Jim is an opensource small-footprint implementation of the Tcl programming language. So far only default set of features is compiled in - lets see what users will really need. This package is intended to replace Tcl (which is in staging already) as it fits PTXdist more due to its small size.
Signed-off-by: Ladislav Michl <[email protected]> --- rules/host-jimtcl.in | 6 ++++ rules/host-jimtcl.make | 33 ++++++++++++++++++ rules/jimtcl.in | 24 +++++++++++++ rules/jimtcl.make | 77 ++++++++++++++++++++++++++++++++++++++++++ 4 files changed, 140 insertions(+) create mode 100644 rules/host-jimtcl.in create mode 100644 rules/host-jimtcl.make create mode 100644 rules/jimtcl.in create mode 100644 rules/jimtcl.make diff --git a/rules/host-jimtcl.in b/rules/host-jimtcl.in new file mode 100644 index 000000000..ccd2d23bd --- /dev/null +++ b/rules/host-jimtcl.in @@ -0,0 +1,6 @@ +## SECTION=hosttools_noprompt +## SECTION=hosttools_platform + +config HOST_JIMTCL + tristate + default ALLYES diff --git a/rules/host-jimtcl.make b/rules/host-jimtcl.make new file mode 100644 index 000000000..fa7b64057 --- /dev/null +++ b/rules/host-jimtcl.make @@ -0,0 +1,33 @@ +# -*-makefile-*- +# +# Copyright (C) 2018 by Ladislav Michl <[email protected]> +# +# See CREDITS for details about who has contributed to this project. +# +# For further information about the PTXdist project and license conditions +# see the README file. +# + +# +# We provide this package +# +HOST_PACKAGES-$(PTXCONF_HOST_JIMTCL) += host-jimtcl + +# +# Paths and names +# +HOST_JIMTCL := $(JIMTCL) +HOST_JIMTCL_DIR := $(HOST_BUILDDIR)/$(HOST_JIMTCL) + +# ---------------------------------------------------------------------------- +# Prepare +# ---------------------------------------------------------------------------- + +# +# Package is not using autoconf but autosetup which is enough compatible... +# +HOST_JIMTCL_CONF_ENV := $(HOST_ENV) +HOST_JIMTCL_CONF_TOOL := autoconf +HOST_JIMTCL_CONF_OPT := --prefix=/usr + +# vim: syntax=make diff --git a/rules/jimtcl.in b/rules/jimtcl.in new file mode 100644 index 000000000..8589160b9 --- /dev/null +++ b/rules/jimtcl.in @@ -0,0 +1,24 @@ +## SECTION=bytecode_engines + +config JIMTCL + tristate + prompt "jimtcl " + help + Jim provides a powerful Tcl language implemented in roughly + 10k lines of code making it suitable for deployment on + Embedded Systems. + +if JIMTCL + +config JIMTCL_SHELL + bool "install jimsh" + help + Install Tcl shell on the target + +config JIMTCL_SYMLINK + bool "install tclsh symlink" + depends on JIMTCL_SHELL + help + Make tclsh symlink to jimsh + +endif diff --git a/rules/jimtcl.make b/rules/jimtcl.make new file mode 100644 index 000000000..67d1c2e5f --- /dev/null +++ b/rules/jimtcl.make @@ -0,0 +1,77 @@ +# -*-makefile-*- +# +# Copyright (C) 2018 by Ladislav Michl <[email protected]> +# +# See CREDITS for details about who has contributed to this project. +# +# For further information about the PTXdist project and license conditions +# see the README file. +# + +# +# We provide this package +# +PACKAGES-$(PTXCONF_JIMTCL) += jimtcl + +# +# Paths and names +# +JIMTCL_VERSION := 0.78 +JIMTCL_MD5 := bde9021d78a77fe28e1bbc423142ab23 +JIMTCL := jimtcl-$(JIMTCL_VERSION) +JIMTCL_SUFFIX := tar.xz +JIMTCL_URL := git://repo.or.cz/jimtcl.git;tag=$(JIMTCL_VERSION) +JIMTCL_SOURCE := $(SRCDIR)/$(JIMTCL).$(JIMTCL_SUFFIX) +JIMTCL_DIR := $(BUILDDIR)/$(JIMTCL) +JIMTCL_LICENSE := BSD-2-Clause + +# ---------------------------------------------------------------------------- +# Prepare +# ---------------------------------------------------------------------------- + +# +# Package is not using autoconf but autosetup which is enough compatible... +# +JIMTCL_CONF_ENV := $(CROSS_ENV) +JIMTCL_CONF_TOOL := autoconf +JIMTCL_CONF_OPT := \ + $(CROSS_AUTOCONF_USR) \ + --shared + +# ---------------------------------------------------------------------------- +# Install +# ---------------------------------------------------------------------------- + +$(STATEDIR)/jimtcl.install: + @$(call targetinfo) + @$(call world/install, JIMTCL) + @ln -sf libjim.so.$(JIMTCL_VERSION) $(JIMTCL_PKGDIR)/usr/lib/libjim.so + @$(call touch) + +# ---------------------------------------------------------------------------- +# Target-Install +# ---------------------------------------------------------------------------- + +$(STATEDIR)/jimtcl.targetinstall: + @$(call targetinfo) + + @$(call install_init, jimtcl) + @$(call install_fixup, jimtcl, PRIORITY, optional) + @$(call install_fixup, jimtcl, SECTION, base) + @$(call install_fixup, jimtcl, AUTHOR, "Ladislav Michl <[email protected]>") + @$(call install_fixup, jimtcl, DESCRIPTION, \ + "A small footprint implementation of the Tcl programming language") + +ifdef PTXCONF_JIMTCL_SHELL + @$(call install_copy, jimtcl, 0, 0, 0755, -, /usr/bin/jimsh) +ifdef PTXCONF_JIMTCL_SYMLINK + @$(call install_link, jimtcl, jimsh, /usr/bin/tclsh) +endif +endif + @$(call install_lib, jimtcl, 0, 0, 0644, libjim) + + @$(call install_finish, jimtcl) + + @$(call touch) + +# vim: syntax=make -- 2.19.0 _______________________________________________ ptxdist mailing list [email protected]
