On Wed, Sep 23, 2020 at 01:39:34PM +0200, Bastian Krause wrote: > Signed-off-by: Bastian Krause <[email protected]> > --- > .../etc/rauc-hawkbit-updater/config.conf | 43 +++++++++++ > rules/rauc-hawkbit-updater.in | 15 ++++ > rules/rauc-hawkbit-updater.make | 72 +++++++++++++++++++ > 3 files changed, 130 insertions(+) > create mode 100644 projectroot/etc/rauc-hawkbit-updater/config.conf > create mode 100644 rules/rauc-hawkbit-updater.in > create mode 100644 rules/rauc-hawkbit-updater.make > > diff --git a/projectroot/etc/rauc-hawkbit-updater/config.conf > b/projectroot/etc/rauc-hawkbit-updater/config.conf > new file mode 100644 > index 000000000..a1dfa97ef > --- /dev/null > +++ b/projectroot/etc/rauc-hawkbit-updater/config.conf > @@ -0,0 +1,43 @@ > +[client] > +# host or IP and optional port > +hawkbit_server = 10.10.0.254:8080 > + > +# true = HTTPS, false = HTTP > +ssl = false > + > +# validate ssl certificate (only use if ssl is true) > +ssl_verify = false > + > +# Tenant id > +tenant_id = DEFAULT > + > +# Target name (controller id) > +target_name = test-target > + > +# Security token > +auth_token = cb115a721af28f781b493fa467819ef5
What is this token for? Does it matter if everybody just used this default value? Because if this just works then it probably won't be changed. > + > +# Or gateway_token can be used instead of auth_token > +#gateway_token = cb115a721af28f781b493fa467819ef5 > + > +# Temporay file RAUC bundle should be downloaded to > +bundle_download_location = /tmp/bundle.raucb > + > +# time in seconds to wait before retrying > +retry_wait = 60 > + > +# connection timeout in seconds > +connect_timeout = 20 > + > +# request timeout in seconds > +timeout = 60 > + > +# debug, info, message, critical, error, fatal > +log_level = message > + > +# Every key / value under [device] is sent to HawkBit (target attributes), > +# and can be used in target filter. > +[device] > +mac_address = ff:ff:ff:ff:ff:ff > +hw_revision = 2 > +model = T1 > diff --git a/rules/rauc-hawkbit-updater.in b/rules/rauc-hawkbit-updater.in > new file mode 100644 > index 000000000..ff8d157a6 > --- /dev/null > +++ b/rules/rauc-hawkbit-updater.in > @@ -0,0 +1,15 @@ > +## SECTION=applications > + > +config RAUC_HAWKBIT_UPDATER > + tristate > + prompt "rauc-hawkbit-updater" > + select HOST_CMAKE > + select DBUS > + select JSON_GLIB > + select LIBCURL > + select LIBCURL_HTTP > + select LIBCURL_SSL > + select RAUC > + select RAUC_SERVICE > + help > + Daemon operating as an interface between the RAUC D-Bus API and the > hawkBit DDI API. > diff --git a/rules/rauc-hawkbit-updater.make b/rules/rauc-hawkbit-updater.make > new file mode 100644 > index 000000000..354fb8150 > --- /dev/null > +++ b/rules/rauc-hawkbit-updater.make > @@ -0,0 +1,72 @@ > +# -*-makefile-*- > +# > +# Copyright (C) 2020 by Bastian Krause <[email protected]> > +# > +# For further information about the PTXdist project and license conditions > +# see the README file. > +# > + > +# > +# We provide this package > +# > +PACKAGES-$(PTXCONF_RAUC_HAWKBIT_UPDATER) += rauc-hawkbit-updater > + > +# > +# Paths and names > +# > +RAUC_HAWKBIT_UPDATER_VERSION := 2020-09-09-gb38f5a5 > +RAUC_HAWKBIT_UPDATER_MD5 := c2accd9bdcab813dbf9850e6ed63085e > +RAUC_HAWKBIT_UPDATER := > rauc-hawkbit-updater-$(RAUC_HAWKBIT_UPDATER_VERSION) > +RAUC_HAWKBIT_UPDATER_SUFFIX := tar.gz > +RAUC_HAWKBIT_UPDATER_URL := > https://github.com/rauc/rauc-hawkbit-updater/archive/$(RAUC_HAWKBIT_UPDATER).$(RAUC_HAWKBIT_UPDATER_SUFFIX) > +RAUC_HAWKBIT_UPDATER_SOURCE := > $(SRCDIR)/$(RAUC_HAWKBIT_UPDATER).$(RAUC_HAWKBIT_UPDATER_SUFFIX) > +RAUC_HAWKBIT_UPDATER_DIR := $(BUILDDIR)/$(RAUC_HAWKBIT_UPDATER) > +RAUC_HAWKBIT_UPDATER_LICENSE := LGPL-2.1-or-later > +RAUC_HAWKBIT_UPDATER_LICENSE_FILES := > file://LICENSE;md5=1a6d268fd218675ffea8be556788b780 > + > +# > ---------------------------------------------------------------------------- > +# Prepare > +# > ---------------------------------------------------------------------------- > + > +# > +# cmake > +# > +RAUC_HAWKBIT_UPDATER_CONF_TOOL := cmake > +RAUC_HAWKBIT_UPDATER_CONF_OPT := \ > + $(CROSS_CMAKE_USR) \ > + -DWITH_SYSTEMD=$(call ptx/onoff,PTXCONF_INITMETHOD_SYSTEMD) \ > + -DBUILD_DOC=OFF \ > + -DQA_BUILD=ON \ > + --with-systemdsystemunitdir=/usr/lib/systemd/system > + > +# > ---------------------------------------------------------------------------- > +# Target-Install > +# > ---------------------------------------------------------------------------- > + > +$(STATEDIR)/rauc-hawkbit-updater.targetinstall: > + @$(call targetinfo) > + > + @$(call install_init, rauc-hawkbit-updater) > + @$(call install_fixup, rauc-hawkbit-updater,PRIORITY,optional) > + @$(call install_fixup, rauc-hawkbit-updater,SECTION,base) > + @$(call install_fixup, rauc-hawkbit-updater,AUTHOR,"Bastian Krause > <[email protected]>") > + @$(call install_fixup, rauc-hawkbit-updater,DESCRIPTION,missing) > + > + @$(call install_copy, rauc-hawkbit-updater, 0, 0, 0755, -, \ > + /usr/bin/rauc-hawkbit-updater) > + > + @$(call install_alternative, rauc-hawkbit-updater, 0, 0, 0644, \ > + /etc/rauc-hawkbit-updater/config.conf) > + > +ifdef PTXCONF_INITMETHOD_SYSTEMD You should have a package option here. Michael > + @$(call install_alternative, rauc-hawkbit-updater, 0, 0, 0644, \ > + /usr/lib/systemd/system/rauc-hawkbit-updater.service) > + @$(call install_link, rauc-hawkbit-updater, > ../rauc-hawkbit-updater.service, \ > + > /usr/lib/systemd/system/multi-user.target.wants/rauc-hawkbit-updater.service) > +endif > + > + @$(call install_finish, rauc-hawkbit-updater) > + > + @$(call touch) > + > +# vim: syntax=make > -- > 2.28.0 > > > _______________________________________________ > ptxdist mailing list > [email protected] > To unsubscribe, send a mail with subject "unsubscribe" to > [email protected] > -- Pengutronix e.K. | | Steuerwalder Str. 21 | http://www.pengutronix.de/ | 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ ptxdist mailing list [email protected] To unsubscribe, send a mail with subject "unsubscribe" to [email protected]
