On 11/25/21 16:32, Michael Olbrich wrote:
> On Thu, Nov 18, 2021 at 02:49:31PM +0100, Christian Melki wrote:
>> dump1090 from FlightAware is an ADS-B decoder
>> (Automatic Dependent Surveillance-Broadcast).
>> ADS-B is used by aircrafts to signal their presence.
>> Using an RTL (very cheap) based SDR (Software Defined Radio),
>> you can easily build your own ADS-B decoder.
> 
> You ignored all my review feedback.
> 
> Michael
> 

Oops! Sorry. Wasn't my intention.

>> Signed-off-by: Christian Melki <[email protected]>
>> ---
>>  .../dump1090fa-6.1/fix_cpufeatures_arch.patch | 61 ++++++++++++++
>>  patches/dump1090fa-6.1/series                 |  2 +
>>  rules/dump1090fa.in                           |  8 ++
>>  rules/dump1090fa.make                         | 82 +++++++++++++++++++
>>  4 files changed, 153 insertions(+)
>>  create mode 100644 patches/dump1090fa-6.1/fix_cpufeatures_arch.patch
>>  create mode 100644 patches/dump1090fa-6.1/series
>>  create mode 100644 rules/dump1090fa.in
>>  create mode 100644 rules/dump1090fa.make
>>
>> diff --git a/patches/dump1090fa-6.1/fix_cpufeatures_arch.patch 
>> b/patches/dump1090fa-6.1/fix_cpufeatures_arch.patch
>> new file mode 100644
>> index 000000000..270a35846
>> --- /dev/null
>> +++ b/patches/dump1090fa-6.1/fix_cpufeatures_arch.patch
>> @@ -0,0 +1,61 @@
>> +From 059e48b82beb4fb920cca977b02db1ceb48facb9 Mon Sep 17 00:00:00 2001
>> +From: Oliver Jowett <[email protected]>
>> +Date: Thu, 23 Sep 2021 13:23:17 +0800
>> +Subject: [PATCH] Allow env vars (not only command line overrides) to set
>> + CPUFEATURES_{ARCH,UNAME}. Change CPUFEATURES_{ARCH,UNAME} defaults to use
>> + {ARCH,UNAME} values.
>> +
>> +Fixes #158
>> +---
>> + Makefile             | 8 ++++++--
>> + Makefile.cpufeatures | 4 ++--
>> + 2 files changed, 8 insertions(+), 4 deletions(-)
>> +
>> +diff --git a/Makefile b/Makefile
>> +index a85d154c5..9d81ed157 100644
>> +--- a/Makefile
>> ++++ b/Makefile
>> +@@ -39,7 +39,11 @@ else
>> +   LIMESDR ?= no
>> + endif
>> + 
>> +-UNAME := $(shell uname)
>> ++HOST_UNAME := $(shell uname)
>> ++HOST_ARCH := $(shell uname -m)
>> ++
>> ++UNAME ?= $(HOST_UNAME)
>> ++ARCH ?= $(HOST_ARCH)
>> + 
>> + ifeq ($(UNAME), Linux)
>> +   CPPFLAGS += -D_DEFAULT_SOURCE
>> +@@ -150,7 +154,6 @@ endif
>> + ## starch (runtime DSP code selection) mix, architecture-specific
>> + ##
>> + 
>> +-ARCH ?= $(shell uname -m)
>> + ifneq ($(CPUFEATURES),yes)
>> +   # need to be able to detect CPU features at runtime to enable any 
>> non-standard compiler flags
>> +   STARCH_MIX := generic
>> +@@ -180,6 +183,7 @@ include dsp/generated/makefile.$(STARCH_MIX)
>> + showconfig:
>> +    @echo "Building with:" >&2
>> +    @echo "  Version string:  $(DUMP1090_VERSION)" >&2
>> ++   @echo "  Architecture:    $(ARCH)" >&2
>> +    @echo "  DSP mix:         $(STARCH_MIX)" >&2
>> +    @echo "  RTLSDR support:  $(RTLSDR)" >&2
>> +    @echo "  BladeRF support: $(BLADERF)" >&2
>> +diff --git a/Makefile.cpufeatures b/Makefile.cpufeatures
>> +index 8c3b8418d..6b4289978 100644
>> +--- a/Makefile.cpufeatures
>> ++++ b/Makefile.cpufeatures
>> +@@ -2,8 +2,8 @@
>> + 
>> + # cmake integration is a little tricky, so let's do this by hand for now
>> + 
>> +-CPUFEATURES_UNAME := $(shell uname)
>> +-CPUFEATURES_ARCH := $(shell uname -m)
>> ++CPUFEATURES_UNAME ?= $(UNAME)
>> ++CPUFEATURES_ARCH ?= $(ARCH)
>> + 
>> + CPUFEATURES_OBJS := cpu_features/src/filesystem.o 
>> cpu_features/src/stack_line_reader.o cpu_features/src/string_view.o
>> + CPUFEATURES_CFLAGS := -std=c99 -O -g -DSTACK_LINE_READER_BUFFER_SIZE=1024 
>> -DNDEBUG
>> diff --git a/patches/dump1090fa-6.1/series b/patches/dump1090fa-6.1/series
>> new file mode 100644
>> index 000000000..cc3b46e66
>> --- /dev/null
>> +++ b/patches/dump1090fa-6.1/series
>> @@ -0,0 +1,2 @@
>> +fix_cpufeatures_arch.patch
>> +
>> diff --git a/rules/dump1090fa.in b/rules/dump1090fa.in
>> new file mode 100644
>> index 000000000..5738ba17e
>> --- /dev/null
>> +++ b/rules/dump1090fa.in
>> @@ -0,0 +1,8 @@
>> +## SECTION=networking
>> +
>> +menuconfig DUMP1090FA
>> +    tristate
>> +    prompt "dump1090fa                    "
>> +    select LIBRTLSDR
>> +    help
>> +      FlightAware MODE-S/ADS-B decoder.
>> \ No newline at end of file
>> diff --git a/rules/dump1090fa.make b/rules/dump1090fa.make
>> new file mode 100644
>> index 000000000..88242b0fc
>> --- /dev/null
>> +++ b/rules/dump1090fa.make
>> @@ -0,0 +1,82 @@
>> +# -*-makefile-*-
>> +#
>> +# Copyright (C) 2021 by Christian Melki <[email protected]>
>> +#
>> +# For further information about the PTXdist project and license conditions
>> +# see the README file.
>> +#
>> +
>> +#
>> +# We provide this package
>> +#
>> +PACKAGES-$(PTXCONF_DUMP1090FA) += dump1090fa
>> +
>> +#
>> +# Paths and names
>> +#
>> +DUMP1090FA_VERSION          := 6.1
>> +DUMP1090FA_MD5                      := a7cb661bc23974f8bf7650ce26b6e0be
>> +DUMP1090FA                  := dump1090fa-$(DUMP1090FA_VERSION)
>> +DUMP1090FA_SUFFIX           := tar.gz
>> +DUMP1090FA_URL                      := 
>> https://github.com/flightaware/dump1090/archive/refs/tags/v$(DUMP1090FA_VERSION).$(DUMP1090FA_SUFFIX)
>> +DUMP1090FA_SOURCE           := $(SRCDIR)/$(DUMP1090FA).$(DUMP1090FA_SUFFIX)
>> +DUMP1090FA_DIR                      := $(BUILDDIR)/$(DUMP1090FA)
>> +DUMP1090FA_LICENSE          := GPL-2.0-only
>> +DUMP1090FA_LICENSE_FILES    := \
>> +    file://COPYING;md5=751419260aa954499f7abaabaa882bbe
>> +
>> +# 
>> ----------------------------------------------------------------------------
>> +# Prepare
>> +# 
>> ----------------------------------------------------------------------------
>> +
>> +ifdef PTXCONF_ARCH_X86
>> +DUMP1090FA_ARCH             := x86
>> +ifdef PTXCONF_ARCH_X86_64
>> +DUMP1090FA_ARCH             := x86_64
>> +endif
>> +endif
>> +ifdef PTXCONF_ARCH_ARM
>> +DUMP1090FA_ARCH             := arm
>> +endif
>> +ifdef PTXCONF_ARCH_ARM64
>> +DUMP1090FA_ARCH             := aarch64
>> +endif
>> +
>> +DUMP1090FA_CONF_TOOL := NO
>> +DUMP1090FA_MAKE_ENV := \
>> +    $(CROSS_ENV) \
>> +    BLADERF=no \
>> +    LIMESDR=no \
>> +    HACKRF=no \
>> +    RTLSDR=yes \
>> +    ARCH=$(DUMP1090FA_ARCH) \
>> +    CPUFEATURES_ARCH=$(DUMP1090FA_ARCH) \
>> +    CPUFEATURES_UNAME="Linux"
>> +
>> +# 
>> ----------------------------------------------------------------------------
>> +# Install
>> +# 
>> ----------------------------------------------------------------------------
>> +
>> +$(STATEDIR)/dump1090fa.install:
>> +    @$(call targetinfo)
>> +    @install -vD -m 755 $(DUMP1090FA_DIR)/dump1090 
>> $(DUMP1090FA_PKGDIR)/usr/bin/dump1090-fa
>> +    $(call touch)
>> +
>> +# 
>> ----------------------------------------------------------------------------
>> +# Target-Install
>> +# 
>> ----------------------------------------------------------------------------
>> +
>> +$(STATEDIR)/dump1090fa.targetinstall:
>> +    @$(call targetinfo)
>> +    @$(call install_init, dump1090fa)
>> +    @$(call install_fixup, dump1090fa,PRIORITY,optional)
>> +    @$(call install_fixup, dump1090fa,SECTION,base)
>> +    @$(call install_fixup, dump1090fa,AUTHOR,"Christian Melki 
>> <[email protected]>")
>> +    @$(call install_fixup, dump1090fa,DESCRIPTION,missing)
>> +    @$(call install_copy, dump1090fa, 0, 0, 0755, -, /usr/bin/dump1090-fa)
>> +
>> +    @$(call install_finish, dump1090fa)
>> +
>> +    @$(call touch)
>> +
>> +# vim: syntax=make
>> -- 
>> 2.30.2
>>
>>
>> _______________________________________________
>> ptxdist mailing list
>> [email protected]
>> To unsubscribe, send a mail with subject "unsubscribe" to 
>> [email protected]
>>
> 


_______________________________________________
ptxdist mailing list
[email protected]
To unsubscribe, send a mail with subject "unsubscribe" to 
[email protected]

Reply via email to