On Thu, Nov 11, 2021 at 10:52:49AM +0100, Christian Melki wrote:
> dump1090 from FlightAware is an ADS-B (Automatic Dependent 
> Surveillance-Broadcast).
> ADS-B is used by aircrafts to signal their presence.
> Using an RTL (very cheap) based SDR, you can easily build your own ADS-B 
> decoder.
> 
> Signed-off-by: Christian Melki <[email protected]>
> ---
>  .../dump1090fa-6.1/fix_cpufeatures_arch.patch | 61 ++++++++++++++
>  patches/dump1090fa-6.1/series                 |  1 +
>  rules/dump1090fa.in                           |  8 ++
>  rules/dump1090fa.make                         | 80 +++++++++++++++++++
>  4 files changed, 150 insertions(+)
>  create mode 100644 patches/dump1090fa-6.1/fix_cpufeatures_arch.patch
>  create mode 100644 patches/dump1090fa-6.1/series
>  create mode 100644 rules/dump1090fa.in
>  create mode 100644 rules/dump1090fa.make
> 
> diff --git a/patches/dump1090fa-6.1/fix_cpufeatures_arch.patch 
> b/patches/dump1090fa-6.1/fix_cpufeatures_arch.patch
> new file mode 100644
> index 000000000..270a35846
> --- /dev/null
> +++ b/patches/dump1090fa-6.1/fix_cpufeatures_arch.patch
> @@ -0,0 +1,61 @@
> +From 059e48b82beb4fb920cca977b02db1ceb48facb9 Mon Sep 17 00:00:00 2001
> +From: Oliver Jowett <[email protected]>
> +Date: Thu, 23 Sep 2021 13:23:17 +0800
> +Subject: [PATCH] Allow env vars (not only command line overrides) to set
> + CPUFEATURES_{ARCH,UNAME}. Change CPUFEATURES_{ARCH,UNAME} defaults to use
> + {ARCH,UNAME} values.
> +
> +Fixes #158
> +---
> + Makefile             | 8 ++++++--
> + Makefile.cpufeatures | 4 ++--
> + 2 files changed, 8 insertions(+), 4 deletions(-)
> +
> +diff --git a/Makefile b/Makefile
> +index a85d154c5..9d81ed157 100644
> +--- a/Makefile
> ++++ b/Makefile
> +@@ -39,7 +39,11 @@ else
> +   LIMESDR ?= no
> + endif
> + 
> +-UNAME := $(shell uname)
> ++HOST_UNAME := $(shell uname)
> ++HOST_ARCH := $(shell uname -m)
> ++
> ++UNAME ?= $(HOST_UNAME)
> ++ARCH ?= $(HOST_ARCH)
> + 
> + ifeq ($(UNAME), Linux)
> +   CPPFLAGS += -D_DEFAULT_SOURCE
> +@@ -150,7 +154,6 @@ endif
> + ## starch (runtime DSP code selection) mix, architecture-specific
> + ##
> + 
> +-ARCH ?= $(shell uname -m)
> + ifneq ($(CPUFEATURES),yes)
> +   # need to be able to detect CPU features at runtime to enable any 
> non-standard compiler flags
> +   STARCH_MIX := generic
> +@@ -180,6 +183,7 @@ include dsp/generated/makefile.$(STARCH_MIX)
> + showconfig:
> +     @echo "Building with:" >&2
> +     @echo "  Version string:  $(DUMP1090_VERSION)" >&2
> ++    @echo "  Architecture:    $(ARCH)" >&2
> +     @echo "  DSP mix:         $(STARCH_MIX)" >&2
> +     @echo "  RTLSDR support:  $(RTLSDR)" >&2
> +     @echo "  BladeRF support: $(BLADERF)" >&2
> +diff --git a/Makefile.cpufeatures b/Makefile.cpufeatures
> +index 8c3b8418d..6b4289978 100644
> +--- a/Makefile.cpufeatures
> ++++ b/Makefile.cpufeatures
> +@@ -2,8 +2,8 @@
> + 
> + # cmake integration is a little tricky, so let's do this by hand for now
> + 
> +-CPUFEATURES_UNAME := $(shell uname)
> +-CPUFEATURES_ARCH := $(shell uname -m)
> ++CPUFEATURES_UNAME ?= $(UNAME)
> ++CPUFEATURES_ARCH ?= $(ARCH)
> + 
> + CPUFEATURES_OBJS := cpu_features/src/filesystem.o 
> cpu_features/src/stack_line_reader.o cpu_features/src/string_view.o
> + CPUFEATURES_CFLAGS := -std=c99 -O -g -DSTACK_LINE_READER_BUFFER_SIZE=1024 
> -DNDEBUG
> diff --git a/patches/dump1090fa-6.1/series b/patches/dump1090fa-6.1/series
> new file mode 100644
> index 000000000..75a7aa6dc
> --- /dev/null
> +++ b/patches/dump1090fa-6.1/series
> @@ -0,0 +1 @@
> +fix_cpufeatures_arch.patch
> diff --git a/rules/dump1090fa.in b/rules/dump1090fa.in
> new file mode 100644
> index 000000000..5738ba17e
> --- /dev/null
> +++ b/rules/dump1090fa.in
> @@ -0,0 +1,8 @@
> +## SECTION=networking
> +
> +menuconfig DUMP1090FA
> +     tristate
> +     prompt "dump1090fa                    "

no tabs, just spaces to align the prompt.

> +     select LIBRTLSDR
> +     help
> +       FlightAware MODE-S/ADS-B decoder.
> \ No newline at end of file
> diff --git a/rules/dump1090fa.make b/rules/dump1090fa.make
> new file mode 100644
> index 000000000..53d44791b
> --- /dev/null
> +++ b/rules/dump1090fa.make
> @@ -0,0 +1,80 @@
> +# -*-makefile-*-
> +#
> +# Copyright (C) 2021 by Christian Melki <[email protected]>
> +#
> +# For further information about the PTXdist project and license conditions
> +# see the README file.
> +#
> +
> +#
> +# We provide this package
> +#
> +PACKAGES-$(PTXCONF_DUMP1090FA) += dump1090fa
> +
> +#
> +# Paths and names
> +#
> +DUMP1090FA_VERSION   := 6.1
> +DUMP1090FA_MD5               := a7cb661bc23974f8bf7650ce26b6e0be
> +DUMP1090FA           := dump1090fa-$(DUMP1090FA_VERSION)
> +DUMP1090FA_SUFFIX    := tar.gz
> +DUMP1090FA_URL               := 
> https://github.com/flightaware/dump1090/archive/refs/tags/v$(DUMP1090FA_VERSION).$(DUMP1090FA_SUFFIX)
> +DUMP1090FA_SOURCE    := $(SRCDIR)/$(DUMP1090FA).$(DUMP1090FA_SUFFIX)
> +DUMP1090FA_DIR               := $(BUILDDIR)/$(DUMP1090FA)
> +DUMP1090FA_LICENSE   := GPL-2.0-only
> +
> +# 
> ----------------------------------------------------------------------------
> +# Prepare
> +# 
> ----------------------------------------------------------------------------
> +
> +ifdef PTXCONF_ARCH_X86
> +DUMP1090FA_ARCH              := x86
> +ifdef PTXCONF_ARCH_X86_64
> +DUMP1090FA_ARCH              := x86_64
> +endif
> +endif
> +ifdef PTXCONF_ARCH_ARM
> +DUMP1090FA_ARCH              := arm
> +endif
> +ifdef PTXCONF_ARCH_ARM64
> +DUMP1090FA_ARCH              := aarch64
> +endif

Use PTXCONF_ARCH_STRING to start with. Take a look at what nss.make does.
You can probably just copy it. That should simplify this a bit.

> +
> +DUMP1090FA_CONF_TOOL := NO
> +DUMP1090FA_MAKE_ENV := \
> +     $(CROSS_ENV) \
> +     BLADERF=no \
> +     LIMESDR=no \
> +     HACKRF=no \
> +     RTLSDR=yes \
> +     ARCH=$(DUMP1090FA_ARCH) \
> +     CPUFEATURES_ARCH=$(DUMP1090FA_ARCH) \
> +     CPUFEATURES_UNAME="Linux"
> +
> +# 
> ----------------------------------------------------------------------------
> +# Install
> +# 
> ----------------------------------------------------------------------------
> +
> +$(STATEDIR)/dump1090fa.install:
> +     @$(call targetinfo)
> +     @install -vD -m 755 $(DUMP1090FA_DIR)/dump1090 
> $(DUMP1090FA_PKGDIR)/usr/bin/dump1090-fa
> +     $(call touch)
> +
> +# 
> ----------------------------------------------------------------------------
> +# Target-Install
> +# 
> ----------------------------------------------------------------------------
> +
> +$(STATEDIR)/dump1090fa.targetinstall:
> +     @$(call targetinfo)
> +     @$(call install_init, dump1090fa)
> +     @$(call install_fixup, dump1090fa,PRIORITY,optional)
> +     @$(call install_fixup, dump1090fa,SECTION,base)
> +     @$(call install_fixup, dump1090fa,AUTHOR,"Christian Melki 
> <[email protected]>")
> +     @$(call install_fixup, dump1090fa,DESCRIPTION,missing)

One empty line here.

Michael

> +     @$(call install_copy, dump1090fa, 0, 0, 0755, -, /usr/bin/dump1090-fa)
> +
> +     @$(call install_finish, dump1090fa)
> +
> +     @$(call touch)
> +
> +# vim: syntax=make
> -- 
> 2.30.2
> 
> 
> _______________________________________________
> ptxdist mailing list
> [email protected]
> To unsubscribe, send a mail with subject "unsubscribe" to 
> [email protected]
> 

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
ptxdist mailing list
[email protected]
To unsubscribe, send a mail with subject "unsubscribe" to 
[email protected]

Reply via email to