Thanks, applied as 0c779a60e50c40d522b1e9c20b5c75b2e57fde5a. Michael
[sent from post-receive hook] On Fri, 10 Dec 2021 14:07:04 +0100, Alexander Dahl <[email protected]> wrote: > Recent U-Boot v2021.10 introduced a target-independent config option to > build host tools with OpenSSL support (for signed images). Because we > can not depend on some of U-Boot's Kconfig options we follow the same > approach as kernel and barebox package and add a menu switch for that. > > Signed-off-by: Alexander Dahl <[email protected]> > Message-Id: <[email protected]> > Signed-off-by: Michael Olbrich <[email protected]> > > diff --git a/platforms/u-boot.in b/platforms/u-boot.in > index 4ddf3b3fb02d..d5410e4a16df 100644 > --- a/platforms/u-boot.in > +++ b/platforms/u-boot.in > @@ -2,6 +2,7 @@ > > menuconfig U_BOOT > select BOOTLOADER > + select HOST_OPENSSL if U_BOOT_NEEDS_HOST_OPENSSL > prompt "U-Boot " > bool > > @@ -247,5 +248,17 @@ config U_BOOT_INSTALL_U_BOOT_STM32 > platform image directory. Say yes if you are building for STM32MP1 > SOCs. > > +config U_BOOT_NEEDS_HOST_OPENSSL > + prompt "needs host OpenSSL" > + bool > + help > + Newer host U-Boot tools can sign images and use OpenSSL for that. > + It is most probably needed if your board config does not disable > + CONFIG_TOOLS_LIBCRYPTO. > + > + Select this if you're unsure, as it won't hurt. > + It might just increase the build time, if no other package has > + host openssl selected. > + > endif > _______________________________________________ ptxdist mailing list [email protected] To unsubscribe, send a mail with subject "unsubscribe" to [email protected]
