Thanks, applied. Michael
[sent from post-receive hook] On Fri, 27 Mar 2020 10:52:21 +0100, Ladislav Michl <la...@linux-mips.org> wrote: > As projectroot's dnsmasq.conf is copied from example config of > dnsmasq package, let's remove it from projectroot. > > Signed-off-by: Ladislav Michl <la...@linux-mips.org> > --- > projectroot/etc/dnsmasq.conf | 679 ----------------------------------- > rules/dnsmasq.make | 15 + > 2 files changed, 15 insertions(+), 679 deletions(-) > delete mode 100644 projectroot/etc/dnsmasq.conf > > diff --git a/projectroot/etc/dnsmasq.conf b/projectroot/etc/dnsmasq.conf > deleted file mode 100644 > index 8548b43ed..000000000 > --- a/projectroot/etc/dnsmasq.conf > +++ /dev/null > @@ -1,679 +0,0 @@ > -# Configuration file for dnsmasq. > -# > -# Format is one option per line, legal options are the same > -# as the long options legal on the command line. See > -# "/usr/sbin/dnsmasq --help" or "man 8 dnsmasq" for details. > - > -# Listen on this specific port instead of the standard DNS port > -# (53). Setting this to zero completely disables DNS function, > -# leaving only DHCP and/or TFTP. > -#port=5353 > - > -# The following two options make you a better netizen, since they > -# tell dnsmasq to filter out queries which the public DNS cannot > -# answer, and which load the servers (especially the root servers) > -# unnecessarily. If you have a dial-on-demand link they also stop > -# these requests from bringing up the link unnecessarily. > - > -# Never forward plain names (without a dot or domain part) > -#domain-needed > -# Never forward addresses in the non-routed address spaces. > -#bogus-priv > - > -# Uncomment these to enable DNSSEC validation and caching: > -# (Requires dnsmasq to be built with DNSSEC option.) > -#conf-file=%%PREFIX%%/share/dnsmasq/trust-anchors.conf > -#dnssec > - > -# Replies which are not DNSSEC signed may be legitimate, because the domain > -# is unsigned, or may be forgeries. Setting this option tells dnsmasq to > -# check that an unsigned reply is OK, by finding a secure proof that a DS > -# record somewhere between the root and the domain does not exist. > -# The cost of setting this is that even queries in unsigned domains will need > -# one or more extra DNS queries to verify. > -#dnssec-check-unsigned > - > -# Uncomment this to filter useless windows-originated DNS requests > -# which can trigger dial-on-demand links needlessly. > -# Note that (amongst other things) this blocks all SRV requests, > -# so don't use it if you use eg Kerberos, SIP, XMMP or Google-talk. > -# This option only affects forwarding, SRV records originating for > -# dnsmasq (via srv-host= lines) are not suppressed by it. > -#filterwin2k > - > -# Change this line if you want dns to get its upstream servers from > -# somewhere other that /etc/resolv.conf > -#resolv-file= > - > -# By default, dnsmasq will send queries to any of the upstream > -# servers it knows about and tries to favour servers to are known > -# to be up. Uncommenting this forces dnsmasq to try each query > -# with each server strictly in the order they appear in > -# /etc/resolv.conf > -#strict-order > - > -# If you don't want dnsmasq to read /etc/resolv.conf or any other > -# file, getting its servers from this file instead (see below), then > -# uncomment this. > -#no-resolv > - > -# If you don't want dnsmasq to poll /etc/resolv.conf or other resolv > -# files for changes and re-read them then uncomment this. > -#no-poll > - > -# Add other name servers here, with domain specs if they are for > -# non-public domains. > -#server=/localnet/192.168.0.1 > - > -# Example of routing PTR queries to nameservers: this will send all > -# address->name queries for 192.168.3/24 to nameserver 10.1.2.3 > -#server=/3.168.192.in-addr.arpa/10.1.2.3 > - > -# Add local-only domains here, queries in these domains are answered > -# from /etc/hosts or DHCP only. > -#local=/localnet/ > - > -# Add domains which you want to force to an IP address here. > -# The example below send any host in double-click.net to a local > -# web-server. > -#address=/double-click.net/127.0.0.1 > - > -# --address (and --server) work with IPv6 addresses too. > -#address=/www.thekelleys.org.uk/fe80::20d:60ff:fe36:f83 > - > -# Add the IPs of all queries to yahoo.com, google.com, and their > -# subdomains to the vpn and search ipsets: > -#ipset=/yahoo.com/google.com/vpn,search > - > -# You can control how dnsmasq talks to a server: this forces > -# queries to 10.1.2.3 to be routed via eth1 > -# server=10.1.2.3@eth1 > - > -# and this sets the source (ie local) address used to talk to > -# 10.1.2.3 to 192.168.1.1 port 55 (there must be an interface with that > -# IP on the machine, obviously). > -# server=10.1.2.3@192.168.1.1#55 > - > -# If you want dnsmasq to change uid and gid to something other > -# than the default, edit the following lines. > -#user= > -#group= > - > -# If you want dnsmasq to listen for DHCP and DNS requests only on > -# specified interfaces (and the loopback) give the name of the > -# interface (eg eth0) here. > -# Repeat the line for more than one interface. > -#interface= > -# Or you can specify which interface _not_ to listen on > -#except-interface= > -# Or which to listen on by address (remember to include 127.0.0.1 if > -# you use this.) > -#listen-address= > -# If you want dnsmasq to provide only DNS service on an interface, > -# configure it as shown above, and then use the following line to > -# disable DHCP and TFTP on it. > -#no-dhcp-interface= > - > -# On systems which support it, dnsmasq binds the wildcard address, > -# even when it is listening on only some interfaces. It then discards > -# requests that it shouldn't reply to. This has the advantage of > -# working even when interfaces come and go and change address. If you > -# want dnsmasq to really bind only the interfaces it is listening on, > -# uncomment this option. About the only time you may need this is when > -# running another nameserver on the same machine. > -#bind-interfaces > - > -# If you don't want dnsmasq to read /etc/hosts, uncomment the > -# following line. > -#no-hosts > -# or if you want it to read another file, as well as /etc/hosts, use > -# this. > -#addn-hosts=/etc/banner_add_hosts > - > -# Set this (and domain: see below) if you want to have a domain > -# automatically added to simple names in a hosts-file. > -#expand-hosts > - > -# Set the domain for dnsmasq. this is optional, but if it is set, it > -# does the following things. > -# 1) Allows DHCP hosts to have fully qualified domain names, as long > -# as the domain part matches this setting. > -# 2) Sets the "domain" DHCP option thereby potentially setting the > -# domain of all systems configured by DHCP > -# 3) Provides the domain part for "expand-hosts" > -#domain=thekelleys.org.uk > - > -# Set a different domain for a particular subnet > -#domain=wireless.thekelleys.org.uk,192.168.2.0/24 > - > -# Same idea, but range rather then subnet > -#domain=reserved.thekelleys.org.uk,192.68.3.100,192.168.3.200 > - > -# Uncomment this to enable the integrated DHCP server, you need > -# to supply the range of addresses available for lease and optionally > -# a lease time. If you have more than one network, you will need to > -# repeat this for each network on which you want to supply DHCP > -# service. > -#dhcp-range=192.168.0.50,192.168.0.150,12h > - > -# This is an example of a DHCP range where the netmask is given. This > -# is needed for networks we reach the dnsmasq DHCP server via a relay > -# agent. If you don't know what a DHCP relay agent is, you probably > -# don't need to worry about this. > -#dhcp-range=192.168.0.50,192.168.0.150,255.255.255.0,12h > - > -# This is an example of a DHCP range which sets a tag, so that > -# some DHCP options may be set only for this network. > -#dhcp-range=set:red,192.168.0.50,192.168.0.150 > - > -# Use this DHCP range only when the tag "green" is set. > -#dhcp-range=tag:green,192.168.0.50,192.168.0.150,12h > - > -# Specify a subnet which can't be used for dynamic address allocation, > -# is available for hosts with matching --dhcp-host lines. Note that > -# dhcp-host declarations will be ignored unless there is a dhcp-range > -# of some type for the subnet in question. > -# In this case the netmask is implied (it comes from the network > -# configuration on the machine running dnsmasq) it is possible to give > -# an explicit netmask instead. > -#dhcp-range=192.168.0.0,static > - > -# Enable DHCPv6. Note that the prefix-length does not need to be specified > -# and defaults to 64 if missing/ > -#dhcp-range=1234::2, 1234::500, 64, 12h > - > -# Do Router Advertisements, BUT NOT DHCP for this subnet. > -#dhcp-range=1234::, ra-only > - > -# Do Router Advertisements, BUT NOT DHCP for this subnet, also try and > -# add names to the DNS for the IPv6 address of SLAAC-configured dual-stack > -# hosts. Use the DHCPv4 lease to derive the name, network segment and > -# MAC address and assume that the host will also have an > -# IPv6 address calculated using the SLAAC algorithm. > -#dhcp-range=1234::, ra-names > - > -# Do Router Advertisements, BUT NOT DHCP for this subnet. > -# Set the lifetime to 46 hours. (Note: minimum lifetime is 2 hours.) > -#dhcp-range=1234::, ra-only, 48h > - > -# Do DHCP and Router Advertisements for this subnet. Set the A bit in the RA > -# so that clients can use SLAAC addresses as well as DHCP ones. > -#dhcp-range=1234::2, 1234::500, slaac > - > -# Do Router Advertisements and stateless DHCP for this subnet. Clients will > -# not get addresses from DHCP, but they will get other configuration > information. > -# They will use SLAAC for addresses. > -#dhcp-range=1234::, ra-stateless > - > -# Do stateless DHCP, SLAAC, and generate DNS names for SLAAC addresses > -# from DHCPv4 leases. > -#dhcp-range=1234::, ra-stateless, ra-names > - > -# Do router advertisements for all subnets where we're doing DHCPv6 > -# Unless overridden by ra-stateless, ra-names, et al, the router > -# advertisements will have the M and O bits set, so that the clients > -# get addresses and configuration from DHCPv6, and the A bit reset, so the > -# clients don't use SLAAC addresses. > -#enable-ra > - > -# Supply parameters for specified hosts using DHCP. There are lots > -# of valid alternatives, so we will give examples of each. Note that > -# IP addresses DO NOT have to be in the range given above, they just > -# need to be on the same network. The order of the parameters in these > -# do not matter, it's permissible to give name, address and MAC in any > -# order. > - > -# Always allocate the host with Ethernet address 11:22:33:44:55:66 > -# The IP address 192.168.0.60 > -#dhcp-host=11:22:33:44:55:66,192.168.0.60 > - > -# Always set the name of the host with hardware address > -# 11:22:33:44:55:66 to be "fred" > -#dhcp-host=11:22:33:44:55:66,fred > - > -# Always give the host with Ethernet address 11:22:33:44:55:66 > -# the name fred and IP address 192.168.0.60 and lease time 45 minutes > -#dhcp-host=11:22:33:44:55:66,fred,192.168.0.60,45m > - > -# Give a host with Ethernet address 11:22:33:44:55:66 or > -# 12:34:56:78:90:12 the IP address 192.168.0.60. Dnsmasq will assume > -# that these two Ethernet interfaces will never be in use at the same > -# time, and give the IP address to the second, even if it is already > -# in use by the first. Useful for laptops with wired and wireless > -# addresses. > -#dhcp-host=11:22:33:44:55:66,12:34:56:78:90:12,192.168.0.60 > - > -# Give the machine which says its name is "bert" IP address > -# 192.168.0.70 and an infinite lease > -#dhcp-host=bert,192.168.0.70,infinite > - > -# Always give the host with client identifier 01:02:02:04 > -# the IP address 192.168.0.60 > -#dhcp-host=id:01:02:02:04,192.168.0.60 > - > -# Always give the InfiniBand interface with hardware address > -# 80:00:00:48:fe:80:00:00:00:00:00:00:f4:52:14:03:00:28:05:81 the > -# ip address 192.168.0.61. The client id is derived from the prefix > -# ff:00:00:00:00:00:02:00:00:02:c9:00 and the last 8 pairs of > -# hex digits of the hardware address. > -#dhcp-host=id:ff:00:00:00:00:00:02:00:00:02:c9:00:f4:52:14:03:00:28:05:81,192.168.0.61 > - > -# Always give the host with client identifier "marjorie" > -# the IP address 192.168.0.60 > -#dhcp-host=id:marjorie,192.168.0.60 > - > -# Enable the address given for "judge" in /etc/hosts > -# to be given to a machine presenting the name "judge" when > -# it asks for a DHCP lease. > -#dhcp-host=judge > - > -# Never offer DHCP service to a machine whose Ethernet > -# address is 11:22:33:44:55:66 > -#dhcp-host=11:22:33:44:55:66,ignore > - > -# Ignore any client-id presented by the machine with Ethernet > -# address 11:22:33:44:55:66. This is useful to prevent a machine > -# being treated differently when running under different OS's or > -# between PXE boot and OS boot. > -#dhcp-host=11:22:33:44:55:66,id:* > - > -# Send extra options which are tagged as "red" to > -# the machine with Ethernet address 11:22:33:44:55:66 > -#dhcp-host=11:22:33:44:55:66,set:red > - > -# Send extra options which are tagged as "red" to > -# any machine with Ethernet address starting 11:22:33: > -#dhcp-host=11:22:33:*:*:*,set:red > - > -# Give a fixed IPv6 address and name to client with > -# DUID 00:01:00:01:16:d2:83:fc:92:d4:19:e2:d8:b2 > -# Note the MAC addresses CANNOT be used to identify DHCPv6 clients. > -# Note also that the [] around the IPv6 address are obligatory. > -#dhcp-host=id:00:01:00:01:16:d2:83:fc:92:d4:19:e2:d8:b2, fred, [1234::5] > - > -# Ignore any clients which are not specified in dhcp-host lines > -# or /etc/ethers. Equivalent to ISC "deny unknown-clients". > -# This relies on the special "known" tag which is set when > -# a host is matched. > -#dhcp-ignore=tag:!known > - > -# Send extra options which are tagged as "red" to any machine whose > -# DHCP vendorclass string includes the substring "Linux" > -#dhcp-vendorclass=set:red,Linux > - > -# Send extra options which are tagged as "red" to any machine one > -# of whose DHCP userclass strings includes the substring "accounts" > -#dhcp-userclass=set:red,accounts > - > -# Send extra options which are tagged as "red" to any machine whose > -# MAC address matches the pattern. > -#dhcp-mac=set:red,00:60:8C:*:*:* > - > -# If this line is uncommented, dnsmasq will read /etc/ethers and act > -# on the ethernet-address/IP pairs found there just as if they had > -# been given as --dhcp-host options. Useful if you keep > -# MAC-address/host mappings there for other purposes. > -#read-ethers > - > -# Send options to hosts which ask for a DHCP lease. > -# See RFC 2132 for details of available options. > -# Common options can be given to dnsmasq by name: > -# run "dnsmasq --help dhcp" to get a list. > -# Note that all the common settings, such as netmask and > -# broadcast address, DNS server and default route, are given > -# sane defaults by dnsmasq. You very likely will not need > -# any dhcp-options. If you use Windows clients and Samba, there > -# are some options which are recommended, they are detailed at the > -# end of this section. > - > -# Override the default route supplied by dnsmasq, which assumes the > -# router is the same machine as the one running dnsmasq. > -#dhcp-option=3,1.2.3.4 > - > -# Do the same thing, but using the option name > -#dhcp-option=option:router,1.2.3.4 > - > -# Override the default route supplied by dnsmasq and send no default > -# route at all. Note that this only works for the options sent by > -# default (1, 3, 6, 12, 28) the same line will send a zero-length option > -# for all other option numbers. > -#dhcp-option=3 > - > -# Set the NTP time server addresses to 192.168.0.4 and 10.10.0.5 > -#dhcp-option=option:ntp-server,192.168.0.4,10.10.0.5 > - > -# Send DHCPv6 option. Note [] around IPv6 addresses. > -#dhcp-option=option6:dns-server,[1234::77],[1234::88] > - > -# Send DHCPv6 option for namservers as the machine running > -# dnsmasq and another. > -#dhcp-option=option6:dns-server,[::],[1234::88] > - > -# Ask client to poll for option changes every six hours. (RFC4242) > -#dhcp-option=option6:information-refresh-time,6h > - > -# Set option 58 client renewal time (T1). Defaults to half of the > -# lease time if not specified. (RFC2132) > -#dhcp-option=option:T1,1m > - > -# Set option 59 rebinding time (T2). Defaults to 7/8 of the > -# lease time if not specified. (RFC2132) > -#dhcp-option=option:T2,2m > - > -# Set the NTP time server address to be the same machine as > -# is running dnsmasq > -#dhcp-option=42,0.0.0.0 > - > -# Set the NIS domain name to "welly" > -#dhcp-option=40,welly > - > -# Set the default time-to-live to 50 > -#dhcp-option=23,50 > - > -# Set the "all subnets are local" flag > -#dhcp-option=27,1 > - > -# Send the etherboot magic flag and then etherboot options (a string). > -#dhcp-option=128,e4:45:74:68:00:00 > -#dhcp-option=129,NIC=eepro100 > - > -# Specify an option which will only be sent to the "red" network > -# (see dhcp-range for the declaration of the "red" network) > -# Note that the tag: part must precede the option: part. > -#dhcp-option = tag:red, option:ntp-server, 192.168.1.1 > - > -# The following DHCP options set up dnsmasq in the same way as is specified > -# for the ISC dhcpcd in > -# http://www.samba.org/samba/ftp/docs/textdocs/DHCP-Server-Configuration.txt > -# adapted for a typical dnsmasq installation where the host running > -# dnsmasq is also the host running samba. > -# you may want to uncomment some or all of them if you use > -# Windows clients and Samba. > -#dhcp-option=19,0 # option ip-forwarding off > -#dhcp-option=44,0.0.0.0 # set netbios-over-TCP/IP nameserver(s) aka WINS > server(s) > -#dhcp-option=45,0.0.0.0 # netbios datagram distribution server > -#dhcp-option=46,8 # netbios node type > - > -# Send an empty WPAD option. This may be REQUIRED to get windows 7 to behave. > -#dhcp-option=252,"\n" > - > -# Send RFC-3397 DNS domain search DHCP option. WARNING: Your DHCP client > -# probably doesn't support this...... > -#dhcp-option=option:domain-search,eng.apple.com,marketing.apple.com > - > -# Send RFC-3442 classless static routes (note the netmask encoding) > -#dhcp-option=121,192.168.1.0/24,1.2.3.4,10.0.0.0/8,5.6.7.8 > - > -# Send vendor-class specific options encapsulated in DHCP option 43. > -# The meaning of the options is defined by the vendor-class so > -# options are sent only when the client supplied vendor class > -# matches the class given here. (A substring match is OK, so "MSFT" > -# matches "MSFT" and "MSFT 5.0"). This example sets the > -# mtftp address to 0.0.0.0 for PXEClients. > -#dhcp-option=vendor:PXEClient,1,0.0.0.0 > - > -# Send microsoft-specific option to tell windows to release the DHCP lease > -# when it shuts down. Note the "i" flag, to tell dnsmasq to send the > -# value as a four-byte integer - that's what microsoft wants. See > -# > http://technet2.microsoft.com/WindowsServer/en/library/a70f1bb7-d2d4-49f0-96d6-4b7414ecfaae1033.mspx?mfr=true > -#dhcp-option=vendor:MSFT,2,1i > - > -# Send the Encapsulated-vendor-class ID needed by some configurations of > -# Etherboot to allow is to recognise the DHCP server. > -#dhcp-option=vendor:Etherboot,60,"Etherboot" > - > -# Send options to PXELinux. Note that we need to send the options even > -# though they don't appear in the parameter request list, so we need > -# to use dhcp-option-force here. > -# See http://syslinux.zytor.com/pxe.php#special for details. > -# Magic number - needed before anything else is recognised > -#dhcp-option-force=208,f1:00:74:7e > -# Configuration file name > -#dhcp-option-force=209,configs/common > -# Path prefix > -#dhcp-option-force=210,/tftpboot/pxelinux/files/ > -# Reboot time. (Note 'i' to send 32-bit value) > -#dhcp-option-force=211,30i > - > -# Set the boot filename for netboot/PXE. You will only need > -# this if you want to boot machines over the network and you will need > -# a TFTP server; either dnsmasq's built-in TFTP server or an > -# external one. (See below for how to enable the TFTP server.) > -#dhcp-boot=pxelinux.0 > - > -# The same as above, but use custom tftp-server instead machine running > dnsmasq > -#dhcp-boot=pxelinux,server.name,192.168.1.100 > - > -# Boot for iPXE. The idea is to send two different > -# filenames, the first loads iPXE, and the second tells iPXE what to > -# load. The dhcp-match sets the ipxe tag for requests from iPXE. > -#dhcp-boot=undionly.kpxe > -#dhcp-match=set:ipxe,175 # iPXE sends a 175 option. > -#dhcp-boot=tag:ipxe,http://boot.ipxe.org/demo/boot.php > - > -# Encapsulated options for iPXE. All the options are > -# encapsulated within option 175 > -#dhcp-option=encap:175, 1, 5b # priority code > -#dhcp-option=encap:175, 176, 1b # no-proxydhcp > -#dhcp-option=encap:175, 177, string # bus-id > -#dhcp-option=encap:175, 189, 1b # BIOS drive code > -#dhcp-option=encap:175, 190, user # iSCSI username > -#dhcp-option=encap:175, 191, pass # iSCSI password > - > -# Test for the architecture of a netboot client. PXE clients are > -# supposed to send their architecture as option 93. (See RFC 4578) > -#dhcp-match=peecees, option:client-arch, 0 #x86-32 > -#dhcp-match=itanics, option:client-arch, 2 #IA64 > -#dhcp-match=hammers, option:client-arch, 6 #x86-64 > -#dhcp-match=mactels, option:client-arch, 7 #EFI x86-64 > - > -# Do real PXE, rather than just booting a single file, this is an > -# alternative to dhcp-boot. > -#pxe-prompt="What system shall I netboot?" > -# or with timeout before first available action is taken: > -#pxe-prompt="Press F8 for menu.", 60 > - > -# Available boot services. for PXE. > -#pxe-service=x86PC, "Boot from local disk" > - > -# Loads <tftp-root>/pxelinux.0 from dnsmasq TFTP server. > -#pxe-service=x86PC, "Install Linux", pxelinux > - > -# Loads <tftp-root>/pxelinux.0 from TFTP server at 1.2.3.4. > -# Beware this fails on old PXE ROMS. > -#pxe-service=x86PC, "Install Linux", pxelinux, 1.2.3.4 > - > -# Use bootserver on network, found my multicast or broadcast. > -#pxe-service=x86PC, "Install windows from RIS server", 1 > - > -# Use bootserver at a known IP address. > -#pxe-service=x86PC, "Install windows from RIS server", 1, 1.2.3.4 > - > -# If you have multicast-FTP available, > -# information for that can be passed in a similar way using options 1 > -# to 5. See page 19 of > -# http://download.intel.com/design/archives/wfm/downloads/pxespec.pdf > - > - > -# Enable dnsmasq's built-in TFTP server > -#enable-tftp > - > -# Set the root directory for files available via FTP. > -#tftp-root=/var/lib/misc/ftpd > - > -# Do not abort if the tftp-root is unavailable > -#tftp-no-fail > - > -# Make the TFTP server more secure: with this set, only files owned by > -# the user dnsmasq is running as will be send over the net. > -#tftp-secure > - > -# This option stops dnsmasq from negotiating a larger blocksize for TFTP > -# transfers. It will slow things down, but may rescue some broken TFTP > -# clients. > -#tftp-no-blocksize > - > -# Set the boot file name only when the "red" tag is set. > -#dhcp-boot=tag:red,pxelinux.red-net > - > -# An example of dhcp-boot with an external TFTP server: the name and IP > -# address of the server are given after the filename. > -# Can fail with old PXE ROMS. Overridden by --pxe-service. > -#dhcp-boot=/var/lib/misc/ftpd/pxelinux.0,boothost,192.168.0.3 > - > -# If there are multiple external tftp servers having a same name > -# (using /etc/hosts) then that name can be specified as the > -# tftp_servername (the third option to dhcp-boot) and in that > -# case dnsmasq resolves this name and returns the resultant IP > -# addresses in round robin fashion. This facility can be used to > -# load balance the tftp load among a set of servers. > -#dhcp-boot=/var/lib/misc/ftpd/pxelinux.0,boothost,tftp_server_name > - > -# Set the limit on DHCP leases, the default is 150 > -#dhcp-lease-max=150 > - > -# The DHCP server needs somewhere on disk to keep its lease database. > -# This defaults to a sane location, but if you want to change it, use > -# the line below. > -#dhcp-leasefile=/var/lib/misc/dnsmasq.leases > - > -# Set the DHCP server to authoritative mode. In this mode it will barge in > -# and take over the lease for any client which broadcasts on the network, > -# whether it has a record of the lease or not. This avoids long timeouts > -# when a machine wakes up on a new network. DO NOT enable this if there's > -# the slightest chance that you might end up accidentally configuring a DHCP > -# server for your campus/company accidentally. The ISC server uses > -# the same option, and this URL provides more information: > -# http://www.isc.org/files/auth.html > -#dhcp-authoritative > - > -# Set the DHCP server to enable DHCPv4 Rapid Commit Option per RFC 4039. > -# In this mode it will respond to a DHCPDISCOVER message including a Rapid > Commit > -# option with a DHCPACK including a Rapid Commit option and fully committed > address > -# and configuration information. This must only be enabled if either the > server is > -# the only server for the subnet, or multiple servers are present and they > each > -# commit a binding for all clients. > -#dhcp-rapid-commit > - > -# Run an executable when a DHCP lease is created or destroyed. > -# The arguments sent to the script are "add" or "del", > -# then the MAC address, the IP address and finally the hostname > -# if there is one. > -#dhcp-script=/bin/echo > - > -# Set the cachesize here. > -#cache-size=150 > - > -# If you want to disable negative caching, uncomment this. > -#no-negcache > - > -# Normally responses which come from /etc/hosts and the DHCP lease > -# file have Time-To-Live set as zero, which conventionally means > -# do not cache further. If you are happy to trade lower load on the > -# server for potentially stale date, you can set a time-to-live (in > -# seconds) here. > -#local-ttl= > - > -# If you want dnsmasq to detect attempts by Verisign to send queries > -# to unregistered .com and .net hosts to its sitefinder service and > -# have dnsmasq instead return the correct NXDOMAIN response, uncomment > -# this line. You can add similar lines to do the same for other > -# registries which have implemented wildcard A records. > -#bogus-nxdomain=64.94.110.11 > - > -# If you want to fix up DNS results from upstream servers, use the > -# alias option. This only works for IPv4. > -# This alias makes a result of 1.2.3.4 appear as 5.6.7.8 > -#alias=1.2.3.4,5.6.7.8 > -# and this maps 1.2.3.x to 5.6.7.x > -#alias=1.2.3.0,5.6.7.0,255.255.255.0 > -# and this maps 192.168.0.10->192.168.0.40 to 10.0.0.10->10.0.0.40 > -#alias=192.168.0.10-192.168.0.40,10.0.0.0,255.255.255.0 > - > -# Change these lines if you want dnsmasq to serve MX records. > - > -# Return an MX record named "maildomain.com" with target > -# servermachine.com and preference 50 > -#mx-host=maildomain.com,servermachine.com,50 > - > -# Set the default target for MX records created using the localmx option. > -#mx-target=servermachine.com > - > -# Return an MX record pointing to the mx-target for all local > -# machines. > -#localmx > - > -# Return an MX record pointing to itself for all local machines. > -#selfmx > - > -# Change the following lines if you want dnsmasq to serve SRV > -# records. These are useful if you want to serve ldap requests for > -# Active Directory and other windows-originated DNS requests. > -# See RFC 2782. > -# You may add multiple srv-host lines. > -# The fields are <name>,<target>,<port>,<priority>,<weight> > -# If the domain part if missing from the name (so that is just has the > -# service and protocol sections) then the domain given by the domain= > -# config option is used. (Note that expand-hosts does not need to be > -# set for this to work.) > - > -# A SRV record sending LDAP for the example.com domain to > -# ldapserver.example.com port 389 > -#srv-host=_ldap._tcp.example.com,ldapserver.example.com,389 > - > -# A SRV record sending LDAP for the example.com domain to > -# ldapserver.example.com port 389 (using domain=) > -#domain=example.com > -#srv-host=_ldap._tcp,ldapserver.example.com,389 > - > -# Two SRV records for LDAP, each with different priorities > -#srv-host=_ldap._tcp.example.com,ldapserver.example.com,389,1 > -#srv-host=_ldap._tcp.example.com,ldapserver.example.com,389,2 > - > -# A SRV record indicating that there is no LDAP server for the domain > -# example.com > -#srv-host=_ldap._tcp.example.com > - > -# The following line shows how to make dnsmasq serve an arbitrary PTR > -# record. This is useful for DNS-SD. (Note that the > -# domain-name expansion done for SRV records _does_not > -# occur for PTR records.) > -#ptr-record=_http._tcp.dns-sd-services,"New Employee > Page._http._tcp.dns-sd-services" > - > -# Change the following lines to enable dnsmasq to serve TXT records. > -# These are used for things like SPF and zeroconf. (Note that the > -# domain-name expansion done for SRV records _does_not > -# occur for TXT records.) > - > -#Example SPF. > -#txt-record=example.com,"v=spf1 a -all" > - > -#Example zeroconf > -#txt-record=_http._tcp.example.com,name=value,paper=A4 > - > -# Provide an alias for a "local" DNS name. Note that this _only_ works > -# for targets which are names from DHCP or /etc/hosts. Give host > -# "bert" another name, bertrand > -#cname=bertand,bert > - > -# For debugging purposes, log each DNS query as it passes through > -# dnsmasq. > -#log-queries > - > -# Log lots of extra information about DHCP transactions. > -#log-dhcp > - > -# Include another lot of configuration options. > -#conf-file=/etc/dnsmasq.more.conf > -#conf-dir=/etc/dnsmasq.d > - > -# Include all the files in a directory except those ending in .bak > -#conf-dir=/etc/dnsmasq.d,.bak > - > -# Include all files in a directory which end in .conf > -#conf-dir=/etc/dnsmasq.d/,*.conf > - > -# If a DHCP client claims that its name is "wpad", ignore that. > -# This fixes a security hole. see CERT Vulnerability VU#598349 > -#dhcp-name-match=set:wpad-ignore,wpad > -#dhcp-ignore-names=tag:wpad-ignore > diff --git a/rules/dnsmasq.make b/rules/dnsmasq.make > index 256b0f000..37039cf10 100644 > --- a/rules/dnsmasq.make > +++ b/rules/dnsmasq.make > @@ -50,6 +50,21 @@ DNSMASQ_MAKE_OPT := \ > COPTS='$(DNSMASQ_COPT)' \ > "CFLAGS+=-Wall -Wextra -ggdb3 -O2" > > +# > ---------------------------------------------------------------------------- > +# Install > +# > ---------------------------------------------------------------------------- > + > +DNSMASQ_INSTALL_OPT := \ > + $(DNSMASQ_MAKE_OPT) \ > + install > + > +$(STATEDIR)/dnsmasq.install: > + @$(call targetinfo) > + @$(call world/install, DNSMASQ) > + @install -vD -m 644 "$(DNSMASQ_DIR)/dnsmasq.conf.example" \ > + "$(DNSMASQ_PKGDIR)/etc/dnsmasq.conf" > + @$(call touch) > + > # > ---------------------------------------------------------------------------- > # Target-Install > # > ---------------------------------------------------------------------------- > _______________________________________________ ptxdist mailing list ptxdist@pengutronix.de
