you have the dnsmasq daemon installed, you'll also have to update > ++# /etc/dnsmasq.d/lxc and restart the system wide dnsmasq daemon. > ++LXC_BRIDGE="lxcbr0" > ++LXC_ADDR="10.0.$i.1" > ++LXC_NETMASK="255.255.255.0" > ++LXC_NETWORK="10.0.$i.0/24" > ++LXC_DHCP_RANGE="10.0.$i.2,10.0.$i.254" > ++LXC_DHCP_MAX="253" > ++# Uncomment the next line if you'd like to use a conf-file for the lxcbr0 > ++# dnsmasq. For instance, you can use 'dhcp-host=mail1,10.0.3.100' to have > ++# container 'mail1' always get ip address 10.0.3.100. > ++#LXC_DHCP_CONFILE=/etc/lxc/dnsmasq.conf > ++ > ++# Uncomment the next line if you want lxcbr0's dnsmasq to resolve the .lxc > ++# domain. You can then add "server=/lxc/10.0.$i.1' (or your actual > \$LXC_ADDR) > ++# to your system dnsmasq configuration file (normally /etc/dnsmasq.conf, > ++# or /etc/NetworkManager/dnsmasq.d/lxc.conf on systems that use > NetworkManager). > ++# Once these changes are made, restart the lxc-net and network-manager > services. > ++# 'container1.lxc' will then resolve on your host. > ++#LXC_DOMAIN="lxc" > ++EOF > ++} > ++ > ++configure_lxcbr0() > ++{ > ++ local i=3 > ++ cat > $distrosysconfdir/lxc-net << EOF > ++# This file is auto-generated by lxc.postinst if it does not > ++# exist. Customizations will not be overridden. > ++EOF > ++ # if lxcbr0 exists, keep using the same network > ++ if ip addr show lxcbr0 > /dev/null 2>&1 ; then > ++ i=`ip addr show lxcbr0 | grep "inet\>" | awk '{ print $2 }' | awk > -F. '{ print $3 }'` > ++ write_lxc_net $i > ++ return > ++ fi > ++ # if no lxcbr0, find an open 10.0.a.0 network > ++ for l in `ip addr show | grep "inet\>" |awk '{ print $2 }' | grep > '^10\.0\.' | sort -n`; do > ++ j=`echo $l | awk -F. '{ print $3 }'` > ++ if [ $j -gt $i ]; then > ++ write_lxc_net $i > ++ return > ++ fi > ++ i=$((j+1)) > ++ done > ++ if [ $i -ne 254 ]; then > ++ write_lxc_net $i > ++ fi > ++} > ++ > ++update_lxcnet_config() > ++{ > ++ local i=3 > ++ # if lxcbr0 exists, keep using the same network > ++ if ip addr show lxcbr0 > /dev/null 2>&1 ; then > ++ return > ++ fi > ++ # our LXC_NET conflicts with an existing interface. Probably first > ++ # run after system install with package pre-install. Find a new subnet > ++ configure_lxcbr0 > ++ > ++ # and re-load the newly created config > ++ [ ! -f $distrosysconfdir/lxc-net ] || . $distrosysconfdir/lxc-net > ++} > ++ > + [ ! -f $distrosysconfdir/lxc ] || . $distrosysconfdir/lxc > + > + use_iptables_lock="-w" > +@@ -51,7 +130,19 @@ _ifup() { > + ip link set dev ${LXC_BRIDGE} up > + } > + > ++cleanup() { > ++ set +e > ++ if [ "$FAILED" = "1" ]; then > ++ echo "Failed to setup lxc-net." >&2 > ++ stop force > ++ exit 1 > ++ fi > ++} > ++ > + start() { > ++ > ++ [ ! -f $distrosysconfdir/lxc-net ] && update_lxcnet_config
This patch looks wrong. It only does something new if the config does not exist, right? That should never happen for embedded. Why is this patch needed? > ++ > + [ "x$USE_LXC_BRIDGE" = "xtrue" ] || { exit 0; } > + > + [ ! -f "${varrun}/network_up" ] || { echo "lxc-net is already running"; > exit 1; } > +@@ -62,15 +153,6 @@ start() { > + > + FAILED=1 > + > +- cleanup() { > +- set +e > +- if [ "$FAILED" = "1" ]; then > +- echo "Failed to setup lxc-net." >&2 > +- stop force > +- exit 1 > +- fi > +- } > +- > + trap cleanup EXIT HUP INT TERM > + set -e > + > diff --git > a/patches/lxc-3.0.1/0002-lxc-net-start-dnsmasq-without-dnsserver.patch > b/patches/lxc-3.0.1/0002-lxc-net-start-dnsmasq-without-dnsserver.patch > new file mode 100644 > index 000000000..a8cbf3fe2 > --- /dev/null > +++ b/patches/lxc-3.0.1/0002-lxc-net-start-dnsmasq-without-dnsserver.patch > @@ -0,0 +1,24 @@ > +From: Michael Grzeschik <m.grzesc...@pengutronix.de> > +Date: Wed, 29 Aug 2018 16:50:50 +0200 > +Subject: [PATCH] lxc-net: start dnsmasq without dnsserver > + > +So it does not conflict with the systems dnsmasq systemd-service. > + > +Signed-off-by: Michael Grzeschik <m.grzesc...@pengutronix.de> > +--- > + config/init/common/lxc-net.in | 2 +- > + 1 file changed, 1 insertion(+), 1 deletion(-) > + > +diff --git a/config/init/common/lxc-net.in b/config/init/common/lxc-net.in > +index 6837be1969c2..84128d59486b 100644 > +--- a/config/init/common/lxc-net.in > ++++ b/config/init/common/lxc-net.in > +@@ -221,7 +221,7 @@ start() { > + --dhcp-lease-max=${LXC_DHCP_MAX} --dhcp-no-override \ > + --except-interface=lo --interface=${LXC_BRIDGE} \ > + --dhcp-leasefile="${varlib}"/misc/dnsmasq.${LXC_BRIDGE}.leases \ > +- --dhcp-authoritative $LXC_IPV6_ARG || cleanup > ++ --dhcp-authoritative $LXC_IPV6_ARG --port=0 || cleanup I think this this should be --bind-interfaces instead. Otherwise the services in the container will have no DNS right? > + > + touch "${varrun}"/network_up > + FAILED=0 > diff --git a/patches/lxc-3.0.1/series b/patches/lxc-3.0.1/series > new file mode 100644 > index 000000000..eec508771 > --- /dev/null > +++ b/patches/lxc-3.0.1/series > @@ -0,0 +1,2 @@ > +0001-Allocate-new-lxcbr0-subnet-at-startup-time.patch > +0002-lxc-net-start-dnsmasq-without-dnsserver.patch > diff --git a/projectroot/etc/default/lxc-net b/projectroot/etc/default/lxc-net > new file mode 100644 > index 000000000..054a09a0a > --- /dev/null > +++ b/projectroot/etc/default/lxc-net > @@ -0,0 +1,7 @@ > +USE_LXC_BRIDGE="true" > +LXC_BRIDGE="lxcbr0" > +LXC_ADDR="192.168.1.1" > +LXC_NETMASK="255.255.255.0" > +LXC_NETWORK="192.168.1.0/24" > +LXC_DHCP_RANGE="192.168.1.2,192.168.1.254" > +LXC_DHCP_MAX="253" > diff --git a/projectroot/etc/lxc/default.conf > b/projectroot/etc/lxc/default.conf > new file mode 100644 > index 000000000..e7af1e6ae > --- /dev/null > +++ b/projectroot/etc/lxc/default.conf > @@ -0,0 +1,4 @@ > +lxc.net.0.type = veth > +lxc.net.0.link = lxcbr0 > +lxc.net.0.flags = up > +lxc.net.0.hwaddr = 00:16:3e:11:22:34 > diff --git a/rules/lxc.in b/rules/lxc.in > new file mode 100644 > index 000000000..fde637b0d > --- /dev/null > +++ b/rules/lxc.in > @@ -0,0 +1,61 @@ > +## SECTION=system_libraries > + > +menuconfig LXC > + bool > + prompt "lxc " > + select GNUTLS if LXC_GNUTLS > + select LIBSELINUX if LXC_SELINUX > + select LIBSECCOMP if LXC_SECCOMP > + select BUSYBOX_FEATURE_SH_MATH if LXC_SYSTEMD_UNIT > + select SYSTEMD if LXC_SYSTEMD_UNIT > + select DNSMASQ if LXC_SYSTEMD_UNIT > + select IPTABLES if LXC_SYSTEMD_UNIT > + select IPTABLES_IPV4 if LXC_SYSTEMD_UNIT > + select IPTABLES_IPV6 if LXC_SYSTEMD_UNIT > + select IPTABLES_IPV6_SYSTEMD_UNIT if LXC_SYSTEMD_UNIT > + select IPTABLES_IPV4_SYSTEMD_UNIT if LXC_SYSTEMD_UNIT Why are the units needed? > + select IPTABLES_INSTALL_TOOLS if LXC_SYSTEMD_UNIT > + help > + LXC is a userspace interface for the Linux kernel containment > + features. Through a powerful API and simple tools, it lets > + Linux users easily create and manage system or application > + containers. > + > +if LXC > + > +config LXC_GNUTLS > + bool > + prompt "LXC gnutls support" > + default n This is already the default. Remove it (everywhere). > + help > + Turn on to enable gnutls support in lxc What is gnutls used for? > + > +config LXC_SELINUX > + bool > + prompt "LXC selinux support" > + default n > + help > + Turn on to enable selinux support in lxc Use GLOBAL_SELINUX instead. > + > +config LXC_SECCOMP > + bool > + prompt "LXC seccomp support" > + default n > + help > + Turn on to enable seccomp support in lxc LXC is a security feature. I think seccomp should always be enabled. > + > +config LXC_SYSTEMD_UNIT > + bool > + prompt "LXC systemd unit" > + default INITMETHOD_SYSTEMD > + help > + Turn on to install systemd unit for lxc > + > +config LXC_TEST_TOOLS > + bool > + prompt "LXC test applications" > + default n > + help > + Turn on to enable building the lxc test applications > + > +endif > diff --git a/rules/lxc.make b/rules/lxc.make > new file mode 100644 > index 000000000..1eadc6d96 > --- /dev/null > +++ b/rules/lxc.make > @@ -0,0 +1,211 @@ > +# -*-makefile-*- > +# > +# Copyright (C) 2018 by Michael Grzeschik <m...@pengutronix.de> > +# > +# See CREDITS for details about who has contributed to this project. > +# > +# For further information about the PTXdist project and license conditions > +# see the README file. > +# > + > +# > +# We provide this package > +# > +PACKAGES-$(PTXCONF_LXC) += lxc > + > +# > +# Paths and names > +# > +LXC_VERSION := 3.0.1 > +LXC_MD5 := 8eb396dde561e5832ba2d505513a1935 > +LXC := lxc-$(LXC_VERSION) > +LXC_SUFFIX := tar.gz > +LXC_URL := > https://linuxcontainers.org/downloads/lxc/$(LXC).$(LXC_SUFFIX) > +LXC_SOURCE := $(SRCDIR)/$(LXC).$(LXC_SUFFIX) > +LXC_DIR := $(BUILDDIR)/$(LXC) > +LXC_LICENSE := unknown > + > +# > ---------------------------------------------------------------------------- > +# Prepare > +# > ---------------------------------------------------------------------------- > + > +#LXC_CONF_ENV := $(CROSS_ENV) > + > +# > +# autoconf > +# > +LXC_CONF_TOOL := autoconf > +LXC_CONF_OPT := \ > + $(CROSS_AUTOCONF_USR) \ > + --enable-silent-rules \ > + --enable-dependency-tracking \ > + --enable-shared \ > + --disable-static \ > + --disable-fast-install \ > + --disable-libtool-lock \ > + --disable-werror \ > + --disable-rpath \ > + --disable-doc \ > + --disable-api-docs \ > + --disable-apparmor \ > + --$(call ptx/endis, PTXCONF_LXC_GNUTLS)-gnutls \ > + --$(call ptx/endis, PTXCONF_LXC_SELINUX)-selinux \ > + --$(call ptx/endis, PTXCONF_LXC_SECCOMP)-seccomp \ > + --enable-capabilities \ > + --enable-examples \ why? > + --disable-mutex-debugging \ > + --disable-bash \ > + --enable-tools \ > + --enable-commands \ > + --$(call ptx/endis, PTXCONF_LXC_TEST_TOOLS)-tests \ > + --enable-configpath-log \ > + --disable-pam \ > + --with-init-script=systemd \ > + --with-systemdsystemunitdir=/usr/lib/systemd/system/ \ > + --with-distro=unknown \ > + --with-usernic-conf \ > + --with-usernic-db \ > + --with-log-path=/var/log \ > + --with-pamdir=none > + > +LXC_APPLICATIONS := \ > + copy \ > + cgroup \ > + create \ > + snapshot \ > + freeze \ > + config \ > + monitor \ > + unfreeze \ > + device \ > + destroy \ > + ls \ > + console \ > + wait \ > + execute \ > + update-config \ > + stop \ > + checkconfig \ > + checkpoint \ > + usernsexec \ > + attach \ > + start \ > + top \ > + info \ > + autostart \ > + unshare > + > +ifdef PTXCONF_LXC_TEST_TOOLS > +LXC_TEST_TOOLS := \ > + containertests \ > + may-control \ > + console \ > + locktests \ > + no-new-privs \ > + snapshot \ > + concurrent \ > + shutdowntest \ > + cgpath \ > + get_item \ > + criu-check-feature \ > + apparmor \ > + share-ns \ > + saveconfig \ > + clonetest \ > + createtest \ > + createconfig \ > + shortlived \ > + rootfs \ > + getkeys \ > + console-log \ > + attach \ > + reboot \ > + automount \ > + api-reboot \ > + destroytest \ > + startone \ > + raw-clone \ > + parse-config-file \ > + config-jump-table \ > + autostart \ > + state-server \ > + list \ > + device-add-remove \ > + cloneconfig \ > + utils \ > + lxcpath > +endif > + > +# > ---------------------------------------------------------------------------- > +# Target-Install > +# > ---------------------------------------------------------------------------- > + > +$(STATEDIR)/lxc.targetinstall: > + @$(call targetinfo) > + > + @$(call install_init, lxc) > + @$(call install_fixup, lxc, PRIORITY, optional) > + @$(call install_fixup, lxc, SECTION, base) > + @$(call install_fixup, lxc, AUTHOR, "Michael Grzeschik > <m...@pengutronix.de>") > + @$(call install_fixup, lxc, DESCRIPTION, missing) > + > + @$(call install_lib, lxc, 0, 0, 0644, liblxc); > + > + @$(call install_copy, lxc, 0, 0, 0644, /var/lib/lxc); > + @$(call install_copy, lxc, 0, 0, 0644, /usr/lib/lxc/rootfs); > + > + @$(call install_tree, lxc, 0, 0, -, /usr/share/lxc/config); > + > +ifdef PTXCONF_LXC_SELINUX > + @$(call install_tree, lxc, 0, 0, -, /usr/share/lxc/selinux); > +endif > + > + @$(call install_alternative, lxc, 0, 0, 0644, /etc/lxc/default.conf); > + @$(call install_alternative, lxc, 0, 0, 0644, /etc/default/lxc-net); > + > + @$(call install_copy, lxc, 0, 0, 0644, -, /etc/default/lxc) > + > + @$(foreach app, $(LXC_APPLICATIONS), \ > + $(call install_copy, lxc, 0, 0, 0755, > $(LXC_PKGDIR)/usr/bin/lxc-$(app), \ > + /usr/bin/lxc-$(app))$(ptx/nl)) > + > + @$(foreach app, \ > + containers \ > + net \ > + apparmor-load \ > + user-nic \ > + monitord, \ define a variable above. > + $(call install_copy, lxc, 0, 0, 0755, -, \ > + /usr/libexec/lxc/lxc-$(app))$(ptx/nl)) > + > +# This is needed by /usr/libexec/lxc/lxc-net > + @$(call install_copy, lxc, 0, 0, 0755, \ > + $(PTXDIST_SYSROOT_TOOLCHAIN)/usr/bin/getent, /usr/bin/getent) No. Create a option for glibc and select it. > + > +ifdef PTXCONF_LXC_TEST_TOOLS > + @$(foreach app, $(LXC_TEST_TOOLS), \ > + $(call install_copy, lxc, 0, 0, 0755, > $(LXC_PKGDIR)/usr/bin/lxc-test-$(app), \ > + /usr/bin/lxc-tests/$(app))$(ptx/nl)) > +endif > + > +ifdef PTXCONF_LXC_SYSTEMD_UNIT > + @$(foreach rule, \ > + lxc.service \ > + lxc@.service \ > + lxc-net.service, \ > + $(call install_copy, lxc, 0, 0, 0644, -, \ > + /usr/lib/systemd/system/$(rule))$(ptx/nl)) > + > + @$(foreach rule, \ > + lxc.service \ > + lxc@.service \ > + lxc-net.service, \ > + $(call install_link, lxc, ../$(rule), \ > + > /usr/lib/systemd/system/multi-user.target.wants/$(rule))$(ptx/nl)) don't loop for 3 files. Michael > +endif > + > + @$(call install_finish, lxc) > + > + @$(call touch) > + > +# vim: syntax=make > -- > 2.18.0 > > > _______________________________________________ > ptxdist mailing list > ptxdist@pengutronix.de -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ ptxdist mailing list ptxdist@pengutronix.de