On 6/9/20 5:18 PM, Bastian Krause wrote: > HAProxy consists of a GPL core and GPL modules while exportable include > files are licensed under LGPL. > > Some options (e.g. lua, pcre) are not yet configurable, this can be > extended if someone needs them. > > A minimalistic config is provided to be able to test it, for everything > else an adjusted config must be installed. As HAProxy's config examples > expect some custom files in /etc/haproxy install_alternative_tree is > used to install custom configuration files and more easily. > > Signed-off-by: Bastian Krause <[email protected]> > --- > projectroot/etc/haproxy/haproxy.cfg | 24 +++++++ > rules/haproxy.in | 25 +++++++ > rules/haproxy.make | 100 ++++++++++++++++++++++++++++ > 3 files changed, 149 insertions(+) > create mode 100644 projectroot/etc/haproxy/haproxy.cfg > create mode 100644 rules/haproxy.in > create mode 100644 rules/haproxy.make > > diff --git a/projectroot/etc/haproxy/haproxy.cfg > b/projectroot/etc/haproxy/haproxy.cfg > new file mode 100644 > index 000000000..0f9c28d9c > --- /dev/null > +++ b/projectroot/etc/haproxy/haproxy.cfg > @@ -0,0 +1,24 @@ > +global > + log /dev/log local0 > + log /dev/log local1 notice > + stats socket /run/haproxy-admin.sock mode 660 level admin > + stats timeout 30s > + user www > + group www > + daemon > + > +defaults > + log global > + mode http > + option httplog > + option dontlognull > + timeout connect 5000 > + timeout client 50000 > + timeout server 50000 > + #errorfile 400 /etc/haproxy/errors/400.http > + #errorfile 403 /etc/haproxy/errors/403.http > + #errorfile 408 /etc/haproxy/errors/408.http > + #errorfile 500 /etc/haproxy/errors/500.http > + #errorfile 502 /etc/haproxy/errors/502.http > + #errorfile 503 /etc/haproxy/errors/503.http > + #errorfile 504 /etc/haproxy/errors/504.http > diff --git a/rules/haproxy.in b/rules/haproxy.in > new file mode 100644 > index 000000000..9972f4132 > --- /dev/null > +++ b/rules/haproxy.in > @@ -0,0 +1,25 @@ > +## SECTION=networking > + > +menuconfig HAPROXY > + tristate > + prompt "haproxy " > + select LIBC_CRYPT > + select LIBC_DL > + select LIBC_PTHREAD > + select LIBC_RT > + select OPENSSL
haproxy uses libsystemd in case USE_SYSTEMD=1 is set, so add: select SYSTEMD if INITMETHOD_SYSTEMD Will send a v2. Regards, Bastian > + select ZLIB > + help > + Reliable, High Performance TCP/HTTP Load Balancer > + > +if HAPROXY > + > +config HAPROXY_OPENSSL > + bool > + prompt "enable OpenSSL support" > + > +config HAPROXY_SYSTEMD_UNIT > + bool > + prompt "install systemd service files" > + > +endif > diff --git a/rules/haproxy.make b/rules/haproxy.make > new file mode 100644 > index 000000000..a0146cbf3 > --- /dev/null > +++ b/rules/haproxy.make > @@ -0,0 +1,100 @@ > +# -*-makefile-*- > +# > +# Copyright (C) 2020 by Bastian Krause <[email protected]> > +# > +# For further information about the PTXdist project and license conditions > +# see the README file. > +# > + > +# > +# We provide this package > +# > +PACKAGES-$(PTXCONF_HAPROXY) += haproxy > + > +# > +# Paths and names > +# > +HAPROXY_VERSION := 2.1.6 > +HAPROXY_MD5 := 95ffd25fc6b57b4f1650322a7587f972 > +HAPROXY := haproxy-$(HAPROXY_VERSION) > +HAPROXY_SUFFIX := tar.gz > +HAPROXY_URL := https://www.haproxy.org/download/$(basename > $(HAPROXY_VERSION))/src/$(HAPROXY).$(HAPROXY_SUFFIX) > +HAPROXY_SOURCE := $(SRCDIR)/$(HAPROXY).$(HAPROXY_SUFFIX) > +HAPROXY_DIR := $(BUILDDIR)/$(HAPROXY) > +HAPROXY_LICENSE := GPL-2.0-or-later AND LGPL-2.1-or-later > +HAPROXY_LICENSE_FILES := \ > + file://doc/gpl.txt;md5=892f569a555ba9c07a568a7c0c4fa63a \ > + file://doc/lgpl.txt;md5=fbc093901857fcd118f065f900982c24 > + > +# > ---------------------------------------------------------------------------- > +# Prepare > +# > ---------------------------------------------------------------------------- > + > +HAPROXY_CONF_TOOL := NO > +HAPROXY_MAKE_OPT := \ > + CC=$(CROSS_CC) \ > + PREFIX=/usr \ > + TARGET=linux-glibc \ > + USE_GZIP=1 \ > + USE_LUA= \ > + USE_OPENSSL=$(call ptx/ifdef,PTXCONF_HAPROXY_OPENSSL,1,) \ > + USE_PCRE= \ > + USE_RT=1 \ > + USE_SLZ= \ > + USE_SYSTEMD=$(call ptx/ifdef,PTXCONF_INITMETHOD_SYSTEMD,1,) \ > + USE_ZLIB=1 > + > +HAPROXY_INSTALL_OPT := \ > + PREFIX=/usr \ > + install > + > +# > ---------------------------------------------------------------------------- > +# Compile > +# > ---------------------------------------------------------------------------- > + > +$(STATEDIR)/haproxy.compile: > + @$(call targetinfo) > + @$(call world/compile, HAPROXY) > + @$(call compile, HAPROXY, -C contrib/systemd $(HAPROXY_MAKE_OPT)) > + @$(call touch) > + > +# > ---------------------------------------------------------------------------- > +# Install > +# > ---------------------------------------------------------------------------- > + > +$(STATEDIR)/haproxy.install: > + @$(call targetinfo) > + @$(call world/install, HAPROXY) > + @install -v -D -m644 $(HAPROXY_DIR)/contrib/systemd/haproxy.service \ > + $(HAPROXY_PKGDIR)/usr/lib/systemd/system/haproxy.service > + @$(call touch) > + > +# > ---------------------------------------------------------------------------- > +# Target-Install > +# > ---------------------------------------------------------------------------- > + > +$(STATEDIR)/haproxy.targetinstall: > + @$(call targetinfo) > + > + @$(call install_init, haproxy) > + @$(call install_fixup, haproxy,PRIORITY,optional) > + @$(call install_fixup, haproxy,SECTION,base) > + @$(call install_fixup, haproxy,AUTHOR,"Bastian Krause > <[email protected]>") > + @$(call install_fixup, haproxy,DESCRIPTION,missing) > + > + @$(call install_copy, haproxy, 0, 0, 0755, -, /usr/sbin/haproxy) > + > + @$(call install_alternative_tree, haproxy, 0, 0, /etc/haproxy) > + > +ifdef PTXCONF_HAPROXY_SYSTEMD_UNIT > + @$(call install_copy, haproxy, 0, 0, 0644, -, \ > + /usr/lib/systemd/system/haproxy.service) > + @$(call install_link, haproxy, ../haproxy.service, \ > + /usr/lib/systemd/system/multi-user.target.wants/haproxy.service) > +endif > + > + @$(call install_finish, haproxy) > + > + @$(call touch) > + > +# vim: syntax=make > -- Pengutronix e.K. | | Steuerwalder Str. 21 | http://www.pengutronix.de/ | 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ ptxdist mailing list [email protected] To unsubscribe, send a mail with subject "unsubscribe" to [email protected]
