Signed-off-by: Bastian Krause <[email protected]> --- Changes since v1: - introduce RAUC_HAWKBIT_UPDATER_SYSTEMD_UNIT instead of using INITMETHOD_SYSTEMD --- .../etc/rauc-hawkbit-updater/config.conf | 43 +++++++++++ rules/rauc-hawkbit-updater.in | 26 +++++++ rules/rauc-hawkbit-updater.make | 72 +++++++++++++++++++ 3 files changed, 141 insertions(+) create mode 100644 projectroot/etc/rauc-hawkbit-updater/config.conf create mode 100644 rules/rauc-hawkbit-updater.in create mode 100644 rules/rauc-hawkbit-updater.make
diff --git a/projectroot/etc/rauc-hawkbit-updater/config.conf b/projectroot/etc/rauc-hawkbit-updater/config.conf new file mode 100644 index 000000000..a1dfa97ef --- /dev/null +++ b/projectroot/etc/rauc-hawkbit-updater/config.conf @@ -0,0 +1,43 @@ +[client] +# host or IP and optional port +hawkbit_server = 10.10.0.254:8080 + +# true = HTTPS, false = HTTP +ssl = false + +# validate ssl certificate (only use if ssl is true) +ssl_verify = false + +# Tenant id +tenant_id = DEFAULT + +# Target name (controller id) +target_name = test-target + +# Security token +auth_token = cb115a721af28f781b493fa467819ef5 + +# Or gateway_token can be used instead of auth_token +#gateway_token = cb115a721af28f781b493fa467819ef5 + +# Temporay file RAUC bundle should be downloaded to +bundle_download_location = /tmp/bundle.raucb + +# time in seconds to wait before retrying +retry_wait = 60 + +# connection timeout in seconds +connect_timeout = 20 + +# request timeout in seconds +timeout = 60 + +# debug, info, message, critical, error, fatal +log_level = message + +# Every key / value under [device] is sent to HawkBit (target attributes), +# and can be used in target filter. +[device] +mac_address = ff:ff:ff:ff:ff:ff +hw_revision = 2 +model = T1 diff --git a/rules/rauc-hawkbit-updater.in b/rules/rauc-hawkbit-updater.in new file mode 100644 index 000000000..4df4e84ed --- /dev/null +++ b/rules/rauc-hawkbit-updater.in @@ -0,0 +1,26 @@ +## SECTION=applications + +config RAUC_HAWKBIT_UPDATER + tristate + prompt "rauc-hawkbit-updater" + select HOST_CMAKE + select DBUS + select JSON_GLIB + select LIBCURL + select LIBCURL_HTTP + select LIBCURL_SSL + select RAUC + select RAUC_SERVICE + select SYSTEMD if RAUC_HAWKBIT_UPDATER_SYSTEMD_UNIT + help + Daemon operating as an interface between the RAUC D-Bus API and the hawkBit DDI API. + +if RAUC_HAWKBIT_UPDATER + +config RAUC_HAWKBIT_UPDATER_SYSTEMD_UNIT + bool + default y + depends on INITMETHOD_SYSTEMD + prompt "install and enable systemd service file" + +endif diff --git a/rules/rauc-hawkbit-updater.make b/rules/rauc-hawkbit-updater.make new file mode 100644 index 000000000..5a9bfce71 --- /dev/null +++ b/rules/rauc-hawkbit-updater.make @@ -0,0 +1,72 @@ +# -*-makefile-*- +# +# Copyright (C) 2020 by Bastian Krause <[email protected]> +# +# For further information about the PTXdist project and license conditions +# see the README file. +# + +# +# We provide this package +# +PACKAGES-$(PTXCONF_RAUC_HAWKBIT_UPDATER) += rauc-hawkbit-updater + +# +# Paths and names +# +RAUC_HAWKBIT_UPDATER_VERSION := 2020-09-09-gb38f5a5 +RAUC_HAWKBIT_UPDATER_MD5 := c2accd9bdcab813dbf9850e6ed63085e +RAUC_HAWKBIT_UPDATER := rauc-hawkbit-updater-$(RAUC_HAWKBIT_UPDATER_VERSION) +RAUC_HAWKBIT_UPDATER_SUFFIX := tar.gz +RAUC_HAWKBIT_UPDATER_URL := https://github.com/rauc/rauc-hawkbit-updater/archive/$(RAUC_HAWKBIT_UPDATER).$(RAUC_HAWKBIT_UPDATER_SUFFIX) +RAUC_HAWKBIT_UPDATER_SOURCE := $(SRCDIR)/$(RAUC_HAWKBIT_UPDATER).$(RAUC_HAWKBIT_UPDATER_SUFFIX) +RAUC_HAWKBIT_UPDATER_DIR := $(BUILDDIR)/$(RAUC_HAWKBIT_UPDATER) +RAUC_HAWKBIT_UPDATER_LICENSE := LGPL-2.1-or-later +RAUC_HAWKBIT_UPDATER_LICENSE_FILES := file://LICENSE;md5=1a6d268fd218675ffea8be556788b780 + +# ---------------------------------------------------------------------------- +# Prepare +# ---------------------------------------------------------------------------- + +# +# cmake +# +RAUC_HAWKBIT_UPDATER_CONF_TOOL := cmake +RAUC_HAWKBIT_UPDATER_CONF_OPT := \ + $(CROSS_CMAKE_USR) \ + -DWITH_SYSTEMD=$(call ptx/onoff,PTXCONF_RAUC_HAWKBIT_UPDATER_SYSTEMD_UNIT) \ + -DBUILD_DOC=OFF \ + -DQA_BUILD=ON \ + --with-systemdsystemunitdir=/usr/lib/systemd/system + +# ---------------------------------------------------------------------------- +# Target-Install +# ---------------------------------------------------------------------------- + +$(STATEDIR)/rauc-hawkbit-updater.targetinstall: + @$(call targetinfo) + + @$(call install_init, rauc-hawkbit-updater) + @$(call install_fixup, rauc-hawkbit-updater,PRIORITY,optional) + @$(call install_fixup, rauc-hawkbit-updater,SECTION,base) + @$(call install_fixup, rauc-hawkbit-updater,AUTHOR,"Bastian Krause <[email protected]>") + @$(call install_fixup, rauc-hawkbit-updater,DESCRIPTION,missing) + + @$(call install_copy, rauc-hawkbit-updater, 0, 0, 0755, -, \ + /usr/bin/rauc-hawkbit-updater) + + @$(call install_alternative, rauc-hawkbit-updater, 0, 0, 0644, \ + /etc/rauc-hawkbit-updater/config.conf) + +ifdef PTXCONF_RAUC_HAWKBIT_UPDATER_SYSTEMD_UNIT + @$(call install_alternative, rauc-hawkbit-updater, 0, 0, 0644, \ + /usr/lib/systemd/system/rauc-hawkbit-updater.service) + @$(call install_link, rauc-hawkbit-updater, ../rauc-hawkbit-updater.service, \ + /usr/lib/systemd/system/multi-user.target.wants/rauc-hawkbit-updater.service) +endif + + @$(call install_finish, rauc-hawkbit-updater) + + @$(call touch) + +# vim: syntax=make -- 2.28.0 _______________________________________________ ptxdist mailing list [email protected] To unsubscribe, send a mail with subject "unsubscribe" to [email protected]
